New decal manufacture

speedster356
Posts: 18
Joined: Sun Jun 04, 2017 3:04 pm

New decal manufacture

Postby speedster356 » Wed Oct 04, 2017 2:50 pm

Anyone have the skills to manufacture good quality decals from an image only? I can get higher quality images.
The images here are not of my bike but the same model.
Imagecomet1 by peter mcleod, on Flickr
Imagecomet2 by peter mcleod, on Flickr
Imagecomet3 by peter mcleod, on Flickr

User avatar
marc2131
Posts: 441
Joined: Fri May 27, 2011 9:20 pm
Location: Inner West, Sydney

Re: New decal manufacture

Postby marc2131 » Wed Oct 04, 2017 3:20 pm

It is a rather labourious process to draw it out, but it can be done with the right computer program like Adobe Illustrator.
An image (on your seat tube, for example) will take a good 3 hours or more.
The next big problem is matching the colour properly. That is much more difficult. You can't match colours straight from a computer or smart phone screen. It will defer from computer monitor to monitor. By the time you print it out, the propensity for a huge difference is rather large. You will need to get hold of a 'Pantone' colour swatch book. Graphic designers use them. They find the closest match to the colour they can find comparing it to the various colour swatches in this book (there will be hundreds, sometimes a few thousand). Each colour will have a designated identifier or Pantone number. This number can be typed into Adobe Illustrator which will ensure the colour is reproduced accurately when printed.
... 15km short of a cardiac arrest ...
Jim Bundy, Alcon, Raleigh, Rossin, Malvern Star, Bickerton and Moulton

10speedsemiracer
Posts: 103
Joined: Sat Feb 11, 2017 7:38 pm
Location: Melbourne, Eastern Suburbs, near the hills,

Re: New decal manufacture

Postby 10speedsemiracer » Wed Oct 04, 2017 3:46 pm

Maybe contact Cyclomondo,

http://cyclomondo.net/page47.htm
mmm, BioPace

speedster356
Posts: 18
Joined: Sun Jun 04, 2017 3:04 pm

Re: New decal manufacture

Postby speedster356 » Wed Oct 04, 2017 3:53 pm

marc2131, thanks, I think I might have access to a designer.
10speedsemiracer, have just sent off an email.
There's also https://h-lloyd-cycles.myshopify.com/
I got some Jarques Anquatil decals from them and were very good quality.

speedster356
Posts: 18
Joined: Sun Jun 04, 2017 3:04 pm

Re: New decal manufacture

Postby speedster356 » Wed Oct 04, 2017 4:13 pm

Greg (cyclomondo) has responded already!

10speedsemiracer
Posts: 103
Joined: Sat Feb 11, 2017 7:38 pm
Location: Melbourne, Eastern Suburbs, near the hills,

Re: New decal manufacture

Postby 10speedsemiracer » Wed Oct 04, 2017 4:46 pm

speedster356 wrote:Greg (cyclomondo) has responded already!


He's extremely good. Have used before.
mmm, BioPace

User avatar
Clydesdale Scot
Posts: 1836
Joined: Tue Mar 03, 2009 12:55 pm
Location: Adelaide, SA

Re: New decal manufacture

Postby Clydesdale Scot » Wed Oct 04, 2017 6:49 pm

Have a look at this page
http://www.lixbmx.com/tips-for-tracing-survivor-decals

If you have access to the original, a tracing such as this would assist.
If Greg is able to help you, go with him.
There are others, but Greg is world class.
let me help you prepare your ebay advert, ask me how

LG
Posts: 1571
Joined: Sat Nov 08, 2008 10:46 am
Location: Southeast Tasmania

Re: New decal manufacture

Postby LG » Wed Oct 04, 2017 6:57 pm

That is one stunning bike as it is!
LG = Low Gear

User avatar
marc2131
Posts: 441
Joined: Fri May 27, 2011 9:20 pm
Location: Inner West, Sydney

Re: New decal manufacture

Postby marc2131 » Thu Oct 05, 2017 8:53 am

I don't believe Greg/Cyclomondo can retrace or redraw stuff. Correct me if I am wrong Greg.
... 15km short of a cardiac arrest ...
Jim Bundy, Alcon, Raleigh, Rossin, Malvern Star, Bickerton and Moulton

User avatar
Clydesdale Scot
Posts: 1836
Joined: Tue Mar 03, 2009 12:55 pm
Location: Adelaide, SA

Re: New decal manufacture

Postby Clydesdale Scot » Thu Oct 05, 2017 9:12 am

I am sure Greg can expertly do that, and would be one of the best.
But the time taken would be difficult to be cost effective for low demand brands.
The page I linked to would assist in the generation of the artwork.
Greg has printed artwork I have generated, as has Velocals in the US and H.Lloyds in England.
Velocals as Greg was busy, H.Lloyds as they had already a form of the artwork generated by a customer that needed about 30 changes I sought to better match the original. I made the changes in Illustrator and emailed the file back.
I got what I wanted and there is now a better decal for the next customer.
Without a magnifying glass, you wouldn't see the difference. But I wouldn't have been satisfied.

Talk to Greg and see what is best. If you know someone who is competent in vector artwork it could help.
let me help you prepare your ebay advert, ask me how

speedster356
Posts: 18
Joined: Sun Jun 04, 2017 3:04 pm

Re: New decal manufacture

Postby speedster356 » Thu Oct 05, 2017 12:47 pm

LG wrote:That is one stunning bike as it is!
Yes it is, that's not mine. Mine is the house paint version, but still full of nice goodies and asking to come back to life.

Who is online

Users browsing this forum: No registered users