Dragster Tyres in 22 x 1 3/4_Who can I Reach for Sourcing

The home of 'cool'

Dragster Tyres in 22 x 1 3/4_Who can I Reach for Sourcing

Postby tollie » Fri May 25, 2012 8:51 am

HI all,

Am very new to the forum and new to all things dragster. I picked up an 'Advance' stickered dragster. The bike has an emblem on the headset displaying a winged bicycle wheel (in red) at the top, a map of Australia at the bottom and a red coloured star in each of the bottom 2 corners. It may be a Malvern Star? Can anybody advise on what they reckon the brand is???

More importantly I am stuck in a figurative 'rut' with the bike renovation. Reason being is that I have been unable to source a pair of tyres and tubes to match the original rims. The tyres presently on it are shot to pieces. I can make out the sizing specs written on the tyre wall - 22 x 1 3/4. Have tried a few places, in stores and online, without success. One online supplier advised the sizing of the tyres was unusual. They note that a regular sized tyre is 20 x 1.75 or 2.125.

Can anybody help with a source? Can I try any other tyre size that might fit the original rims?

Thanx, Tony
Posts: 1
Joined: Sun May 13, 2012 1:14 am

by BNA » Sun Sep 09, 2012 7:02 pm


Re: Dragster Tyres in 22 x 1 3/4_Who can I Reach for Sourcin

Postby BurtO » Sun Sep 09, 2012 7:02 pm

Hope this reply isnt too late , only 4 months so I hope your in no hurry , check these guys out for your tyres and tubes . gmxonline.
Posts: 59
Joined: Fri Sep 24, 2010 10:29 am
Location: Mildura

Return to Dragsters / Lowriders / Cruisers

Who is online

Users browsing this forum: No registered users

Support BNA
Click for online shops
Torpedo 7 Torpedo7 AU
Ground Effect Ground Effect NZ
Chain Reaction Cycles CRC UK
Wiggle Wiggle UK
Cycling Express Cycling Express
Ebay Ebay AU
ProBikeKit ProBikeKit UK
Evans Cycles Evans Cycles UK
JensonUSA Jenson USA
JensonUSA Competitive Cyclist