Bike Gallery

[DanielS]

Are those wheels 650s? Or 24"? Photo looked very weird at first glance!

[williamsf1]

yep wheels are 650c

The gap is intentional, as it was made as the Pave bike.... so bigger clearance, and yes it has plush flex in the rougher stuff, but goes like stink on the smooth!!

If I tried I think I could get the weight down to about 6.1kg without too much effort, but right now she is very happy....

I do love it without the stickers... its hot!!!

photo was taken (AT) f1.8 so there is very little DOF! so that makes it look purty...

[smileNnod]

Trek Madone 4.7
Very happy with the new bits.
Garmin Edge 500
Pro Race 3 Tyres (although I had 2 flats first ride out)
Ultegra pedals
Fizik seat

[matth]

Very nice... I like the paint scheme. What is the sensor on the forks as it's not the normal Garmin speed / cadence sensor which mounts on the chain stay ?

[smileNnod]

Very nice... I like the paint scheme. What is the sensor on the forks as it's not the normal Garmin speed / cadence sensor which mounts on the chain stay ?

photo taken the morning I replaced the Polar setup to the Garmin Edge 500. (best bike bit anyone could purchase)

[matth]

Very nice... I like the paint scheme. What is the sensor on the forks as it's not the normal Garmin speed / cadence sensor which mounts on the chain stay ?

photo taken the morning I replaced the Polar setup to the Garmin Edge 500. (best bike bit anyone could purchase)

doh... I was wondering

Agree on the Garmin... love mine.

[Dave R32]

Nice looking Madone

Cheers
Dave.

[familyguy]

Pro Race 3 Tyres (although I had 2 flats first ride out)

Nice bike, but get used to this!

Jim

[crog]

New baby my first foray into MTB world





A new baby for the stable have not ridden yet. Still a virgin and still has bell.

Opinions ??

[Wayfarer]

Crog, that's a really nice colour; didnt realise felt made such great looking mountain bikes. Seems to have a decent kit as well, but it's about time to ride it hard and dirty, and 'deflower' it. Sure you'll get hot and sweaty, but that's kinda the point

[Baldy]

Yeah mate that Felt is very nice, I only hear good things about them and seriously considered one when I was in the market for a hardtail. I ended up finding a deal on something else to good to pass up but I really rate them.

Your going to freakin love it

Can ya tell me a bit more about those barends? I use them as well, same brand but I have not seen that shape before? interesting....

[crog]

Yeah haapy with the Felt and baby blue colour A little different from the norm and got it at goldcross for $1550 with pedals and bar ends chaper as it is an 09 model

Not being to up to speed on the MTB spec side of things (I know more about roadys) it appears to have good gear on it although carbon stays worry me a little bit

bar ends from goldcross and specs from website below pics

Only concerns are the hydraulic breaks and forks with respect servicing etc. Will need to download manuals









from spec sheet not sure if anything needs upgrading

FRAME
Felt Superlight XC Series 7005 Double-Butted Aluminum, with Carbon Fiber Seat Stays w/Increased Tire Clearance, Monostay Design, 45mm Integrated Head Tube, Replaceable Derailleur Hanger, Disc-Brake Specific

FORK
Recon SL Solo Air with TurnKey lockout, Forged 6061 T-6 aluminum, Alloy Steerer, Disc brake specific Magnesium lower. 7000 series 32mm straight wall aluminum stanchions. 3.86 lbs. Disc Brake Specific Lower Legs, Includes Poploc Remote

HEADSET
Integrated 1-1/8" Aheadset--Cane Creek Type 45 Degree Sealed Cartridge Bearing, with Alloy Laser Top Cap, Custom Curved 1 x 15mm + 2 x 5mm Straight Washers

STEM
FELT RXC STEM Oversized 6061 Alloy, 3D Cold-Forged + CNC,1-1/8" Threadless 4-Bolt, 5 Degree Rise. 31.8mm Bar Bore CP Hardware. Extensions: 15.5=90mm; 17.5=100mm; 19.5=110mm; 21.5=120mm

HANDLEBAR
OVERSIZED 31.8mm Butted Aluminum Flat Bar, 5 degree Bend, Width: 600mm, 140 grams

GRIPS:
Felt Dual-Density Extra-Soft & Sticky (Recipe #25)center with Hard Outer Durometer, 130mm Length, 30mm OD, Grey outer/Blk grip section

