Page 59 of 82

Re: Post your Fixie piccies

Posted: Mon Dec 03, 2012 4:23 pm
by ldrcycles
Damn that looks really cool. :)

Re: Post your Fixie piccies

Posted: Tue Dec 04, 2012 1:39 pm
by slidetaker
Very nice.....

if only th decals on downtube is gold too...

I like the seatpost the most as it matches in so well....what it is?

Re: Post your Fixie piccies

Posted: Tue Dec 04, 2012 2:03 pm
by Clownshoes
It's a carbon seatpost made especially for that frame bro.

Nah gold decals would look whack! The gold wheels are pretty wnky as it is :wink:

Re: Post your Fixie piccies

Posted: Tue Dec 04, 2012 2:46 pm
by slidetaker
can try black rims and go all ninja if you think gold is too wnky....I think the colour scheme worked for this frame...

may be I've seen too many all blacks before.....

Re: Post your Fixie piccies

Posted: Tue Dec 04, 2012 4:20 pm
by Clownshoes
Image

Chyeah normally run Ellipses but they are on my other fixed (track specific) bike now

Re: Post your Fixie piccies

Posted: Tue Dec 04, 2012 4:23 pm
by BRLVR.v2
Love it all black. Rear wheel needs more slammin.

Re: Post your Fixie piccies

Posted: Wed Dec 05, 2012 12:17 pm
by slimbolik
My latest Visp build.
Image

Another recycle ctr job

Posted: Wed Dec 05, 2012 9:55 pm
by whatsinaname
Giant Krono, circa 1985, last of the steel Giants apparently, now a single speed.

http://i1293.photobucket.com/albums/b58 ... 102002.jpg

Re: Post your Fixie piccies

Posted: Wed Dec 05, 2012 11:48 pm
by Dan
whatsinaname wrote:Giant Krono, circa 1985, last of the steel Giants apparently, now a single speed.

Image


There you go.
The gold on white is very, well, Singha...

Re: Post your Fixie piccies

Posted: Thu Dec 06, 2012 8:37 pm
by familyguy
Image

Unknown (probably Aussie) maker, big, solid. Put the Suntour Edge cranks on for now to see how it fits, going for something more suitable soon (and not 53!). BLB sealed bearing hubs on deep V running a 17T fixed one side, 15T fixed the other. Got some platforms and SGB straps to alternate with SPD's depending on mood. Got a drilled fork that will fit straight on for braked use.

Jim

Re: Post your Fixie piccies

Posted: Thu Dec 06, 2012 9:22 pm
by BRLVR.v2
familyguy wrote:Image

Unknown (probably Aussie) maker, big, solid. Put the Suntour Edge cranks on for now to see how it fits, going for something more suitable soon (and not 53!). BLB sealed bearing hubs on deep V running a 17T fixed one side, 15T fixed the other. Got some platforms and SGB straps to alternate with SPD's depending on mood. Got a drilled fork that will fit straight on for braked use.

Jim


Rock on ! Is this a replacement for the bent one?

Re: Post your Fixie piccies

Posted: Thu Dec 06, 2012 9:32 pm
by familyguy
Yep. Identical geo and size as the bent one. Seller (most excellently) shipped this one down free as a replacement, and we agreed to bin the other one. Swapped the fork, headset and BB over and plugged the rest on. Stripped the paint off the fork when I was convinced it was fully chromed, so it looks good with the red frame.

Jim

Re: Post your Fixie piccies

Posted: Fri Dec 07, 2012 12:43 am
by Brianmoose_
CST Czar wheels and new YBN white chain...

Image
(The handle grips got dirty as...but clean now :P )

Re: Post your Fixie piccies

Posted: Fri Dec 07, 2012 8:18 am
by BRLVR.v2
Brianmoose_ wrote:CST Czar TYRES and new YBN white chain...


FTFY...And the white chain won't be white for long :wink:

Re: Post your Fixie piccies

Posted: Fri Dec 07, 2012 9:48 am
by Dan
BRLVR.v2 wrote:
Brianmoose_ wrote:CST Czar TYRES and new YBN white chain...


FTFY...And the white chain won't be white for long :wink:


Eastern European Grey (its a colour, I've seen it) by midday.

Re: Post your Fixie piccies

Posted: Fri Dec 07, 2012 10:31 pm
by Mugglechops
Do videos count? Was trying out some different angles on this mornings ride

And I have gone back to flat bars, but I might need a bit longer stem.

[youtube]http://www.youtube.com/watch?v=Pe0aAn6qFFA&feature=share&list=UUv_N2TLz5k6bxiSS9TpUQ_A[/youtube]

Re: Post your Fixie piccies

Posted: Sat Dec 08, 2012 12:49 am
by MilkRacer
Got round to putting this one together just in time for summer. Replacement 1 1/4" threaded fork caused a fair delay eventially sorted by some sweet kit from Goldtech and Bontrager. Likin' the Cane Creek Wheels. :D Image

Re: Post your Fixie piccies

Posted: Sat Dec 08, 2012 5:54 am
by BRLVR.v2
[quote="MilkRacer" Image[/quote]

That frame needs it's gears back to exploit it's full potential.

Re: Post your Fixie piccies

Posted: Sat Dec 08, 2012 6:01 am
by Dan
^ +1

Re: Post your Fixie piccies

Posted: Sat Dec 08, 2012 11:29 am
by MilkRacer
Perth is flat. 50/16 pretty much covers the whole city, besides, still very capable as an SS. :wink:

Re: Post your Fixie piccies

Posted: Sat Dec 08, 2012 12:41 pm
by BRLVR.v2
MilkRacer wrote:Perth is flat. 50/16 pretty much covers the whole city, besides, still very capable as an SS. :wink:


Time to get serious then, magic gear and fixed FTW. :wink:

Re: Post your Fixie piccies

Posted: Fri Jan 11, 2013 8:24 am
by Brianmoose_
New stuff done to my bike coz got bored and a new bike is on it's way...

Started Bombing the Aerospoke
Image

Clear coating
Image

Painting the fork
Image

Finished
Image

Re: Post your Fixie piccies

Posted: Sat Jan 19, 2013 9:08 pm
by tgradd
Brianmoose_ wrote:New stuff done to my bike coz got bored and a new bike is on it's way...



What frame is that? it looks pretty sweet.

Re: Post your Fixie piccies

Posted: Sun Jan 20, 2013 4:16 pm
by HLC
dropped this off to get the chainstay repaired during the week.

Going to be built full campag. Just need to decide on a bar / stem set up. I have everything else.

Image

Re: Post your Fixie piccies

Posted: Wed Jan 23, 2013 12:34 pm
by Tbird
Holy clearances batman :shock: that rear tyre looks very tight!!!!!!!