Thorn Raven Nomad coming together
- RonK
- Posts: 11508
- Joined: Mon Aug 24, 2009 2:08 pm
- Location: If you need to know, ask me
- Contact:
Re: Thorn Raven Nomad coming together
Postby RonK » Sat Oct 29, 2011 8:48 pm
Personally I disdain kickstands, but since the Pioneer frame incorporates a mount on the chainstay for a two-bolt Pletscher Comp I've decided to use it. Previously I've been happy to use a Clickstand.
- Aushiker
- Posts: 22395
- Joined: Tue Jun 05, 2007 1:55 pm
- Location: Walyalup land
- Contact:
Re: Thorn Raven Nomad coming together
Postby Aushiker » Sun Oct 30, 2011 1:12 am
yep and then they go on to say ...RonK wrote:While the discussion about Thorns attitude to kickstands rages, it's interesting to note that Surly recently posted a rant against them on the Surly blog. The resulting outrage prompted a further explanation in an attempt to placate the angry mob, whom it seems must have been preparing for a lynching.
which I assume is this one ...We recommend the use of two leg kickstands such as the Pletscher. Such a design helps reduce the potential for chainstay flex compared to that which a loaded bike leaning on a kickstand single leg can impose. And because of the extra leg and the placement, they tend to be the most stable in our experience.
Andrew
Aushiker.com
- RonK
- Posts: 11508
- Joined: Mon Aug 24, 2009 2:08 pm
- Location: If you need to know, ask me
- Contact:
Re: Thorn Raven Nomad coming together
Postby RonK » Sun Oct 30, 2011 8:49 am
Surly were right. As the blog says - they're *ugly...Aushiker wrote:yep and then they go on to say ...
We recommend the use of two leg kickstands such as the Pletscher. Such a design helps reduce the potential for chainstay flex compared to that which a loaded bike leaning on a kickstand single leg can impose. And because of the extra leg and the placement, they tend to be the most stable in our experience.
- il padrone
- Posts: 22931
- Joined: Mon Apr 07, 2008 11:57 pm
- Location: Heading for home.
Re: Thorn Raven Nomad coming together
Postby il padrone » Sun Oct 30, 2011 6:45 pm
That is the exact stand my mate Rob used on our outback tour. He found it to be decidedly unstable for a loaded touring bike..... to the extent that he came to hate it by the end of the tour.Aushiker wrote:which I assume is this one ...We recommend the use of two leg kickstands such as the Pletscher. Such a design helps reduce the potential for chainstay flex compared to that which a loaded bike leaning on a kickstand single leg can impose. And because of the extra leg and the placement, they tend to be the most stable in our experience.
"An unjustified and unethical imposition on a healthy activity."
- gregmacc
- Posts: 155
- Joined: Fri Apr 09, 2010 11:33 pm
- Location: Adelaide
Re: Thorn Raven Nomad coming together
Postby gregmacc » Tue Nov 08, 2011 11:21 am
Cheers
Greg
-
- Posts: 5470
- Joined: Mon Mar 12, 2007 2:23 pm
- Location: Yangebup
Re: Thorn Raven Nomad coming together
Postby Baalzamon » Tue Nov 08, 2011 3:21 pm
I don't know about ip, but I have the same mirror and got it from SJS cycles, however I just found that flyingfurniture has the same mirrors and for a cheaper price, might be an idea to ask Ian about them. I'm getting 2 more mirrors on my new recumbent I've just orderedgregmacc wrote:... ip ... How is the grip bell going? Are they a quality item? Did you need to cut down the Ergon length to reduce the hand stretch to the brake lever? ... AND ... Where did you buy the mirror from?
Cheers
Greg
- gregmacc
- Posts: 155
- Joined: Fri Apr 09, 2010 11:33 pm
- Location: Adelaide
- il padrone
- Posts: 22931
- Joined: Mon Apr 07, 2008 11:57 pm
- Location: Heading for home.
Re: Thorn Raven Nomad coming together
Postby il padrone » Tue Nov 08, 2011 8:15 pm
Higregmacc wrote:... ip ... How is the grip bell going? Are they a quality item? Did you need to cut down the Ergon length to reduce the hand stretch to the brake lever? ... AND ... Where did you buy the mirror from?
The gripbell is fine, working well. It's a Mirrycle bell, so pretty good quality. The only negative is that its ding is a bit tinny and high pitched. I do like the 'ding DONG' of the lowrider Big Bell on the Shogun - but it's a bit of a monster to carry on a touring bike .
The Ergon grips are as supplied. I like the wider grips, gives me the chance to place the hands wide on the wings, or tuck in close for head-wind riding and fast descents. The Cyclestar mirror is a B&M component that I bought from SJS Cycles. Next time I need one I'll keep Flying Furniture in mind. They stock them for their velocycles of course.
"An unjustified and unethical imposition on a healthy activity."
