The swap meet thread
- funnybike
- Posts: 178
- Joined: Tue Jun 12, 2012 9:04 pm
- Location: Brisbane
Re: The swap meet thread
Postby funnybike » Sat Jun 23, 2012 12:40 pm
Campy:
NR Rear Der - pat76
Victory Rear Der
NR Front Der - Braze
SR Front Der - Clamp
Athena Rear Der - Missing adjust ring from mounting bolt
Chorus 10 speed Crank set, 175mm, 53x39
8 speed Ergo shift cassette, 12-21
Shimano 105SC front hub, 36h, NOS
Shimano 600 (6400)Front Der, Braze, shop wear only.
Handle Bars:
Deda Speciale, 31.8, 42cm, Classic bend, shallow drop
Deda Newton, 31.8, 40cm, Classic bend, shallow drop
Deda Newton, 31.8, 44cm, Classic bend, deep drop, Clamp area has been polished for retro look.
Deda Newton, 31.8, 42cm, Classic bend, shallow drop
Deda 215, 26.0, 44cm, Classic bend, deep drop
Deda 215, 26.0, 42cm, Classic bend, shallow drop, Silver polished finished
Deda, 4Girls, 26.0, 36cm, Anatomical bend
Ritchey, Comp, Streem anatomical bend, 26.0, 44cm
Ritchey, WCS Logic II, Streem anatomical bend, 31.8, 44cm (wet look black)
Ritchey Biomax anatomical, 31.8, 44cm, (drops flare out to 46cm at the tips)
PedalSoft, Epic, Anatomical bend, 31.8, 42cm
Cinelli, Campione del Mondo, 26.4, 66-44cm, Shop wear
Cinelli, Criterium, 26.4, 65-44cm, NOS
Cinelli, Giro d'Italia, 26.4, 64-42cm, Used
Cinelli, Giro d'Italia, 26.4, 64-38cm, Used
-
- Posts: 364
- Joined: Sat Apr 28, 2012 2:36 pm
- Location: Maroochydore
Re: The swap meet thread
Postby servicimo » Tue Jun 26, 2012 2:08 pm
cheers!
Scott
- funnybike
- Posts: 178
- Joined: Tue Jun 12, 2012 9:04 pm
- Location: Brisbane
Re: The swap meet thread
Postby funnybike » Tue Jun 26, 2012 2:18 pm
It's an old 1988 model. Pre-indexing.
Will work great with some Simplex Retroshift levers and a 6 speed block though......
Probably should have mentioned that in the original post. oops.
-
- Posts: 364
- Joined: Sat Apr 28, 2012 2:36 pm
- Location: Maroochydore
Re: The swap meet thread
Postby servicimo » Tue Jun 26, 2012 2:38 pm
- vaeske
- Posts: 1013
- Joined: Thu May 05, 2011 9:22 am
- Location: Brisbane
- Contact:
Re: The swap meet thread
Postby vaeske » Thu Jun 28, 2012 10:37 am
Apollo Allegro Frame with cane creek headset and drop handlebars
Mavic ma2cd2 tubular rim 32H
Miche Competition Front wheel 36H
Suntour rear wheel laced to Mavic MA2 rim
Suntour Superbe front brake calliper - nutted
Suntour arx rear derailleur
Suntour Vx front derailleur – 28.8 clamp
Maillard Front Hub 36H – no skewer
Cinelli 1a stem 140mm - no clamp bolts or expander bolts
Diacompe brake levers and calipers set
Shimano 105 BL-1050 non aero brake levers
Shimano 105 DT Shifters
Shimano 105 HB-1050 F&R Hubs laced to Araya 700c rims 36H
Shimano 105 RD-1050 rear derailleur
Shimano 105 HB-5600 Black Front Hub laced to Alexrims race 18 white rim 32H
Shimano 105 Rear Hub 32H
Shimano 105 Golden Arrow DT shifters X2
Shimano 600 fd-6207 front derailleur (LF) X2 – clamp on
Shimano 600 rd-6207 rear derailleur
Shimano 600 Tri-colour BL-6403 aero brake levers
Shimano 600 6400 rear brake single pivot
Shimano SL-A500 7-8 speed shifter
Shimano RD A350 (MA) rear derailleur
Shimano A-351 Exxage aero brake levers
25.8mm seat post 300mm length X 2
26.6mm seat post 250mm length
Campagnolo
Xenon – F&R derailleur
Mirage – Dual pivot brake calipers - recessed
Record Road Hubs Front & Rear High Flange 36H
Shamal Road Hubs Front & Rear 16H
Record/Nuovo Record Front derailleur – clamp on.
