The swap meet thread

[funnybike]

Hi all

Here is an updated list of stuff I'm offloading.


*** Chrome hand pump, “Britania” made in England.

Shimano 600 RH Crank, 170mm. VGC
Shimano cantilever brake adjustment tools from the 80s
Shimano 105SC front hub, 36 hole. Unused with slight shop wear
Shimano STX 1 1/8 threaded cartridge headset
Shimano Altus shifters (stem mount)

Campagnolo Chorus 4 arm alloy 10 speed cranks, 53x39, 175mm. VGC
Campagnolo Chorus 5 arm alloy 10 speed cranks, 53x39, 175mm. VGC
Campagnolo Athena (1988) rear derailleur – missing anchor bolt.
Campagnolo (N.R.) front brake caliper, long bolt, nutted, no adj barrel or pads – GC
Campagnolo 8 speed cassette, 12-21
Campagnolo 8 speed cassette, 12-21
Campagnolo aero brake lever hoods. C Record era, black, new unused
Campagnolo aero brake lever hood 1 only. C Record era, black, used, GC
Campagnolo NR front derailleur, braze on
Campagnolo 9/10 speed cassette body to fit Formula (Velocity) hub. VGC


Suntour Accushift Plus Command Shifters, 6/7 speed, VGC
Formula cassette body for Formula (Velocity) hub, 9/10 speed Campagnolo
Vittoria Open Corsa Evo CX, pair, red, one is patched, but still life in them
Odyssey BMX headset, 1”, purple ano
Fuji kids road saddle, unused
Yellow bottle cage
2 BMX chainrings for 1 piece crank, 48 tooth, 1 x black, 1 x chrome
Diadora cleats for toe clips & straps – retro goodness!!
Road pedals, black, metal, basic, unused
Deda Aerobars, “Clip One”, VGC, pads unused
Deda Aerobars, “GCB” GC


Quill stem, PIVO, 105mm, 25.8
Quill stem, OS alloy, 1”, 26.0, 130mm

Threadless stems:
Deda Newton, 26.0, 140mm
Deda Zero, 26.0, 120mm
3T, The, 26.0, 120mm
3T, The, 31.8, 120mm
Pazzaz, 26.0, 110mm
Selcof, 31.8, 90mm
Fuji, riser, 26.0, 80mm
Ritchey, 26.0, 110mm
Ritchey, 26.0, 130mm
BBB, riser, 26.0, 90mm
No brand, 1”, 26.0, 130mm
No brand, 1”, 26.0, 80mm

[LG]

My old 50s Sydney-made Alcone road bicycle can't be ridden
After a long 85km jaunt a couple of weekends ago, one of it's old Mafac 'Racer' brake Eye-bolt assembly (holds the brake shoe to arm) sheared off. Been hunting around for a replacement but with not much luck. Either postage costs from US is ridiculous (Harris Cyclery) or seller on holiday (Bikeville.com).
The bike part is 456E.

Pretty sure I've got a spare brake calliper if you're still looking.

[Mustang]

Can you PM deails of this:
Campagnolo NR front derailleur, braze on

[LG]

Hi all
Im chasing some suntour downtube aero levers from 82-86 ish prefer clamp on.
I can trade 2 pet rabbits and a breville sandwich maker

I found a set of aero suntour levers in a draw today if you're still looking. Now are you willing to post your rabbits and are they fat enough to eat

[marc2131]

[quote="marc2131"]My old 50s Sydney-made Alcone road bicycle can't be ridden
After a long 85km jaunt a couple of weekends ago, one of it's old Mafac 'Racer' brake Eye-bolt assembly (holds the brake shoe to arm) sheared off. Been hunting around for a replacement but with not much luck. Either postage costs from US is ridiculous (Harris Cyclery) or seller on holiday (Bikeville.com).
The bike part is 456E.

Parts replaced and an old 60 year old bike ready to ride again. Thanks Mr Kelsen

[metalrideroz]

I am looking for a few things.

wanted
quality 80mm/26.0 stem
downtube friction shifters for braze on, suntour would be good
seat bolt mount rear centrepull hanger
26.4 seatpost
130mm bcd 42t, no teeth wear
6 speed 13/14-24/5 freewheel
3spd shifter, Shimano or SA

have to trade
Galli high flange track hubs, missing seals, non original axles
NOS Sante headset
NOS crank dust caps in chrome, pale metallic grey
NOS tange loose proof headset lock nut
NOS 600ex hub seals
CLB france levers
Modolo Corsa dilled levers
Miche lever x1
80s Mavic skewer
Raleigh seat bag
Zues adjuster side BB cup
650c track fork x3
hsinlung track bars 40cm
Kona project two straight leg rigid 90s mtb fork
26.0 sugino seatpost
bar knob thingos, one cover missing (80s version of product 138 here http://www.diacompe.co.jp/product/diacompe/index_5.html )

PM enquiries.

