Popular Bike Shops
Join the Cycling Forums on Strava
Australian Cycling Forums on Strava
Latest Reviews and Articles
Will your next bike be Intelligent? ABS and Smart Bike Tech
Vitus Vitesse EVO Disc Review – Speed Machine indeed!
- Posts: 52
- Joined: Tue Mar 03, 2009 8:28 pm
- Location: Noarlunga, SA.
've got a JC70 Performer trike (same as Actionbent T1) and the idler and tube guides got destroyed. So I was wondering if anyone knew of a good unit that fits but is a upgrade. Here's a pic of the original type
Anyone think a dual pulley system would be better/easy to fit ?
- Posts: 1299
- Joined: Tue Oct 02, 2007 7:12 pm
- Location: Albany. 400km South of Perth
You need to straighten it. I plug an end. Hang it up with a weight at the end and fill with boiling water. You can use a heat gun too with care.
I heat the ends over a gas flame and push the end of a plumb bob in to flare the ends.
I've made them this way for years and they all work well on the different trikes and bikes.
- Posts: 1152
- Joined: Thu Oct 23, 2008 5:02 am
- Location: Spearwood, WA
Besides Greenspeed you may also try Trisled and Ian at Flying Furniture (as he sells Bacchettas and they use a dual idler system). You can even try making them yourself. Whatever way you go you'll need to buy either bearings or the finished product according to the axle or shaft that they fit onto, unless this was damaged too and you're making something different. By this I mean that the Internal Diameter of the bearing needs to be only a smidge greater than the Outside Diameter of whatever this all fits onto, if the ID is a lot greater than the OD then you'll need to pack the shaft, if the ID is smaller than the OD then you bought the wrong product and need to go shopping again.
Edit: These are on the WISIL projects page about making idlers. Do so at your own risk, I have better equipment such as a lathe and milling machine to do this.
And strangely enough I got the solid plastic rod offcuts to make the idlers from a bearing shop, you don't have to mug some kid in the park for his skateboard wheels.
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Fixed Gear/ Single Speed
- Electric Bicycles
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Road Racing
- Road Biking
- Time Trial
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Western Australia
- New South Wales
- South Australia
- Northern Territory
- Country & Regional
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Cycling Brands
- Malvern Star
- Custom Builders
- Generic Carbon
Who is online
Users browsing this forum: No registered users
About the Australian Cycling Forums
The largest cycling discussion forum in Australia for all things bike; from new riders to seasoned bike nuts, the Australian Cycling Forums are a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.