Continental Gatorskin 700X25c tyre brand new in box
Looking for:
Wolber TX Profile clincher rim 32H X2
Velocity Aerohead black clincher rim 32H
Mavic Rear derailleur
Shimano 600 6207 front and rear hubs/wheelsets
Campagnolo triomphe brake levers
Campagnolo Record High Flange Track Hubs, 32H or 36H
Campagnolo Record/nuovo record brake caliper set
Campagnolo Super Record brake lever (retro one with drilled lever) - any condition.
Continental Force 700X23c/24c black rear tyre
Inner tubes 700X25/28c
- pentlandexile
- Posts: 473
- Joined: Sat Jan 02, 2010 9:48 am
- Location: Brisbane
Re: The swap meet thread
Postby pentlandexile » Thu Jun 28, 2012 6:25 pm
-
- Posts: 1878
- Joined: Sat Nov 08, 2008 10:46 am
- Location: Southeast Tasmania
Re: The swap meet thread
Postby LG » Thu Jun 28, 2012 9:41 pm
Are they a different size cone to the standard normandy hub found on all sorts of old french bikes?pentlandexile wrote:This may be a long shot - does anyone have a cone for a Normandy Luxe Competition 126mm rear hub?
- utedeej
- Posts: 757
- Joined: Wed Jan 11, 2012 3:56 pm
- Location: Near Canberra
Re: The swap meet thread
Postby utedeej » Thu Jun 28, 2012 9:47 pm
-
- Posts: 502
- Joined: Mon Jun 04, 2012 10:32 am
- Location: Canberra
- Contact:
Re: The swap meet thread
Postby ACT SC600 » Thu Jun 28, 2012 10:11 pm
Ultegra clamp on FD 4500 (34.9)
HG 7 sp cassette 12-21 teeth
Twist grip shifters (7 speed were fitted to tri bars)
Wanted (to finish wet weather pace bike)
DT shifters
Clamp on shimano FD circ is around 10cm around 28mm dia
long drop front and rear brake calipers (bolt on type) dual pivot if possible
And 26.4m seat post to suit new type seats
Cheers chris
- pentlandexile
- Posts: 473
- Joined: Sat Jan 02, 2010 9:48 am
- Location: Brisbane
Re: The swap meet thread
Postby pentlandexile » Fri Jun 29, 2012 3:09 pm
Not sure, I haven't seen a Normandy hub before this, although I knew they're a pretty common brand.LG wrote:Are they a different size cone to the standard normandy hub found on all sorts of old french bikes?pentlandexile wrote:This may be a long shot - does anyone have a cone for a Normandy Luxe Competition 126mm rear hub?
Here's a pic of the cone I need to replace, diameter at the widest point is 18mm. You can also see why I need to replace it. Rebuilt front hub is behind it.
cone by benatherton71, on Flickr
Do they look anything like that?utedeej wrote:I've probably got a couple of maillard ones lying around if that's any use. Off an Atom hub if i remember rightly.
Open to offers of a tiny trade if anyone can help, or I can just send cash or something..
- utedeej
- Posts: 757
- Joined: Wed Jan 11, 2012 3:56 pm
- Location: Near Canberra
- pentlandexile
- Posts: 473
- Joined: Sat Jan 02, 2010 9:48 am
- Location: Brisbane
Re: The swap meet thread
Postby pentlandexile » Sun Jul 01, 2012 12:14 pm
Thanks mateutedeej wrote:will check tomorrow.