- rifraf
- Posts: 3845
- Joined: Fri Apr 15, 2011 5:55 pm
- Location: Two Rocks, WA
Re: Thorn Raven Nomad coming together
Postby rifraf » Wed Nov 09, 2011 1:13 am
Hi IP,il padrone wrote:
Next time I need one I'll keep Flying Furniture in mind. They stock them for their velocycles of course.
any chance of a link to the mirrors?
I'm having one of those days not being able to see the wood for the trees.
No probs finding
http://www.flyingfurniture.com.au/shop/ ... ccessories
Just no luck with their mirrors
Cheers
Aidan
-
- Posts: 5470
- Joined: Mon Mar 12, 2007 2:23 pm
- Location: Yangebup
Re: Thorn Raven Nomad coming together
Postby Baalzamon » Wed Nov 09, 2011 1:32 am
- rifraf
- Posts: 3845
- Joined: Fri Apr 15, 2011 5:55 pm
- Location: Two Rocks, WA
Re: Thorn Raven Nomad coming together
Postby rifraf » Wed Nov 09, 2011 1:36 am
Thanks for the heads up StuartBaalzamon wrote:Ah now with flyingfurniture I was informed by just4thehelliboutit that not all the stuff he has is on the website, so you will need to email him and ask.
- Slim
- Posts: 75
- Joined: Sun Feb 20, 2011 8:09 pm
- Location: Melbourne
Opportunity knocks
Postby Slim » Thu Nov 10, 2011 11:08 am
http://www.thorncycles.co.uk/forums/ind ... ;topicseen
Could be a bargain for someone thinking about a Nomad.
If you can handle the color.
- gregmacc
- Posts: 155
- Joined: Fri Apr 09, 2010 11:33 pm
- Location: Adelaide
Re: Thorn Raven Nomad coming together
Postby gregmacc » Mon Nov 14, 2011 12:39 pm
Thanks
Greg
- gregmacc
- Posts: 155
- Joined: Fri Apr 09, 2010 11:33 pm
- Location: Adelaide
Re: Thorn Raven Nomad coming together
Postby gregmacc » Mon Nov 14, 2011 12:55 pm
- il padrone
- Posts: 22931
- Joined: Mon Apr 07, 2008 11:57 pm
- Location: Heading for home.
Re: Thorn Raven Nomad coming together
Postby il padrone » Mon Nov 14, 2011 6:12 pm
Just decided that I don't trust the crack that is appearing in the nose of the Brooks Conquest, as I'm leading up to a major tour. So last week I did the Proofide treatment and fitted the Swift. I need to give it some riding time before we head off for 3 weeks in Tasmania on Dec 27th. The Swift looks loverly, but not a surprise - it's a good bit narrower and decidedly harder. It's going to be a long battle to break it in. The same saddle on my road bike has barely any more flex, after over 4000kms . However it has always been the right shape for me and given no discomfort. The Oppy showed me that it only really began to hurt the butt after 300kms (in one day).
"An unjustified and unethical imposition on a healthy activity."
-
- Posts: 727
- Joined: Fri Apr 03, 2009 8:33 pm
Re: Thorn Raven Nomad coming together
Postby ausrandoman » Mon Nov 14, 2011 9:07 pm
In any large group of loaded touring bikes, one can easily distinguish, at a great distance, the bikes that have a kickstand from those that do not. The bikes that do not have a kickstand will be scattered about, leaning on benches, trees, gates, fences, posts and inadequate shrubs. The bikes that have a kickstand will be lying on the ground.RonK wrote:
Personally I disdain kickstands.
I once went on tour with a fanatic who kept his hammer, two of his guy ropes and two of his tent pegs on top of his load ...
- il padrone
- Posts: 22931
- Joined: Mon Apr 07, 2008 11:57 pm
- Location: Heading for home.
Re: Thorn Raven Nomad coming together
Postby il padrone » Mon Nov 14, 2011 9:20 pm
Hmm.... ??ausrandoman wrote:The bikes that do not have a kickstand will be scattered about, leaning on benches, trees, gates, fences, posts and inadequate shrubs. The bikes that have a kickstand will be lying on the ground...
Not my experience .
"An unjustified and unethical imposition on a healthy activity."
- gregmacc
- Posts: 155
- Joined: Fri Apr 09, 2010 11:33 pm
- Location: Adelaide
Re: Thorn Raven Nomad coming together
Postby gregmacc » Mon Nov 14, 2011 11:02 pm
... most definitely not mine either ...il padrone wrote:Hmm.... ??ausrandoman wrote:The bikes that do not have a kickstand will be scattered about, leaning on benches, trees, gates, fences, posts and inadequate shrubs. The bikes that have a kickstand will be lying on the ground...
Not my experience .
- il padrone
- Posts: 22931
- Joined: Mon Apr 07, 2008 11:57 pm
- Location: Heading for home.
