cog question

The place for fixies and other rides without gears

cog question

Postby pembo6 » Wed Nov 28, 2012 8:04 pm

Hi. I am totally new to the whole fixie thing. I have a very newb question.

If I buy a flip-flop hub/wheel, wot sort of cog do I need? Will a 'track' cog work? I need 17 teeth. Or are standard track cogs the wrong size for a fixed side of the flipiflop hub?

Also, do I need a special size lockring. My understanding is that the fixed side has 2 different size threads. 1 for the cog and 1 for the lockring?? Is the cog thread the same size as the freewheel side? And then the lockring thread is smaller?

I don't want to end up with the wrong size cog or lockring when I buy onine.

Thanks for your help.
Posts: 23
Joined: Sun Sep 16, 2012 2:35 am

by BNA » Wed Nov 28, 2012 9:16 pm


Re: cog question

Postby BRLVR.v2 » Wed Nov 28, 2012 9:16 pm

Ignore the proprietary Surly references and it's all the same. ... .16.05.pdf

Also read everything in this
Posts: 725
Joined: Sat Jul 09, 2011 8:33 pm

Return to Fixed Gear/ Single Speed

Who is online

Users browsing this forum: No registered users

Support BNA
Click for online shops
Torpedo 7 Torpedo7 AU
Ground Effect Ground Effect NZ
Chain Reaction Cycles CRC UK
Wiggle Wiggle UK
Cycling Express Cycling Express
Ebay Ebay AU
ProBikeKit ProBikeKit UK
Evans Cycles Evans Cycles UK
JensonUSA Jenson USA
JensonUSA Competitive Cyclist