- pentlandexile
- Posts: 473
- Joined: Sat Jan 02, 2010 9:48 am
- Location: Brisbane
Re: The swap meet thread
Postby pentlandexile » Sun Jul 01, 2012 4:03 pm
- utedeej
- Posts: 757
- Joined: Wed Jan 11, 2012 3:56 pm
- Location: Near Canberra
Re: The swap meet thread
Postby utedeej » Sun Jul 01, 2012 5:21 pm
Looks very similar to me. One is in great nic, while the other is quite pitted. I measure them at about 17mm though. They came off a rear atom hub that was destroyed. I've still got the full front hub on a rim, but likely won't use it. Did you want to pm me with an email address and i'll send you some pics.pentlandexile wrote:From Googling around it does look like Maillard/Atom/Normandy are pretty interchangeable.
utedeej
- pentlandexile
- Posts: 473
- Joined: Sat Jan 02, 2010 9:48 am
- Location: Brisbane
Re: The swap meet thread
Postby pentlandexile » Sun Jul 01, 2012 7:25 pm
-
- Posts: 1878
- Joined: Sat Nov 08, 2008 10:46 am
- Location: Southeast Tasmania
Re: The swap meet thread
Postby LG » Mon Jul 02, 2012 8:04 pm
- utedeej
- Posts: 757
- Joined: Wed Jan 11, 2012 3:56 pm
- Location: Near Canberra
Re: The swap meet thread
Postby utedeej » Tue Jul 03, 2012 1:14 pm
utedeej
- pentlandexile
- Posts: 473
- Joined: Sat Jan 02, 2010 9:48 am
- Location: Brisbane
Re: The swap meet thread
Postby pentlandexile » Tue Jul 03, 2012 7:21 pm
Yeah, fingers crossed: thanks for the offer LG. They're nice hubs these so it will be good to get them rolling again.utedeej wrote:Popped it in the post today pentlandexile. Fingers crossed that she's the one.
utedeej
-
- Posts: 1878
- Joined: Sat Nov 08, 2008 10:46 am
- Location: Southeast Tasmania
Re: The swap meet thread
Postby LG » Wed Jul 04, 2012 5:56 pm
Anybody have spare stronglight 99 chainrings (86 BCD), looking for around 50 & 36 tooth rings. Have a fairly wide range of stuff to swap.
Cheers.
-
- Posts: 630
- Joined: Sun Aug 05, 2007 7:29 am
Re: The swap meet thread
Postby silverlight » Wed Jul 04, 2012 7:23 pm
Give me a day or so and ill check out what i have as i have more rings than a jewelers shop
definitely have a heap of Stronglight.
SL
-
- Posts: 1878
- Joined: Sat Nov 08, 2008 10:46 am
- Location: Southeast Tasmania
Re: The swap meet thread
Postby LG » Wed Jul 04, 2012 7:54 pm
-
- Posts: 424
- Joined: Fri Jan 28, 2011 8:01 pm
- Location: Melbourne
Re: The swap meet thread
Postby rollin » Sun Jul 08, 2012 4:25 pm
Have a few bits for trade just lmk what your after..
- pentlandexile
- Posts: 473
- Joined: Sat Jan 02, 2010 9:48 am
- Location: Brisbane
Re: The swap meet thread
Postby pentlandexile » Wed Jul 11, 2012 9:43 am
Will trade for: The same, but for braze-ons.
Here's a pic
shifters by benatherton71, on Flickr
- utedeej
- Posts: 757
- Joined: Wed Jan 11, 2012 3:56 pm
- Location: Near Canberra
Re: The swap meet thread
Postby utedeej » Wed Jul 11, 2012 2:54 pm
- pentlandexile
- Posts: 473
- Joined: Sat Jan 02, 2010 9:48 am
- Location: Brisbane
Re: The swap meet thread
Postby pentlandexile » Wed Jul 11, 2012 3:31 pm
Tried that, I either don't get enough friction to hold it in gear or end up with the outer metal plate sticking out cos it's on top of the outboard side nylon washer, and it looks messy.utedeej wrote:I always thought that you could just pull clamp on shifters off the clamp and put them on the braze ons. Is that not right?
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
Who is online
Users browsing this forum: No registered users
- All times are UTC+10:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.