BAR END CAPS
Rubber Plugs w/ Felt logo Bubble Decal, Included w/Grip

SHIFTERS
SRAM X-7 Trigger 27 speed Shifter

FRONT DERAILLEUR
Shimano Deore FD-M531 Dual Pull

REAR DERAILLEUR
Sram X-9 with X.O. styling 212grams

CRANKSET
Truvativ Blaze 3.0 3-Piece Crank w/Howitzer M15 Axle Interface for External Bearing BB, Cold Forged Aluminum, 42/32/22T Steel Rings, Lengths: 15.5=170mm; 17.5-21.5=175mm

BB SET
Truvativ Howitzer M15 Cr-Mo Axle with External Bearings

FREEWHEEL
SRAM PG-950, 9-Speed Cassette, 11-32T

CHAIN:
Sram PC-951 (9-Speed) Silver Outer

BRAKE LEVERS
Avid Juicy 5

BRAKES:
Avid Juicy 5 Hydraulic, Rotors: 185mm Front; 160mm Rear

CABLES:
Custom Felt Cable Set, Standard Black Casing, Featuring CP Stamped Logos & FELT Rubber 2-Tone Tube Tops at Head Tube and One Red CNC Alloy ferrule Brake hose supplied with Brakeset

SADDLE:
Felt RXC Lite, Super Low Side Profile Look with Medium/Flat Top, Superlight Foam Double-Density Base, Silver Tubular Cr-Mo Rails

SEAT POST
Felt Alloy Micro-Adjust, 100% Black, 2014 Low-Profile Forged Head & Extruded Rall Clamps, 27.2mm x 350mm (CEN)

SEAT POST CLAMP
Felt Bolt-Type with Logo, Cold Forged + CNC, 6061 Aluminum, with Steel Barrel Nut Design, 31.8mm

F/HUB
Shimano FH-M475, 6-Bolt Type Rotor Mount, 32H, with Quick Release

R/HUB
Shimano FH-M475, 6-Bolt Type Rotor Mount, 9 Speed Cassette 32H, with Quick Release

RIMS
Mavic XM-317 Disc Doublewall, 26 x 1.5 x 32H, 23mm Width, Presta Valve, DISC Brake-Specific, Black Anodized With Single Eyelets

TIRE
Felt Devox RXC tire Low Knob RXC specific design, XXX Endurance Compound, 60 tpi case with Folding Tubeless ready bead, 26 x 2.0

SPOKES
Black Stainless 14G/15G double butted with Blk Brass Nipples

PEDALS
None

[stang1]

Another Trek ! a Trek Madonne 5.5 *a damn sweet deal for this whole lot*
Apologises for poor quality as it was off an iPhone. Fingers crossed met the posting pics requirement.

full Dura Ace grouppo
came with Conti Gp4000s tyres
LooK keo carbon pedals



How my babe travels


edge 500 from highlytunedatheletes for $429 free postage!


Sideview 1


Sideview 2


Whats left of "Botranger" (Ritchey Stem/ FSA compact Wing - changed the ritchey due to drop angle / pro fit by ChurchillCyc)


Last but not least, Fulcrum 1 wheelset !

[foo on patrol]

Clean looking bike there Stang

[wibbit]

Cervelo S2

[stang1]

Clean looking bike there Stang

Thanks, just had it serviced and cleaned before tooking the pic

Nice s2 there wibbit. LOVE the white/red feature

[grt046]

Think it is about time I shared a few pics of my pride and joy.

Giant Defy Advanced 2

Standard specification as per http://www.giant-bicycles.com/en-au/bik ... 306/37460/ with one slight change, swapped the standard cassette for 12/27 to give the old bugger a little help on the hills.
Carbon bottle cages
Polar 200CS CAD computer (Includes HR and Cadence sensors)
Cateye tail light

A few images:

[foo on patrol]

Hey Wibbit, those angles are really laid back, what's it like to ride.

[foo on patrol]

You'll be right GRT once you get some Ks under the belt, nice bike!

[crog]

The giants are really starting to look the buisness but what is with the black spoke protector

[grt046]

what is with the black spoke protector

nOObies badge of office

[Richard.L]

The giants are really starting to look the buisness but what is with the black spoke protector

The new mavic disc wheel

[The Womble]

Still have to properly polish the stripped fram, the San Marco Squdara saddle arrived in blue instead of yellow, and Im still waiting to apply new yellow bar tape and Rollamajig. Slowly slowly for my first build. Record 11speed next year too

[The Womble]

Crap! In photobucket the right of both shots arent cut off!

[MountGower]

Go to the bottom right hand side of your browser and reduce the screen size to 95%, maybe 90. Or reduce the size on photobucket.