Members classifieds for selling bicycles / parts. PRIVATE OFFERS ONLY
7 posts • Page 1 of 1
Dura Ace 7402 wheelset laced to Mavic Open 4CD rims. Too many wheelsets around, so these will go. Lovely 7400 front hub radially laced to a Mavic Open 4CD with 32 bladed DT spokes. Rear is a 7402 UG 36h hub laced to a Mavic Open 4CD. It is originally for a 8s UG cassette, which youll get, but you can put anything on it with a little bit of modifying. Pictured is a 12-28t 10s cassette. Just file the skinny slot bigger, and any HG cassette will fit on the UG freehub body.
These have been cleaned and repacked, and adjusted well, and havent been used since. Lovely and smooth hubs, that are in great condition. NOTE: No tyres and tubes, and not the cassette pictured. You will get the original DA UG cassette. Looking for $250 or make me an offer.
Dura Ace 28.6 clamp on FD. Bit of rust on the cage, but it should clean up nicely. $20
Dura Ace 113mm BB with NJS English threaded cups and original balls. A little bit pitted. $15
Campag 111mm BB with Italian cups. No pics of the cups, but they are included. $20
7200 Dura Ace Hidden bolt 90mm stem. I believe these only came in 26.0 clamp. Missing the dust cap, and has some small sctratches on the top. $40
New Cane Creek 200TT brake levers. Bought these for the aero bars below, but I never used them. I only pulled them out of the packaging. $20 or $30 with the aero bars.
RS10 front rim and Unknown brand hard anodised 36h rim. Was laced to a 6400 hub previously. $10 each
Cinelli Campione del Mondo 66-44. Should be 26.4 clamp. My dodgy calipers measure in at 26.32. $30, all cleaned up and polished.
I think these are Profile integrated aero bars. Takes old quill stem. It is missing the blots to clampdown the arm rests, but really any can be used for that. $20
Profileclip on Aerobars with Ironman arm pads. $20
All items are available for pick up in Villawood, or Sydney Uni. I can post these if need be. Make an offer if you want.
I'll take the cane creek levers thanx Quang.
QV can I grab the Bars - Cinelli Campione del Mondo 66-44 please?
Postage would be to QLD 4121.
Let me total costs via PM and I'll do a direct deposit.
Cane Creeks, DA FD and Cinelli bars are sold.
DA wheelset now $200
DA BB $10
Campag BB $15
Aerobars are now $15 each
The rest remain the same and are still available, except for the Cane Creeks, FD, and Cinelli bars.
I'm assuming that bb Campag would fit an old 80's Colnago frame?
It should, but you need to make sure that the BB you've got is Italian threaded(right hand thread on both sides), and if 111mm is the correct spindle length you need(depending in your crank).
7 posts • Page 1 of 1
Who is online
Users browsing this forum: redsonic