A new folly...

User avatar
RonK
Posts: 11508
Joined: Mon Aug 24, 2009 2:08 pm
Location: If you need to know, ask me
Contact:

A new folly...

Postby RonK » Thu Jun 28, 2012 10:26 pm

Ok, despite building two touring bikes in the last couple of years, I feel an urge to build yet another bike. There is something about researching and sourcing components and bringing them all together that I find really engaging.

I've been thinking about vintage bikes for a while now - or modern retro bikes really, and have had my eye on the Tommasini Techno. But it's hard to find a seller for the Tommasini, and the price of a frame is fairly hefty, so the idea has been on the backburner.

But all this talk about the Noosa Eroica has piqued my interest once again, and I started looking around for used bikes or frames, which lead me to NOS components, which lead me to...NOS frames. Yes, they are out there - first I found a bunch of NOS mid-90's Pinarello Banesto team bikes, at what seemed reasonable prices. And then I found this...

Image
A NOS Chesini la biciprecision Serie 83. Yes, 30 years old but brand new, never built, immaculate, and after a winning bid, mine - all mine...

More pics here...
Cycle touring blog and tour journals: whispering wheels...

Minority
Posts: 309
Joined: Tue Aug 28, 2007 5:54 pm
Location: Perth

Re: A new folly...

Postby Minority » Thu Jun 28, 2012 10:59 pm

Now that looks really nice, just don't put deep carbon fibre wheels on it :lol:

User avatar
GaryF
Posts: 1201
Joined: Wed Dec 27, 2006 1:38 am
Location: Near Bundaberg, Queensland.

Re: A new folly...

Postby GaryF » Fri Jun 29, 2012 1:34 am

What a beautiful classic steel frame.

User avatar
ldrcycles
Posts: 9594
Joined: Thu Oct 28, 2010 3:19 pm
Location: Kin Kin, Queensland

Re: A new folly...

Postby ldrcycles » Fri Jun 29, 2012 9:15 am

Looks VERY nice, beautiful colour. Do you think you'll have it ready for the L'Eroica?
"I must be rather keen on cycling"- Sir Hubert Opperman.

Road Record Association of Australia

User avatar
RonK
Posts: 11508
Joined: Mon Aug 24, 2009 2:08 pm
Location: If you need to know, ask me
Contact:

A new folly...

Postby RonK » Fri Jun 29, 2012 9:43 am

ldrcycles wrote:Looks VERY nice, beautiful colour. Do you think you'll have it ready for the L'Eroica?
Probably not this year - had I chosen the Banesto team Pinarello I would have built it up with readily available modern components.
This one I want to build with classic components, which will be much harder to source.
Cycle touring blog and tour journals: whispering wheels...

User avatar
familyguy
Posts: 8364
Joined: Wed Apr 16, 2008 2:30 pm
Location: Willoughby, NSW

Re: A new folly...

Postby familyguy » Fri Jun 29, 2012 12:00 pm

Those MAX forks look really nice, especially fully chromed. Are you sure its 1983? Whats the rear spacing? Will the back take recessed nut brakes (I see the forks can)? Sourcing aero DT shifters will be the most fun thing!!

Jim

seddo
Posts: 391
Joined: Sun Feb 25, 2007 9:58 pm
Location: ACT

Re: A new folly...

Postby seddo » Fri Jun 29, 2012 9:05 pm

Very nice frame lovely pantos - those Pinarello Barnesto frames are they from a Spanish ebayer?
Image

User avatar
RonK
Posts: 11508
Joined: Mon Aug 24, 2009 2:08 pm
Location: If you need to know, ask me
Contact:

A new folly...

Postby RonK » Fri Jun 29, 2012 9:11 pm

seddo wrote:Very nice frame lovely pantos - those Pinarello Barnesto frames are they from a Spanish ebayer?
Yes, guess you found them? They are also very tempting. Build up with Campy Athena and Zonda, you would have a very nice bike for around $2500 - about the cost of a Tommasini Techno frame.
Cycle touring blog and tour journals: whispering wheels...

User avatar
grantw
Posts: 1792
Joined: Mon Nov 09, 2009 11:22 am
Location: Wollongong

Re: A new folly...

Postby grantw » Fri Jun 29, 2012 9:48 pm

That is sweet.
Image

User avatar
brasstinman
Posts: 398
Joined: Tue Jan 20, 2009 4:29 pm
Location: Sydney

Re: A new folly...

Postby brasstinman » Fri Jun 29, 2012 10:43 pm

Beautiful! Looking forwarding to following this build.

User avatar
RonK
Posts: 11508
Joined: Mon Aug 24, 2009 2:08 pm
Location: If you need to know, ask me
Contact:

Re: A new folly...

Postby RonK » Sat Jun 30, 2012 1:17 pm

Hmmmm, I may have struck gold - a follow up email to my seller reveals he has has a bunch of components, including almost complete Record, Super Record, and C Record gruppos, and a selection of rims mostly tubular) and hubs. Now, if I can negotiate an affordable price...
Cycle touring blog and tour journals: whispering wheels...

