steerer tube replacement?

[Torana68]

Hey ,
Anyone had a steerer tube replaced recently and can recommend a person, or does anyone have a stock of nos steerer tubes to sell (to suit 1950's) and ill do it myself
roger

[BLU_FZ!]

I did mine myself using a section of cr-mo 31.8mm MTB frame.The way i did mine was to cut the steering tube as close to the lugs (removing a center section) as possible allowing enough room to drill a hole and put a screw driver through to turn the tube while heating. Add heat,twist with an upward or downward motion to separate tube from the lug

[Torana68]

Id do it if someone had nos steerers for sale, but I think most of them are in a frame builders bottom draw so ill happily pay if i find someone

[BLU_FZ!]

http://www.henryjames.com/productlug.html#road

or Ceeway

Glenn