Ricardo Appreciation Society

[Axle]

Hello,

Just signed up so this is my first post.

I've been going through this subject for the past few days yet still cannot properly identify my bike. I felt I was getting closer with those catalogues that RicardoMan posted but i'm still not sold, leaning towards Varsity perhaps??





If anyone can tell just by looking at it that'd be great, otherwise any specific things I should look at?
Also is there perhaps a link of things to be wary about with these bikes?

Thanks

[Axle]

I've been going through this subject for the past few days yet still cannot properly identify my bike. I felt I was getting closer with those catalogues that RicardoMan posted but i'm still not sold, leaning towards Varsity perhaps??

Just had a look at the bike and thought I'd add some more info.

Gear levers: Suntour
Brakes: Dia Compe
Rims: Weinman 27 x 1.1/4 "
Crank: Sugino
Serial: L6A0281
Derailers: Suntour

[jbchybridrider]

Keeping the legend alive.

[munga]

rad

[8/40Special]

Hi all,

A newbie here to old bikes. I found this old Ricardo at a garage sale on the weekend and took a punt that it might be one of the better models they made. It has frame no. L8E3253. So looking through this thread can I assume it was made in May 1988?

More importantly could someone help me out with the model name?

It has shimano SL brake calipers, Weinman brake levers, Shimano 105 shifters and Sakae SX cranks. There are Tange tube stickers on the frame.

The bottom bracket bearing is worn and it needs some work, but it doesn't look like a rubbish bike. Any thoughts?

I hope this photo link works!!


[url]<a href="http://www.flickr.com/photos/840special/8463686587/" title="IMG_2426 by 8/40Special, on Flickr"><img src="http://farm9.staticflickr.com/8516/8463686587_62c6265805.jpg" width="500" height="375" alt="IMG_2426"></a>[/url]

Thanks,

Scott

[munga]

http://www.flickr.com/photos/840special ... 8463686587



right click, "copy image url".
wrap url with [ img ] your url goes here [ /img ] tags

[HappyHumber]

More importantly could someone help me out with the model name?

My money would be on a Viva. Is there no indication of a model along either side of the top tube? I have seen a few with the model name all but scratched off - probably due to the quality of the stickers used and the way the previous owners have left theirs lent against things.
Yours looks to be the tallest in the Ricardo sizing... ~62cm. I hope youre 190cm+ tall

It has shimano SL brake calipers, Weinman brake levers, Shimano 105 shifters and Sakae SX cranks. There are Tange tube stickers on the frame.

What number Tange? The most commonly seen with these colours is the Nuovo from ~1988. These were Double Butted Tange No. 2
If this is a Viva, I'd say it's Tange 900. Whilst not fantastic, it's not gas pipe. Similar ilk at least to basic DB 4130.

I have a Plain Guage, Tange No. 5 Unbranded, but Leisure Products numbered frame. Older than this example though. Has no downtube shift bosses and above BB cable routing.

....but it doesn't look like a rubbish bike. Any thoughts?

Agree. Not a bad little first project bike. Good solid Aussie mass produced Roadie. One of the last of that breed, infact.

[url]<a href="http://www.flickr.com/photos/840special/8463686587/" title="IMG_2426 by 8/40Special, on Flickr"><img src="http://farm9.staticflickr.com/8516/8463686587_62c6265805.jpg" width="500" height="375" alt="IMG_2426"></a>[/url]
I hope this photo link works!!

Bit too much extra info there... you just needed:

Code: Select all

[img]http://farm9.staticflickr.com/8516/8463686587_62c6265805.jpg[/img]

Click "quote" on Munga's reply and copy & paste into Notepad or similar... you'll see the bit I just did here in green. Don't be afrain to hit "preview" when you're posting. It means you can check things before you submit properly.

[singlespeedscott]

I say it's a Viva.

[Ricardo1985]

^^ She's looking very nice, those old Roadmasters are quite heavy but have a nice comfortable ride quality and I really like the paint jobs. I hope you plan to keep it original and as immaculate as you can.

Definitely keeping it in original condition! Without question!

[8/40Special]

More importantly could someone help me out with the model name?

My money would be on a Viva. Is there no indication of a model along either side of the top tube? I have seen a few with the model name all but scratched off - probably due to the quality of the stickers used and the way the previous owners have left theirs lent against things.
Yours looks to be the tallest in the Ricardo sizing... ~62cm. I hope youre 190cm+ tall

Kym,

Yes, it is 62cm and to be honest it is on the tall side for myself, but I think I will have a go at cleaning it up and replacing the bottom bracket bearing first before I go further with it. There are no signs of any stickers along the top tube and the Tange stickers on the forks don't indicate what grade tubing it is made from. So I will go with it being a Viva model.

