FOUND: Campganolo rear hub (for parts).

[Verbs & Nouns]

Excatly what it says in the title.

Not fazed what condition the hub is in, I only need a few things from it.

Axle must be 10mm x 26tpi.

Posted to or located in Adelaide.

[rogerrabbit]

what frame spacing do you need it for? Solid or for a Quick Release?

Cheers
Roger

[Verbs & Nouns]

Solid, for a rear track hub.

AllI really need is the locknut that goes up against the washer that goes up againts bearing cone, in between the frame and the hub, circled in red below.



Surely some hardware store would be able to help me with this...?

[MichaelB]

Try places like Coventry Fasteners or Ajax.

They may be able to assist

[rustychisel]

http://cgi.ebay.com.au/Campagnolo-C-rec ... 240%3A1318


you know you want to

[Verbs & Nouns]

http://cgi.ebay.com.au/Campagnolo-C-record-hubset-32h-130mm-rear_W0QQitemZ320341402878QQcmdZViewItemQQptZAU_Sport_Cycling_Parts?hash=item320341402878&_trksid=p3286.c0.m14&_trkparms=66%3A2|65%3A1|39%3A1|240%3A1318


you know you want to

$100 for one nut...? Not bloody likely.

I think Andy Fyxomatosis is on the case for me...

[rustychisel]

Lance paid more... oh, nevermind.

have a good weekend

[rogerrabbit]

Be careful that you dont get road locknuts, they are thicker and wont work (experience speaking here)

I am also in need of some track locknuts for a campag rear hub, so if you find a commercial source, pls post it here.

Cheers
Roger

[kukamunga]

Hmmm.....

[Verbs & Nouns]

And Fyxomatosis came to the rescue with the locknut, cone and washer!