[BNE] WTB/WTT - Stems

[lethoso]

Ahoy!

I have acquired a couple of bikes lately, but the stems are either too long, or too short for me. Interested in stems to fit a standard 1" steerer.

So I need a cinelli stem (unless anyone else made stems with a 26.4mm clamp?) of about 100/110mm length. I can offer a 140mm cinelli 1A, or a 70(?)mm cinelli 1A, both in reasonable but used condition as a trade, or let me know how much cash you're chasing.

I also need a 80-90ish mm long, 26.0mm clamp stem. I have a nice 135mm 3TTT motus that I'd trade for similar, or I can offer cash.

In addition to the stems, I also have a shitload of bartape lying around, as well as a bunch of nice velox rim tape that I'd be happy to trade. I've also got a bunch of new, unused mudguards (to suit 700c, 26" and 24(?)") and a couple of nice unused 26" velocity rims, though the latter two would be local trades only.

[lethoso]

bump.

still looking for a cinelli stem

[kukamunga]

Which part of this far, wide country do you reside in, lethoso ?

Maybe you could trade stems with this ebay seller (or is that you?)

[lethoso]

oh sweet, cheers for the link

[kukamunga]

And if you tell us where you are located (put it in your 'Profile' under 'User Control Panel'), we may be able to help you some more.....

I have access to some old Cinelli stems.....

[JustinS007]

So I need a cinelli stem (unless anyone else made stems with a 26.4mm clamp?) of about 100/110mm length.

Hi lethoso,

Not an expert with stuff so no idea if this is what you need, but I do have (obvioudly not cinelli):
- 100mm (centre to centre) Giant stem from a 2009 Defy 2. It was too long for me so I changed it to a 70mm one.
- Forks hole measures 28 - 29mm.
- Handlebars hole measures 26mm and is connected with four bolts.
- Not sure of the raise angle but looks about 8 degrees I guess?
- Weight is 148 grams. Aluminium I assume.
- Hardly used, fitted could pass for new.
- No good to me so I'd swap for a couple of sets of handlebar tape.

[lethoso]

And if you tell us where you are located (put it in your 'Profile' under 'User Control Panel'), we may be able to help you some more.....

I have access to some old Cinelli stems.....

sorry, I thought the [bne] in the thread title was sufficient.... do elaborate on your stems though

So I need a cinelli stem (unless anyone else made stems with a 26.4mm clamp?) of about 100/110mm length.

Hi lethoso,

cheers for the offer but a newer giant will have a stem to suit a threadless headset, which isn't what I'm looking for. Thanks anyway.

[kukamunga]

Ahh.... so BNE means Brisbane.... who woulda thought.....?

Pity you're not in Melb. When I get a chance, I'll have a scrounge around.....

[brentono]

Hi Lethoso,
Have 2x CINELLI XA ROAD STEMS, silver 10.5 and black 10.0
Both in good condition, would look at $40ono a piece.
I am in Perth, so there would be postage and handling,
so maybe it's better you go local.
Let me know your thoughts, can email or SMS photos.
Cheers
BrentonO

[brentono]

Sorry to misguide,
CINELLI XA STEMS could be used for road or track
Here's the photos

[lethoso]

ah, I'd kinda forgotten about this one. I've got the bike mostly assembled... with a long stem on there (probably too long). I'll probably try and get it running this week, and give it a test in its current setup and get back to you. Cheers for the photos