Munga,

Thanks for sorting the photo out.

Scott

[Axle]

Coat of paint, new cables and tyres.

Great fun to ride and I've come to the conclusion it is a Varsity after further research.

[silentbutdeadly]

That's quick schmick!

[meg.han.solo]

Hi everyone!

This is also my first post.

I recently bought a lovely green Ricardo off eBay, it's a fold up so it's little. 22" (I'll post photos and the stamp mark soon)
It's a bit rusty and needs a little love and attention but it's wonderful.

Problem is 'normal' bike pumps don't fit onto it's tire valve so I can't ride it because the tires are still flat.

It's sitting there, all pretty and green waiting for me to ride it and I can't because I have no idea which bike pump to buy!
Can anyone help please?

[Axle]

Problem is 'normal' bike pumps don't fit onto it's tire valve so I can't ride it because the tires are still flat.

It's sitting there, all pretty and green waiting for me to ride it and I can't because I have no idea which bike pump to buy!
Can anyone help please?

Hi,

Check out this link.
It sounds like you have a Presta valve if you're valves aren't "normal".
You can generally buy pumps with fittings for either valve or you could purchase an adapter and switch the Presta into a Schrader valve.

http://sheldonbrown.com/brandt/presta-schrader.html

Congrats on the Green Ricardo, nice to keep the history of South Australia Cycling alive for a while longer

Cheers

[meg.han.solo]

It sounds like you have a Presta valve if you're valves aren't "normal".
You can generally buy pumps with fittings for either valve or you could purchase an adapter and switch the Presta into a Schrader valve.

Hi Axle,

The valve looks like a Schrader valve though, but a smaller version of it.
The type that fits straight onto the bike pump - not the hose, if you get what I mean.

Looking at the other pages on that site it might even be a Woods valve. Does anyone know if that could be right?
It has what looks like a valve core on it... I'll go take some pictures tonight and post them here, to give everyone a better idea.

Glad to be part of this community, I can't wait to take my bike out!
It's got the original paint and everything, little bit rusty but I don't really mind that.

It's also got Sturmey Archer gears - 3 supposedly but I'm not so sure, it looks like 1 to me!
Anyway, I'll post some pictures late tonight/tomorrow so everyone can see and hopefully help me out, might be a bit of a resto project for me!

Cheers, Meg

[Dan]

Great fun to ride and I've come to the conclusion it is a Varsity after further research.

Looks like a Varsity I had briefly. Does it weigh 15 kilos?

[Evsie72]

My first bike was a Ricardo "LeTour" bought in 1987. Metallic gold/yellow and with a triple chainring an rear rack for panniers. What a great bike that was. Thanks for the great forum replies. It has brought back very fond memories indeed.

evsie

[frailer5]

Acquired this last weekend. Apart from stripping all reflectors off it, I haven't yet even cleaned it. (Slow-healing gashed index finger... alu printing plate corners are sharp )

Sample pic + gallery link for the rest, below. Will become my work commute ride.





Gallery pics

[Brownster]

If anyone is interested I have a Ricardo fully restored frame and forks for sale. Pm with email and I can send thru pictures.

Bike also has DURA ACE brakes, levers (brand new). Durace hubs laced rims as well... Will be splitting for sale as the DURACE brakes are the wrong size to suit
frame etc....

[Dan]

marketplace....

[Dan]

Acquired this last weekend. Apart from stripping all reflectors off it, I haven't yet even cleaned it. (Slow-healing gashed index finger... alu printing plate corners are sharp )

Sample pic + gallery link for the rest, below. Will become my work commute ride.

Slick looking Ricky

[frailer5]

Slick looking Ricky

Doesn't look to have done many kms., by the look of the BB. Most worn part is the bottle cage. Will be interesting, once cleaned up/checked, to see how it rides. I think Tange 900 was mid-to-low end, but at least double-butted. Doesn't feel too heavy.

[rebelcontender]

Theres a nice Ricardo White Lightning on Perth ebay right now.looks like it has the 600 group and all. hopefully someone from here gets it and enjoys it. if it where in Adelaide I would surely make a bid

Sent from my GT-I9100 using Tapatalk 2

[silentbutdeadly]

Slick looking Ricky

Doesn't look to have done many kms., by the look of the BB. Most worn part is the bottle cage. Will be interesting, once cleaned up/checked, to see how it rides. I think Tange 900 was mid-to-low end, but at least double-butted. Doesn't feel too heavy.

That's a sweet Elite. Not really low end more like their general sport model of the time - well equipped. Only a couple of more whizz bang versions above it (White Lightning and Pinnacle) that gave only small improvements. It'll make a great commuter.

[frailer5]

It'll make a great commuter.

Certainly hoping so...