Members classifieds for selling bicycles / parts. PRIVATE OFFERS ONLY
11 posts • Page 1 of 1
I have acquired a couple of bikes lately, but the stems are either too long, or too short for me. Interested in stems to fit a standard 1" steerer.
So I need a cinelli stem (unless anyone else made stems with a 26.4mm clamp?) of about 100/110mm length. I can offer a 140mm cinelli 1A, or a 70(?)mm cinelli 1A, both in reasonable but used condition as a trade, or let me know how much cash you're chasing.
I also need a 80-90ish mm long, 26.0mm clamp stem. I have a nice 135mm 3TTT motus that I'd trade for similar, or I can offer cash.
In addition to the stems, I also have a shitload of bartape lying around, as well as a bunch of nice velox rim tape that I'd be happy to trade. I've also got a bunch of new, unused mudguards (to suit 700c, 26" and 24(?)") and a couple of nice unused 26" velocity rims, though the latter two would be local trades only.
Not an expert with stuff so no idea if this is what you need, but I do have (obvioudly not cinelli):
- 100mm (centre to centre) Giant stem from a 2009 Defy 2. It was too long for me so I changed it to a 70mm one.
- Forks hole measures 28 - 29mm.
- Handlebars hole measures 26mm and is connected with four bolts.
- Not sure of the raise angle but looks about 8 degrees I guess?
- Weight is 148 grams. Aluminium I assume.
- Hardly used, fitted could pass for new.
- No good to me so I'd swap for a couple of sets of handlebar tape.
I'm a runner, but I sure love to ride!
sorry, I thought the [bne] in the thread title was sufficient.... do elaborate on your stems though
cheers for the offer but a newer giant will have a stem to suit a threadless headset, which isn't what I'm looking for. Thanks anyway.
Have 2x CINELLI XA ROAD STEMS, silver 10.5 and black 10.0
Both in good condition, would look at $40ono a piece.
I am in Perth, so there would be postage and handling,
so maybe it's better you go local.
Let me know your thoughts, can email or SMS photos.
Lone Rider- I rode on the long, dark road... before I danced under the lights.
ah, I'd kinda forgotten about this one. I've got the bike mostly assembled... with a long stem on there (probably too long). I'll probably try and get it running this week, and give it a test in its current setup and get back to you. Cheers for the photos
11 posts • Page 1 of 1
Who is online