Royal Pde cycle lane bike monitoring

User avatar
embee8
Posts: 69
Joined: Tue Mar 27, 2012 1:10 pm
Location: Perth, WA

Royal Pde cycle lane bike monitoring

Postby embee8 » Tue Nov 21, 2017 1:00 pm

This is a community announcement:
EDIT: On Sunday 26th November (brought forward from Mon 27th) we will be re-installing the sensors to monitor bike riders on the Royal Pde northbound cycle lane, just north of Gatehouse St.
The cycle lane was realigned by [edit] City of Melbourne a few months ago and we (MetroCount) manage VicRoads' bike monitoring sites and assist with their maintenance. This is a VicRoads monitoring site.
The works should occur between the hours of 10am and 3pm to limit disruptions but we ask that patience is observed :D not only during that time but for works that may begin earlier or finish later.
Thank you!
Last edited by embee8 on Thu Nov 23, 2017 1:48 pm, edited 1 time in total.
Trek Domane 5.2
Giant CRX4

fat and old
Posts: 6179
Joined: Sat Aug 30, 2014 12:06 pm
Location: Mill Park

Re: Royal Pde cycle lane bike monitoring

Postby fat and old » Thu Nov 23, 2017 9:43 am

Good bloke, announcing that. Just a few things

1. It was actually re-aligned by the City of Melbourne.

2. For gods sake, get the Traffic Management signage right.....there's at least one poster here that uses that road and you will be crucified if you get it wrong

3. When erecting your signage, DO NOT USE CYCLIST DISMOUNT SIGNAGE, at any cost. Same as above.

Have a nice day :D

User avatar
embee8
Posts: 69
Joined: Tue Mar 27, 2012 1:10 pm
Location: Perth, WA

Re: Royal Pde cycle lane bike monitoring

Postby embee8 » Thu Nov 23, 2017 1:49 pm

Hi, thanks for that ... agree with the signage point. Will advise the traffic mgmt guys and see what we can do.
Have a great day! and keep on pedalling :)
Trek Domane 5.2
Giant CRX4

Who is online

Users browsing this forum: No registered users