User avatar
Mustang
Posts: 1572
Joined: Tue Feb 02, 2010 9:20 am
Location: Little Mountain Qld
Contact:

Re: A new folly...

Postby Mustang » Sat Jun 30, 2012 8:28 pm

RonK wrote:Hmmmm, I may have struck gold - a follow up email to my seller reveals he has has a bunch of components, including almost complete Record, Super Record, and C Record gruppos, and a selection of rims mostly tubular) and hubs. Now, if I can negotiate an affordable price...
Dont worry if you can afford it!!!!!!!!!!! just a beautiful frame ....deserves it.....
Distance Goal 4000km
70 years young.

User avatar
ldrcycles
Posts: 9594
Joined: Thu Oct 28, 2010 3:19 pm
Location: Kin Kin, Queensland

Re: A new folly...

Postby ldrcycles » Sat Jun 30, 2012 11:20 pm

RonK wrote:Ok, despite building two touring bikes in the last couple of years, I feel an urge to build yet another bike.
Everytime i read this it makes me laugh out loud, by the middle of July i will have built 9 in 2 months :) . Glutton for punishment though haha.
"I must be rather keen on cycling"- Sir Hubert Opperman.

Road Record Association of Australia

User avatar
RonK
Posts: 11508
Joined: Mon Aug 24, 2009 2:08 pm
Location: If you need to know, ask me
Contact:

Re: A new folly...

Postby RonK » Sat Jun 30, 2012 11:43 pm

familyguy wrote:Those MAX forks look really nice, especially fully chromed. Are you sure its 1983? Whats the rear spacing? Will the back take recessed nut brakes (I see the forks can)? Sourcing aero DT shifters will be the most fun thing!!

Jim
Missed your post. No, I'm not sure it is 1983, but it's my understanding from some old Chesini brochures on their website that the 83 pantographed on the headtube means it is a Serie 83, built in 83. This could be a complete misunderstanding, but the sellers also believes it is an 1983 model. I'm not sure how late the aero lever mounts were in use.

I'm not sure about the rear brake mountings, the frame has not arrived from Switzerland yet, but I'll be surprised if it can't.

And the levers, well I'm not sure if these are quite the same period, but they will do for starters if they're not.

Image

I've posted a few more pictures of some of the components on offer in my web album.
Last edited by RonK on Sat Jun 30, 2012 11:57 pm, edited 1 time in total.
Cycle touring blog and tour journals: whispering wheels...

User avatar
RonK
Posts: 11508
Joined: Mon Aug 24, 2009 2:08 pm
Location: If you need to know, ask me
Contact:

Re: A new folly...

Postby RonK » Sat Jun 30, 2012 11:56 pm

ldrcycles wrote:
RonK wrote:Ok, despite building two touring bikes in the last couple of years, I feel an urge to build yet another bike.
Everytime i read this it makes me laugh out loud, by the middle of July i will have built 9 in 2 months :) . Glutton for punishment though haha.
Yours is an impressive output. I have expensive tastes (obviously), so my activities have been governed by the availablity of funds, the amount of room left in my city apartment, and the need to socialise my acquisitions gradually with my BH. :lol: :lol: :lol:
Cycle touring blog and tour journals: whispering wheels...

User avatar
frailer5
Posts: 978
Joined: Mon Dec 26, 2011 9:25 am
Location: Sydney

Re: A new folly...

Postby frailer5 » Sun Jul 01, 2012 9:38 am

RonK wrote:
ldrcycles wrote:
RonK wrote: and the need to socialise my acquisitions gradually with my BH. :lol: :lol: :lol:
Much more difficult than the mere building process, am sure. :lol: That frame is a beautiful start.
Well, no, it's not a pushbike, otherwise I'd be pushing it...
Ricardo Elite, '87 Keith Davis/Pegasus, '92 Team Miyata Ti.

User avatar
RonK
Posts: 11508
Joined: Mon Aug 24, 2009 2:08 pm
Location: If you need to know, ask me
Contact:

Re: A new folly...

Postby RonK » Mon Aug 06, 2012 5:11 pm

I have more identifying information - it's a Chesini Mod. 83 Cromovelato (transparent paint over chrome) Brevettato (internal cables). Still not sure what year it is or why it has 83 on the head tube badge instead of Precision, when it looks identical in all other respects. The short rear dropouts though lead me to think it might be later 80's rather than early. Should arrive any day now...
Cycle touring blog and tour journals: whispering wheels...

Uncle Just
Posts: 800
Joined: Wed Feb 03, 2010 4:54 pm

Re: A new folly...

Postby Uncle Just » Mon Aug 06, 2012 5:48 pm

Nice frame and colour Ron, who would have thought you with a steel frame. I'd believe a Teledyne! :lol: One thing about the Italians, they did chrome better than most.

