The swap meet thread

[funnybike]

A few more bits:

Campy:
NR Rear Der - pat76
Victory Rear Der
NR Front Der - Braze
SR Front Der - Clamp
Athena Rear Der - Missing adjust ring from mounting bolt
Chorus 10 speed Crank set, 175mm, 53x39
8 speed Ergo shift cassette, 12-21

Shimano 105SC front hub, 36h, NOS
Shimano 600 (6400)Front Der, Braze, shop wear only.

Handle Bars:
Deda Speciale, 31.8, 42cm, Classic bend, shallow drop
Deda Newton, 31.8, 40cm, Classic bend, shallow drop
Deda Newton, 31.8, 44cm, Classic bend, deep drop, Clamp area has been polished for retro look.
Deda Newton, 31.8, 42cm, Classic bend, shallow drop
Deda 215, 26.0, 44cm, Classic bend, deep drop
Deda 215, 26.0, 42cm, Classic bend, shallow drop, Silver polished finished
Deda, 4Girls, 26.0, 36cm, Anatomical bend

Ritchey, Comp, Streem anatomical bend, 26.0, 44cm
Ritchey, WCS Logic II, Streem anatomical bend, 31.8, 44cm (wet look black)
Ritchey Biomax anatomical, 31.8, 44cm, (drops flare out to 46cm at the tips)

PedalSoft, Epic, Anatomical bend, 31.8, 42cm

Cinelli, Campione del Mondo, 26.4, 66-44cm, Shop wear
Cinelli, Criterium, 26.4, 65-44cm, NOS
Cinelli, Giro d'Italia, 26.4, 64-42cm, Used
Cinelli, Giro d'Italia, 26.4, 64-38cm, Used

[servicimo]

Hi Funnybike, can you tell me if the athena rd is 8 speed?

cheers!

Scott

[funnybike]

Sorry Servicimo

It's an old 1988 model. Pre-indexing.
Will work great with some Simplex Retroshift levers and a 6 speed block though......

Probably should have mentioned that in the original post. oops.

[servicimo]

All good! thanks for letting me know

[vaeske]

To Trade:

Apollo Allegro Frame with cane creek headset and drop handlebars
Mavic ma2cd2 tubular rim 32H
Miche Competition Front wheel 36H
Suntour rear wheel laced to Mavic MA2 rim
Suntour Superbe front brake calliper - nutted
Suntour arx rear derailleur
Suntour Vx front derailleur – 28.8 clamp

Maillard Front Hub 36H – no skewer
Cinelli 1a stem 140mm - no clamp bolts or expander bolts
Diacompe brake levers and calipers set

Shimano 105 BL-1050 non aero brake levers
Shimano 105 DT Shifters
Shimano 105 HB-1050 F&R Hubs laced to Araya 700c rims 36H
Shimano 105 RD-1050 rear derailleur

Shimano 105 HB-5600 Black Front Hub laced to Alexrims race 18 white rim 32H
Shimano 105 Rear Hub 32H
Shimano 105 Golden Arrow DT shifters X2

Shimano 600 fd-6207 front derailleur (LF) X2 – clamp on
Shimano 600 rd-6207 rear derailleur

Shimano 600 Tri-colour BL-6403 aero brake levers
Shimano 600 6400 rear brake single pivot

Shimano SL-A500 7-8 speed shifter
Shimano RD A350 (MA) rear derailleur
Shimano A-351 Exxage aero brake levers

25.8mm seat post 300mm length X 2
26.6mm seat post 250mm length

Campagnolo
Xenon – F&R derailleur
Mirage – Dual pivot brake calipers - recessed
Record Road Hubs Front & Rear High Flange 36H
Shamal Road Hubs Front & Rear 16H
Record/Nuovo Record Front derailleur – clamp on.

Continental Gatorskin 700X25c tyre brand new in box

Looking for:

Wolber TX Profile clincher rim 32H X2
Velocity Aerohead black clincher rim 32H
Mavic Rear derailleur
Shimano 600 6207 front and rear hubs/wheelsets
Campagnolo triomphe brake levers
Campagnolo Record High Flange Track Hubs, 32H or 36H
Campagnolo Record/nuovo record brake caliper set
Campagnolo Super Record brake lever (retro one with drilled lever) - any condition.
Continental Force 700X23c/24c black rear tyre
Inner tubes 700X25/28c

[pentlandexile]

This may be a long shot - does anyone have a cone for a Normandy Luxe Competition 126mm rear hub?

