yet more Id help

Torana68
Posts: 1297
Joined: Sat Nov 11, 2006 11:40 am
Location: NSW/ACT
Contact:

yet more Id help

Postby Torana68 » Sat Sep 14, 2013 6:46 pm

Picked this up , have not much lot of idea who made it (its a bit new for me) Bocama lugs and chunky seat stays might help someone?

Image
Image
Image

dayne
Posts: 651
Joined: Fri Dec 10, 2010 1:51 pm

Re: yet more Id help

Postby dayne » Sat Sep 14, 2013 7:44 pm

Any serial numbers or bb cut outs?

Torana68
Posts: 1297
Joined: Sat Nov 11, 2006 11:40 am
Location: NSW/ACT
Contact:

Re: yet more Id help

Postby Torana68 » Sat Sep 14, 2013 8:06 pm

no BB cut out, no numbers found yet, have to get the stem out and check the steerer.
Ozpushies! for ALL Australian made bikes.
"It's only original once"

Torana68
Posts: 1297
Joined: Sat Nov 11, 2006 11:40 am
Location: NSW/ACT
Contact:

Re: yet more Id help - Superia?

Postby Torana68 » Sat Jan 18, 2014 9:54 pm

After looking everywhere this may be a Superia from Belgium, any Superia experts about? most seem to be Ishiwata tubing, any way to id this tubing?

http://progettopistavintage.blogspot.com.au/2013/05/superia-track.html
Ozpushies! for ALL Australian made bikes.
"It's only original once"

User avatar
cotterpin
Posts: 1075
Joined: Wed Mar 21, 2012 10:28 am
Location: St.Leonards VIC

Re: yet more Id help

Postby cotterpin » Sun Jan 19, 2014 3:31 am

Do I see the remains of a riders name along the top bar?

The inside dimples on the chain stay can be a good indicator or their maker, i.e. Reynolds, Columbus and Vitus, all had very
distinctive shapes.
From memory in the early 80's the Ishiwata and Tange Stays that landed in the eastern states of Oz, had no dimples at
all, leaving it for the builder to punch in.
Fork blades can narrow it down as well. In the early 80's, Reynolds and Vitus were only available in 22.2mm dia.
Tange 23.0mm, Columbus and Ishiwata 24.0mm, or at least that's how I remember it.
I think Reynolds were the first 5/8" dia seat stays to hit Oz.
What ever the tubing is, it looks like a very good frame. I suspect the builder kept a very high standard and didn't take
short cuts e.g. if you look closely at the c/stay ends (drop outs) you might be able to see how the the end and the stay
are double slotted, sort of like a finger joint.

Peter
a man hears what he wants to hear and disregards the rest

Torana68
Posts: 1297
Joined: Sat Nov 11, 2006 11:40 am
Location: NSW/ACT
Contact:

Re: yet more Id help

Postby Torana68 » Sun Jan 19, 2014 9:03 am

cotterpin wrote:Do I see the remains of a riders name along the top bar?
Peter


yeah how did i forget to mention that, M. McCarthy, forks 22/13 ish seat stays 16 /11, seat stem 27.2 ,chainstay dimples dont look identical, the colour is close to the Superia blue, doesnt mean a lot though.
Roger
Ozpushies! for ALL Australian made bikes.
"It's only original once"

Torana68
Posts: 1297
Joined: Sat Nov 11, 2006 11:40 am
Location: NSW/ACT
Contact:

Re: yet more Id help

Postby Torana68 » Mon Jul 27, 2015 6:30 pm

thought Id bump this one back up......
Ozpushies! for ALL Australian made bikes.
"It's only original once"

Who is online

Users browsing this forum: bychosis