Page 1 of 1
Daccordi parts ID
Posted: Fri Jan 11, 2013 2:08 pm
by Lots of steel bikes
Re: Daccordi parts ID
Posted: Fri Jan 11, 2013 2:26 pm
by familyguy
http://velobase.com/ViewComponent.aspx? ... 86e8d13c90" onclick="window.open(this.href);return false;
Velobase is your friend.
Jim
Re: Daccordi parts ID
Posted: Fri Jan 11, 2013 2:48 pm
by dubrat
Yup Stronglight Seatpost quiet rare
Were made to fit French Altec Frames like mine...
Re: Daccordi parts ID
Posted: Fri Jan 11, 2013 2:49 pm
by dubrat
and another
they are a quill type
Re: Daccordi parts ID
Posted: Fri Jan 11, 2013 4:12 pm
by morini
Stronglight cranks too? This is a really interesting D'accordi. I wonder if it's actually something else?
What's written on the rear drop outs and do you know anything about it's past?
Re: Daccordi parts ID
Posted: Fri Jan 11, 2013 8:50 pm
by TDC
RD looks like Triomphe
Re: Daccordi parts ID
Posted: Sat Jan 12, 2013 10:45 am
by Lots of steel bikes
morini wrote:Stronglight cranks too? This is a really interesting D'accordi. I wonder if it's actually something else?
What's written on the rear drop outs and do you know anything about it's past?
Daccordi stamped on drop outs. Know nothing of it's past other than it has had a very hard life. The cable guides have been ground off! Here's a pic of the decals.
Re: Daccordi parts ID
Posted: Sat Jan 12, 2013 11:40 am
by Lots of steel bikes
Thanks Jim. I can't find reference for the crankset but will keep looking. The drive side crank has a F7 stamp and the left has a L5 stamp. Noticed that the rear wheel hub is Pelissier. Quite a strong French influence.
Re: Daccordi parts ID
Posted: Mon Jul 30, 2018 7:31 pm
by AerospacePro
Sorry if this is rehashing an old post, but I just bought a virtually identical Daccordi in marginally better shape and I’m looking for information on it. Why was the Reynolds 501 sticker on the Daccordi frame? I removed mine hoping to find a Columbus SL tag underneath but there was nothing. Any info would be great.
Re: Daccordi parts ID
Posted: Mon Jul 30, 2018 10:12 pm
by P!N20
AerospacePro wrote:Why was the Reynolds 501 sticker on the Daccordi frame?
I’m going out on a limb, but maybe it’s built with Reynolds 501 tubes?