[funnybike]

Just an update. Nothing new, but a few items gone now.


Shimano cantilever brake adjustment tools from the 80s
Shimano STX 1 1/8 threaded cartridge headset
Shimano Altus shifters (stem mount)

Campagnolo (N.R.) front brake caliper, long bolt, nutted, no adj barrel or pads – GC
Campagnolo aero brake lever hoods. C Record era, black, new unused
Campagnolo aero brake lever hood 1 only. C Record era, black, used, GC

Suntour Accushift Plus Command Shifters, 6/7 speed, VGC
Vittoria Open Corsa Evo CX, pair, red, one is patched, but still life in them
2 BMX chainrings for 1 piece crank, 48 tooth, 1 x black, 1 x chrome
Diadora cleats for toe clips & straps – retro goodness!!
Deda Aerobars, “Clip One”, VGC, pads unused
Deda Aerobars, “GCB” GC

Quill stem, PIVO, 105mm, 25.8
Quill stem, OS alloy, 1”, 26.0, 130mm

Threadless stems:
Deda Newton, 26.0, 140mm
3T, The, 26.0, 120mm
Pazzaz, 26.0, 110mm
Ritchey, 26.0, 110mm
Ritchey, 26.0, 130mm
BBB, riser, 26.0, 90mm
No brand, 1”, 26.0, 130mm
No brand, 1”, 26.0, 80mm

[Slow6]

Shimano cantilever brake adjustment tools from the 80s

I'm curious to know more about these.. any photos?

[munga]

with the cx revolution, i'd be keeping them!

[frog]

I'm after any EOI's on my Keith Davis - Pegasus frame. I bought it a few years ago, paid too much, and never got around to building it up .
ST is 56cm C-T, 11786 stamped into the BB, heart shaped cutouts on the lugs, Campy drops, Reynolds 531competition tubing. It came with a stronglight headset. Paint is over all okay, a couple of scratches as you'd expect, no dints. I'm willing to post interstate ~$30.

I would love to keep it, I love the green and gold colour scheme, the early 531c decals, the elegant Pegasus decals etc. I always wanted to find a set of gold box section wheels to build it up with. It's not exactly a fire sale, just that I'm open to any offers. I'll update this thread with some more pictures.


Frame/fork/headset only

is mid $2XX Neg in the ballpark?

Thanks,
Chris.

[LG]

Currently looking for a 32 hole steel 27" rim. My search for a dunlop special lightweight rim has thus far been unsuccessful, so will consider anything...

[frog]

Here's an album with more pictures of the pegasus frame:
http://imageshack.us/g/1/9822222/

[Dan]

tempting, but you'd have to throw in a half dozen eggs too

[TedDancin]

I've got a few things leftover from recent builds if anyone's keen, can send photos

Nisi Toro Corsa non-clincher rim, 27", 16mm inner width, on Maillard hub
Unknown clincher rim (anyone help identify?), 700c, 13mm inner width on Maillard 700 Professional hub
Araya 27x1 1/4 Alloy rim on Suzue hub, with Suntour? 6 speed freewheel, no axle
Trans-X clamp on TT bars
Shimano 600 Arabesque rear derailleur, missing jockey wheels and back plate
Shimano Skylark rear derailleur, missing one jockey wheel
Shimano Golden Arrow front derailleur
Shimano Tourney centrepull rear brake (NOS)


I'm looking for

Shimano 600 Arabesque left side crank 165mm
Sugino super maxy left side crank 170mm
Shimano Tourney centrepull front brake
Generic Shimano downtube friction shifters


Here's the unknown rim, no markings on it, has a sticker which has almost completely worn off. I've trawled VeloBase and a few other places but can't find any logo's that look like this, the last letter is probably a C? Did Mavic ever do a logo like this?

[munga]

I'm after any EOI's on my Keith Davis - Pegasus frame. I bought it a few years ago, paid too much, and never got around to building it up .
ST is 56cm C-T, 11786 stamped into the BB, heart shaped cutouts on the lugs, Campy drops, Reynolds 531competition tubing. It came with a stronglight headset. Paint is over all okay, a couple of scratches as you'd expect, no dints. I'm willing to post interstate ~$30.

I would love to keep it, I love the green and gold colour scheme, the early 531c decals, the elegant Pegasus decals etc. I always wanted to find a set of gold box section wheels to build it up with. It's not exactly a fire sale, just that I'm open to any offers. I'll update this thread with some more pictures.


Frame/fork/headset only

is mid $2XX Neg in the ballpark?

Thanks,
Chris.

looking for anything to (part) trade for?