[LG]

This may be a long shot - does anyone have a cone for a Normandy Luxe Competition 126mm rear hub?

Are they a different size cone to the standard normandy hub found on all sorts of old french bikes?

[utedeej]

I've probably got a couple of maillard ones lying around if that's any use. Off an Atom hub if i remember rightly.

[ACT SC600]

To trade - Shimano 105 super SLR F & R brake caliper
Ultegra clamp on FD 4500 (34.9)
HG 7 sp cassette 12-21 teeth
Twist grip shifters (7 speed were fitted to tri bars)

Wanted (to finish wet weather pace bike)
DT shifters
Clamp on shimano FD circ is around 10cm around 28mm dia
long drop front and rear brake calipers (bolt on type) dual pivot if possible
And 26.4m seat post to suit new type seats

Cheers chris

[pentlandexile]

This may be a long shot - does anyone have a cone for a Normandy Luxe Competition 126mm rear hub?

Are they a different size cone to the standard normandy hub found on all sorts of old french bikes?

Not sure, I haven't seen a Normandy hub before this, although I knew they're a pretty common brand.

Here's a pic of the cone I need to replace, diameter at the widest point is 18mm. You can also see why I need to replace it. Rebuilt front hub is behind it.


cone by benatherton71, on Flickr

I've probably got a couple of maillard ones lying around if that's any use. Off an Atom hub if i remember rightly.

Do they look anything like that?

Open to offers of a tiny trade if anyone can help, or I can just send cash or something..

[utedeej]

will check tomorrow.

[pentlandexile]

will check tomorrow.

Thanks mate

[pentlandexile]

From Googling around it does look like Maillard/Atom/Normandy are pretty interchangeable.

[utedeej]

From Googling around it does look like Maillard/Atom/Normandy are pretty interchangeable.

Looks very similar to me. One is in great nic, while the other is quite pitted. I measure them at about 17mm though. They came off a rear atom hub that was destroyed. I've still got the full front hub on a rim, but likely won't use it. Did you want to pm me with an email address and i'll send you some pics.

utedeej

[pentlandexile]

PM sent

[LG]

If things don't work out with utedeej, I have a spare cone, not perfect, but much better than the one in your pic!

[utedeej]

Popped it in the post today pentlandexile. Fingers crossed that she's the one.

utedeej

[pentlandexile]

Popped it in the post today pentlandexile. Fingers crossed that she's the one.

utedeej

Yeah, fingers crossed: thanks for the offer LG. They're nice hubs these so it will be good to get them rolling again.

[LG]

Thought I'd try here before I buy from Hillary Stone.

Anybody have spare stronglight 99 chainrings (86 BCD), looking for around 50 & 36 tooth rings. Have a fairly wide range of stuff to swap.

Cheers.

[silverlight]

I may be able to help you there LG,
Give me a day or so and ill check out what i have as i have more rings than a jewelers shop
definitely have a heap of Stronglight.

SL

[LG]

SL, much appreciated. I don't necessarily need NOS. I probably don't have anything you need , but can supply cash. Look forward to hearing from you. LG

[rollin]

I'm looking for 90s deore dx rear dérailleur and cranks in decent shape...
Have a few bits for trade just lmk what your after..

[pentlandexile]

To trade: Campag Record downtube shifters, band-on model. Very good condition. These are the ones without the cable guide ferrules. Levers are marked "Patent Campagnolo Vicenza Italy"

Will trade for: The same, but for braze-ons.

Here's a pic


shifters by benatherton71, on Flickr

[utedeej]

I always thought that you could just pull clamp on shifters off the clamp and put them on the braze ons. Is that not right?

[pentlandexile]

I always thought that you could just pull clamp on shifters off the clamp and put them on the braze ons. Is that not right?

Tried that, I either don't get enough friction to hold it in gear or end up with the outer metal plate sticking out cos it's on top of the outboard side nylon washer, and it looks messy.