Re: Thorn Raven Nomad coming together
Postby il padrone » Mon Nov 14, 2011 11:15 pm
Centre-mount stands are generally less stable. Dual-leg stands have the one advantage that they lift the rear wheel and can be used as a workstand. This is also a disadvantage, as when the rear panniers are loaded it's the front wheel that lifts and the steering swings about. Centre-mounted side stands are particularly poor for loaded tourers, as when the bike is on the stand the steering will turn sideways and the angle of lean changes, causing the bike to topple.
Rear-stay-mounted side-stands are generally better. If the steering swings it has little effect on the stand. However some don't throw the leg out wide enough to correctly support a pannier load. The cheaper, frequently available pressed alloy designs are like this.
This is mine on the old bike - a Greenfields stand. Alloy and very light, but it has lasted for around 6-7 years so far. Note how much wider it swings. This is what gives better support and makes the bike very stable.
The stand on the Thorn Nomad is a Pletscher Zoom - even better at holding the bike fully loaded. Love it
"An unjustified and unethical imposition on a healthy activity."
- Aushiker
- Posts: 22395
- Joined: Tue Jun 05, 2007 1:55 pm
- Location: Walyalup land
- Contact:
Re: Thorn Raven Nomad coming together
Postby Aushiker » Tue Nov 15, 2011 1:27 am
Nor mine overall. In particular the stand on the Surly has worked well for me.gregmacc wrote:... most definitely not mine either ...il padrone wrote:Hmm.... ??ausrandoman wrote:The bikes that do not have a kickstand will be scattered about, leaning on benches, trees, gates, fences, posts and inadequate shrubs. The bikes that have a kickstand will be lying on the ground...
Not my experience .
The stand on the Bob trailer was more of an issue in combo with the mountain bike but I suspect that this was more an issue with weight distribution than the stand.
Andrew
Aushiker.com
- rifraf
- Posts: 3845
- Joined: Fri Apr 15, 2011 5:55 pm
- Location: Two Rocks, WA
Re: Thorn Raven Nomad coming together
Postby rifraf » Fri Nov 18, 2011 9:58 pm
I'm not positive but think they were different to one I spotted at SJS cycles today - suitable for drop handlebars
http://www.sjscycles.co.uk/gilles-berth ... prod27131/
Correct me if I'm wrong or its been posted before and I'll delete my post.
Cheers
Aidan
- Max
- Posts: 2895
- Joined: Wed Jun 18, 2008 1:29 pm
- Location: Brisbane
- Contact:
Re: Thorn Raven Nomad coming together
Postby Max » Sat Nov 19, 2011 1:16 pm
Max
Cycling is sometimes like bobbing for apples in a bucket full of dicks. - SydGuy
- rifraf
- Posts: 3845
- Joined: Fri Apr 15, 2011 5:55 pm
- Location: Two Rocks, WA
Re: Thorn Raven Nomad coming together
Postby rifraf » Sat Nov 19, 2011 11:23 pm
Your very welcome Max.Max wrote:I haven't seen that one before, rifraf, thanks for the link!
Max
Have you been perusing the web reviews of the Vivente Randonneur bike?
Spotted any good prices.
I had a look ages ago and thought they appeared well spec'ed.
Has anything else caught your eye?
Not sure what your ride is currently but if theres room for racks have you thought about
chucking on some lower gearing (chainrings and cassette) whilst you determine if touring regularly is for you.
A Mum and Daughter Taswegian holiday sounds just great.
Before my mother was struck down with dementia you couldn't have gotten her near a tent for all the tea in China.
And she was a big tea drinker!!!!
I did check out your current steed once ages ago and seem to remember a racing style bike with drops?
How did you go height wise next to Ronk as its rumored he may decide to sell the Sabbath Silk Route once he's got the Van Nicholas Pioneer
just how he wants it.
Cheers
Aidan
- Max
- Posts: 2895
- Joined: Wed Jun 18, 2008 1:29 pm
- Location: Brisbane
- Contact:
Re: Thorn Raven Nomad coming together
Postby Max » Sun Nov 20, 2011 1:43 pm
It's tough to find reviews on the Randonneur, but those I've found have all been positive. I think it's a really good value bike. I haven't really been looking at any other bikes. There's no real urgency about it for now.
My current commuter is a Specialized Dolce, with racks and panniers. It's running an Apex groupset (50/34, 11-32), which I think is about as low as it gets for road bike gearing. It does the job well, and yes, the plan is to use it for touring until a decision is made one way or the other whether touring is for me.
Ron's a touch taller than I am. I don't think his Silk Route would be a good fit for me. And yes, I was surreptitiously checking out his bike size
Max
Cycling is sometimes like bobbing for apples in a bucket full of dicks. - SydGuy
- il padrone
- Posts: 22931
- Joined: Mon Apr 07, 2008 11:57 pm
- Location: Heading for home.
Re: Thorn Raven Nomad coming together
Postby il padrone » Thu Nov 24, 2011 8:49 pm
Hmmm.....
"An unjustified and unethical imposition on a healthy activity."
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
Who is online
Users browsing this forum: No registered users
- All times are UTC+11:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.