[vaeske]

Updated list of what i've got for trade

Continental Gatorskin 700X25c tyre brand new in box
Mavic Reflex SUP clincher rim 32H - gold anodised
Mavic ma2cd2 Tubular Rim 32H
Avocet RS Saddle very similar to Selle Italia Turbo

Shimano SL-6401 Downtube shifters (right only, silver) 8 speed
Shimano 600 fd-6207 front derailleur 26.8mm clamp
Shimano 600 rd-6208 rear derailleur - capable of index shifting

Carnac Impact Cycling Shoes size 39
vintage look pedals used (red)

25.6mm seat post 250mm length
25.8mm seat post 300mm length
30.0mm seat post 250mm length - silver with attachment

Belleri Criterium Drop Bars 26.0 - without grooves
Cinelli Touch Drop Bars 26.0 - with grooves for cabling
Modolo Brevatto Bars with 110mm Kalloy Stem

Maillard Low Flange Front Hub 36H – with Maillard skewer
Gipiemme Sprint Low Flange Front Hub 32H - no skewer
Shimano MTB Front and Rear Hubs 32H - no skewer (with mtb disc brake adaptor)

Campagnolo Mirage Single Pivot Brakes Set X2
Campagnolo Xenon Front and Rear 9 speed derailleurs, 32 clamp size
Campagnolo 170m Chainset

Looking for:

Wolber TX Profile clincher rim 32H X2
Campagnolo Super Record brake lever (retro one with drilled lever) - more scratches the better!
Continental GP4000 700X23c tyre
1995 Mavic Cosmic front hub covers
Campagnolo 8 speed ergo shifter hoods
campagnolo khamsin/scirocco 10 speed wheelset
shimano spd cleats & pedals

[Velo13]

Looking for:

Campagnolo 8 speed ergo shifter hoods
s

Hey Vaeske, I found those Sachs Hoods for early Ergopower. Not in great shape at all, but useable. Might get you rolling.

Shall I bring them along on Raterday?

[Velo13]

Looking for:

Campagnolo 8 speed ergo shifter hoods

Hey Vaeske, I found those Sachs Hoods for early Ergopower. Not in great shape at all, but useable. Might get you rolling.

Merde! Just cracked one right through on the extraction. I'll bring them anyway ....

[vaeske]

thanks brosef! See you raturday at 6am sharp! Looking forward to putting a face to the name!

[devilishdesigner]

Wanted:
60's or so frame with derrailer style rear dropouts - large size (I'm 6'2") with original pinstriping/paint. Don't care about brand and happy for it to have plenty of patina/scratches/chips/fading as long as it is straight. Happy with frame and forks only (usable BB would be a bonus) as I am planning on speccing it up with recent components for a chuckle in next year's around-the-bay-in-a-day

Offering:
I've got a reasonable range of 50's/60's frames, mens and womens, mostly with original patina'd paint and mostly from the lower end of the market (pressed horizontal rear dropouts and bolt on upper rear triangle on most) as well as period parts such as westwood wheels

[austy37]

Clamont 1000 frame a forks, triple butted chromoly, in ok shape, see pics size 56 top tube c to c and 57cm st (from the top of the seat tube to centre of the bottom bracket). Has mounts for racks, English bb.
Frame is too big for me, I am after 54cm frames, wheels, components whatever

[austy37]

Second swap is a larger size shogun samurai,

Double butted chromoly. Comes with forks. In fair condition again. Size is 57 top tube c to c and st 62 cm (from top of seat tube to centre of the bb) if these measurements seem crazy I can re measure anything. Again this frame is too big for me, after something in a 54cm sq, or components or wheels, whatever I am open to anything.
P.s frame is Canberra

[LG]

I have picked up a set of stronglight 49D cranks, unfortunately the right is 170 and left is 165. Thought I'd post on the off chance somebody has cranks the opposite lengths and would like to trade.

[frog]

looking for anything to (part) trade for?

Hi Munga, just saw this.
I would trade the Keith Davis Pegasus frame for a Reynolds tubed Peugeot road frame (none of this 501 stuff though) with cash adjustment either way depending on condition.
Cheers,
Chris

[Discodan]

Hi All

My Malvern Star Equipe frame with cracked chain stay is going free to a good home, I'd rather someone get some value out of repairing it rather than leaving it out for the rubbish. It's repairable and is a great little Renolds 531 frame with new headset and bottom bracket, sizing is about 58cm (link to photo of original bike https://sites.google.com/a/dbs72.com/ho ... edirects=0 )

I'll also be moving on the running gear which will be surplus to the new build if someone wants to make me an offer:
6 speed 105 groupset inc biopace rings
105 brakes and levers, new white hoods
700c Weinmann wheels with 105 hubs (the Belgian ones before they moved to Asia)

Northern Beaches, Sydney