Repco Appreciation Society

User avatar
munga
Posts: 6987
Joined: Mon Jan 28, 2008 3:17 pm
Location: wowe
Contact:

Re: Repco Appreciation Society

Postby munga » Tue Apr 25, 2017 9:48 pm

in the meantime, what's the model, and what colour is it?

mitchj
Posts: 91
Joined: Tue Aug 05, 2014 3:46 pm
Location: Renmark
Contact:

Re: Repco Appreciation Society

Postby mitchj » Sat Apr 29, 2017 5:21 pm

A few posts ago, I put up some pics of a 1993 Repco "Cross Tracks XT 2", looking for some info on it. No luck there it seems, but I re-built it with some other bits, & here it is-
Image
Image
Image

I ended up using the 700c wheels, bars, shifter/brake units, seat & cranks/chain rings from a 2006 ladies Trek I had hanging up, & some Welgo alloy pedals off an old BMX. I replaced the cranks/chain rings because the centre chain ring was completely worn out, & one of the BB bearings had failed & completely ground out the axle, but I happened to have a correct length sealed BB that I used. Its got 35mm off road tyres, the 7 speed indexed shifting is really good, & it's really quiet & comfortable to ride. A quick 7km ride along the Ral Ral creek today was good, so tomorrow I'm riding it for my regular Sunday 30 km MTB ride with the gang, so we'll see how the old steely goes amongst all the flash alloy bikes!

savvysteve3
Posts: 1
Joined: Mon Jun 19, 2017 8:25 pm

Re: Repco Appreciation Society

Postby savvysteve3 » Mon Jun 19, 2017 9:06 pm

Hi I'm new to this Forum.

I have a Repco Olympic 14 that I've had since near new (late 80's I think) and it has been sitting in my garage untouched since 2005. (under cover so it is in good condition. Only small surface scratches and some oxidization). Before that I did a few (for me) serious rides of a bit under 100K but mostly just rode it locally for a lot less K's to keep fit. I'm in the process of carefully restoring it by taking it apart and carefully cleaning every part and re-assembling it. Although I have purchased and fitted different pedals I still have the original ones. The only thing I have replaced are the brake lever hoods and unfortunately I couldn't seem to get a match so I'm not really happy with the ones I've got (so any help on getting ones that are a legitimate replacement??)
Of course I have fitted new tyres / tubes and am attempting to fit new gear and brake cables as well as new handle bar tape.

I would have posted a photo of it at it's current state of restoration but I can't see anywhere where I can upload a photo, and it is looking very pretty!!

I'd like to get some advice on the brake lever hoods and "is there a correct way of installing the new cables?" I know there are plenty of tutorials about new cables / new handle bar tape installs, etc. but this is a geriatric model and it may be different, so I thought I'd ask before plunging in.

My background - I'm actually a reasonably keen mountain biker who goes MBing in the Blue Mountains and a few other places every Saturday with my 2 adult sons and brother-in-law and as we come from a BMX background (back to when it started - 1980) and we haven't attempted clip in pedals. We also don't just do fire trails or pretty flow tracks, we love "the rougher the better" while not being too silly about it. So I have'nt practiced with clip-in pedals so that might be fun.

AHWOOD
Posts: 4
Joined: Sun Oct 29, 2017 5:20 pm

Re: Repco Appreciation Society

Postby AHWOOD » Sun Oct 29, 2017 6:28 pm

Hey everyone, this is my Repco Vertex aluminum. I inherited the bike from my mother's uncle and don't know much about it.

So far I've put on new tires, bar tape and changed the gear and brake cables...

I'm wanting to get some more information on the bike if anyone knows anything that would be great. Is this thing worth anything?

https://dcvlbq.dm2301.livefilestore.com ... pmode=none

AHWOOD
Posts: 4
Joined: Sun Oct 29, 2017 5:20 pm

Few more images of my bike

Postby AHWOOD » Sun Oct 29, 2017 6:34 pm

Can anyone tell me more about this thing?

Image

Image

Image

Image

Image

Image

NASHIE
Posts: 443
Joined: Tue Jun 04, 2013 9:16 pm
Location: Perth, WA

Re: Few more images of my bike

Postby NASHIE » Sun Oct 29, 2017 7:46 pm

AHWOOD wrote:Can anyone tell me more about this thing?

Image

Image

Image

Image

Image

Image


Nice frame, don't think Repco made theses frames, just branded off as. They are Japans copy of the French Vitus frames. Google sr sakae litage should give you all the info you need.

koshari
Posts: 901
Joined: Mon Sep 09, 2013 5:33 pm

Re: Repco Appreciation Society

Postby koshari » Sun Oct 29, 2017 7:47 pm

picked up a hard rubbish traveller on the weekend, was going to leave it as i was out riding when i found it but given it was just missing a seat and post and had flat tires it was easy enough to steer home with one hand on the bars i was riding and another on the stem of the pickup, fortunately there was a southern star round the corner from our place which was happy to give up its seatpost and seat for the traveller.

she is no swan but hey who couldn’t do with another repco.....

Image
Image

koshari
Posts: 901
Joined: Mon Sep 09, 2013 5:33 pm

Re: Repco Appreciation Society

Postby koshari » Mon Oct 30, 2017 7:46 pm

Clydesdale Scot wrote:for future use so they are available after the ebay images are eventually removed.
Image
Image
Image
Image
Image

Nice effort scotty, pity now photobucket is no good for hosting.
Image

User avatar
Bunged Knee
Posts: 728
Joined: Fri Mar 27, 2015 12:29 pm
Location: Not drowning in Parramatta river yet

Re: Repco Appreciation Society

Postby Bunged Knee » Mon Oct 30, 2017 9:34 pm

koshari wrote:
Clydesdale Scot wrote:for future use so they are available after the ebay images are eventually removed.
Image
Image
Image
Image
Image

Nice effort scotty, pity now photobucket is no good for hosting.


It was posted on 26/8/16, just before photorustbucket demanded payment or blocked it.

Read it on how to fix it in Do NOT use Photobucket thread.
ID please? What ID? My seat tube ID is 27.2mm or 31.6mm depending on what bikes I ride today.thanks...

AHWOOD
Posts: 4
Joined: Sun Oct 29, 2017 5:20 pm

Re: Few more images of my bike

Postby AHWOOD » Tue Oct 31, 2017 3:15 pm

NASHIE wrote:
AHWOOD wrote:Can anyone tell me more about this thing?

Image

Image

Image

Image

Image

Image


Nice frame, don't think Repco made theses frames, just branded off as. They are Japans copy of the French Vitus frames. Google sr sakae litage should give you all the info you need.



Definitely looks that way, thanks for the information.

koshari
Posts: 901
Joined: Mon Sep 09, 2013 5:33 pm

Re: Repco Appreciation Society

Postby koshari » Wed Nov 01, 2017 7:40 pm

Bunged Knee wrote:
koshari wrote:
Clydesdale Scot wrote:for future use so they are available after the ebay images are eventually removed.
It was posted on 26/8/16, just before photorustbucket demanded payment or blocked it.

Read it on how to fix it in Do NOT use Photobucket thread.


good work BK :-)
Image

Who is online

Users browsing this forum: No registered users