Please give more technical stuff as I'm interested. Rear spacing? Italian BB presumably? I note the internal cable routing, I had that on a bike in the 80s and was handy when putting it on the bike rack as it didn't pinch the cable and looked clean. What are the angles and frame size? As for the gruppo I reckon go with late 80s Record if the budget allows and you can source it, simply beautiful. The spiders were superb, never bettered imo.

User avatar
RonK
Posts: 11508
Joined: Mon Aug 24, 2009 2:08 pm
Location: If you need to know, ask me
Contact:

Re: A new folly...

Postby RonK » Mon Aug 06, 2012 9:57 pm

Uncle Just wrote:Nice frame and colour Ron, who would have thought you with a steel frame.
Hehe, why not, I've owned plenty in the past. Actually I'm expecting the completed bike to be a very similar weight to my CF roadie. And this will be a show bike, one I wouldn't expect to ride regularly, so it doesn't matter much anyway.

I'm still trying to date this frame, and if its early eighties it should be built with Super Record ala the 1985 Chesini brochure. If it is late 80's then I guess C Record and Delta brakes will be the go. Either way is going to take time and money to source components.No hurry though, it was always intended to be a long term project.

Here is as much detail as I have at the moment. No angles but as you can see it's extremely compact and I expect they are typically Italian and quite steep.

Frameset features:
- Columbus SL tubing, beautiful aerodynamic fork crown
- internal cable routing for rear brake and front and rear derailleur
- aluminium dust cover for cable routing through the BB
- cut-out, pantographed (“CHESINI”) and fluted BB shell
- gold fluted Chesini pantographs on rear seat stays, brake stay and fork crown
- Chesini logo pantographed on steerer tube, fluted in gold and white
- Chesini drop-outs and aerodynamic braze-on holder for shifting levers with “C”-panto.

Dimensions:
- top tube 56 cm (c-c)
- seat tube 56 cm (c-c)
- rear hub spacing 126 mm
- seatpost 27.2 mm.

So far I've managed to acquire a Chesini pantographed stem, and I have located pantographed shift levers as well.
Cycle touring blog and tour journals: whispering wheels...

User avatar
spirito
Posts: 1393
Joined: Fri Nov 28, 2008 2:03 pm

Re: A new folly...

Postby spirito » Tue Aug 07, 2012 9:47 am

One word ... Chromovelato !!!! 8)

Very, very nice. Nice score. :wink:




Btw, they're not MAX forks. Internal lugged, sloping crown and certainly consistent with the era of 1983.
Cranky Jim wrote: God did not invent gears. Men invented gears ... because we are not gods.

User avatar
spirito
Posts: 1393
Joined: Fri Nov 28, 2008 2:03 pm

Re: A new folly...

Postby spirito » Tue Aug 07, 2012 11:00 am

Here's s pic of the Chesini factory around the time your frame was built. Maybe, perhaps, long shot ... but one of the frames hanging up could be ours !!! :mrgreen:

Image
Cranky Jim wrote: God did not invent gears. Men invented gears ... because we are not gods.

User avatar
munga
Posts: 7023
Joined: Mon Jan 28, 2008 3:17 pm
Location: wowe
Contact:

Re: A new folly...

Postby munga » Tue Aug 07, 2012 11:54 am

happy 1000th post, spirito.
id love a workshop like that!

User avatar
RonK
Posts: 11508
Joined: Mon Aug 24, 2009 2:08 pm
Location: If you need to know, ask me
Contact:

Re: A new folly...

Postby RonK » Tue Aug 07, 2012 12:53 pm

spirito wrote:Here's s pic of the Chesini factory around the time your frame was built. Maybe, perhaps, long shot ... but one of the frames hanging up could be ours !!! :mrgreen:
Yes, I have seen that pic during my research. It must have been a state-of-the-art factory back in the 80's, and would compare favourable against pics of modern factories I have seen.
There is another pic of an even older factory in one of the Chesini brochures I've found.

Can't see any blue cromovelato frames anywhere though...
Last edited by RonK on Tue Aug 07, 2012 4:07 pm, edited 1 time in total.
Cycle touring blog and tour journals: whispering wheels...

User avatar
RonK
Posts: 11508
Joined: Mon Aug 24, 2009 2:08 pm
Location: If you need to know, ask me
Contact:

Re: A new folly...

Postby RonK » Tue Aug 07, 2012 4:06 pm

spirito wrote:Btw, they're not MAX forks. Internal lugged, sloping crown and certainly consistent with the era of 1983.
Yes, I believe they are Air forks. According to Columbus, MAX was not introduced until 1987.
Cycle touring blog and tour journals: whispering wheels...

User avatar
spirito
Posts: 1393
Joined: Fri Nov 28, 2008 2:03 pm

Re: A new folly...

Postby spirito » Wed Aug 08, 2012 2:17 am

RonK wrote: Can't see any blue cromovelato frames anywhere though...
Prolly because Mario & Alfonso made it, took it out the back door and decided to sit on it for 30 or so years just to be sure they wouldn't get busted :wink: :lol:
Cranky Jim wrote: God did not invent gears. Men invented gears ... because we are not gods.

Who is online

Users browsing this forum: No registered users