FOR SALE: Various parts, mainly vintage road
LOCATION: Balwyn North, Melbourne. Prefer pickup, but will post
PRICES: Listed for each item, plus postage and packing if necessary
CONTACT: PM or email thespeedingtrain at yahoo dot com
I have some more parts up for grabs. They're mainly vintage road bits, plus a nice MTB stem.
Suntour Cyclone MK II rear derailleur. Short cage, friction. Strong springs. A little scuff on the lower left corner of the hanger body (see photo), but not too noticeable. Will polish up nicely
$30, or buy as a set with the matching front derailleur and shifters listed below for $50.
Suntour Cyclone MK II front derailleur. Spring still strong. A little scuffing mainly on the front of the inside of the cage, but not bad. Chrome in great shape. See photo. VGC
Suntour Cyclone MK II downtube braze-on shifters. Friction only, obviously. VGC
Dia Compe A C300G front and rear brake calipers. Short reach, recessed mount. Black annodising is faded in places, but still look good. Have original pads. VGC
Dia Compe A C250G aero brake levers. Levers in good shape, with no major scuffing or marking, but hoods could do with replacement (dry, cracked and dirty in places).
Dia Compe 400 GX front and rear brake calipers. Short reach, recessed mount. Fully rebuilt, with original pads. EC
SR Laprade fluted seatpost. 27.2 diameter. ~195mm rail to bottom of post. Some light zigzagging and marks, but no bad gouges or scrapes. Will polish up nicely with some elbow grease.
ALE small toeclips. Red annodised aluminium. Annodising is faded underneath and they're marked and scratched in places, but all in all still look pretty cool. Size is not marked, but appear to be small. Standard two hole mounts.
Belleri aero drop bars. Unique shape French bars, kind of a cross between a standard bar and track or crit. bars. Examine the photos to understand what I mean. Sleeve has no significant marking. Some tape residue, but no bad scratches. 25.4 clamp. 41cm centre to centre.
Weinmann brake lever. Never used, will polish up a treat. Great for a cruiser.
Raceface Prodigy threadless MTB stem. 130mm reach. VGC
Pickup is encouraged and is from Balwyn North, Melbourne. Will post, but postage and packing will be added.
PM or email thespeedingtrain at yahoo dot com