Masi Uno 2013

Cinelligazzetta
Posts: 3
Joined: Tue May 23, 2017 7:14 pm

Masi Uno 2013

Postby Cinelligazzetta » Tue May 23, 2017 7:17 pm

Do anybody have a Masi Uno ?

Have you ever replaced cranks ?

Baalzamon
Posts: 5341
Joined: Mon Mar 12, 2007 2:23 pm
Location: Yangebup

Re: Masi Uno 2013

Postby Baalzamon » Tue May 23, 2017 8:29 pm

Going off specs, it's a square taper bottom bracket so you want cranks to suit that, or change the BB to suit the new cranks.
Masi Speciale CX 2008 - Brooks B17 special saddle, Garmin Edge 810
Image

Cinelligazzetta
Posts: 3
Joined: Tue May 23, 2017 7:14 pm

Re: Masi Uno 2013

Postby Cinelligazzetta » Wed May 24, 2017 1:09 pm

Ordered Sram Omnuims with BB hope they fit :? :roll:

User avatar
Mulger bill
Super Mod
Super Mod
Posts: 28906
Joined: Sun Sep 24, 2006 2:41 pm
Location: Sunbury Vic

Re: Masi Uno 2013

Postby Mulger bill » Wed May 24, 2017 9:25 pm

Cinelligazzetta wrote:Ordered Sram Omnuims with BB hope they fit :? :roll:

With BB? Check spindle length against the old when it comes
...whatever the road rules, self-preservation is the absolute priority for a cyclist when mixing it with motorised traffic.
London Boy 29/12/2011

Cinelligazzetta
Posts: 3
Joined: Tue May 23, 2017 7:14 pm

Re: Masi Uno 2013

Postby Cinelligazzetta » Wed May 24, 2017 11:38 pm

Unfortunately its a completely different system. (sram omniums) External BB compared to the square taper one that it already has ! Im just gunna live in hope :roll:

Ant_S
Posts: 125
Joined: Tue Oct 07, 2014 5:49 pm
Location: Perth, WA

Re: Masi Uno 2013

Postby Ant_S » Fri Jun 23, 2017 11:51 am

I reckon you should be fine. The only issue sometimes with them is frame clearance with the spider to the rear chain stay cause they're really chunky, is that what you're referring to? There is a chart you can find online with a template so you can check your frame.

I changed a Fuji Track Comp over to SRAM Omniums with SRAM BB. I couldn't find anything at all online so I just bought & hoped and they fit no dramas. They also fit on my new frame which is a Hillbrick SS. I did read something about people sometimes using spacers but then some problems where the BB doesn't seat right or something so best not to do that.

From what I read it is a buy, hope, if they hit your frame, sell & buy some nice square taper cranks instead like Sugino 75s

Who is online

Users browsing this forum: No registered users