Chainrings

User avatar
Tim
Posts: 1327
Joined: Wed Jul 07, 2010 5:02 pm
Location: Gippsland Lakes

Chainrings

Postby Tim » Tue Sep 11, 2012 7:18 am

I'm hoping somebody knows what's what with small granny gears.
My tourer is fitted with a 74mm BCD, 26 tooth ring on the front. The cranks are made by Sugino and the rings are aluminium. I'd like to change the granny gear to a smaller, ideally, steel 24t ring, for lower gearing and better durability.
I don't know whether all 74mm rings are interchangeable/compatible. The bolt holes on Sugino rings are slightly recessed or countersunk, ie. the top of the bolt sits almost flush with the surface of the ring when fitted. I wonder if all chainrings are the same and if other brands will fit properly?

User avatar
RonK
Posts: 7844
Joined: Mon Aug 24, 2009 2:08 pm
Location: Brisbane, Queensland
Contact:

Re: Chainrings

Postby RonK » Tue Sep 11, 2012 8:32 am

Difficult to source. You need one of these - the 24T is steel.

I have a Stronglight chainset on my VN Pioneer - it uses the large and small chainring positions for chainguards. The forging mark on the back is XD2, which tells me it was actually manufactured by Sugino. The chainrings are recessed for the bolt heads as you mentioned.

Image

I got the chainset from Dotbike and they were good to deal with. After you order they'll contact you with the shipping price. Ideally for a low cost item like this you should try to combine with other items if possible.
Last edited by RonK on Tue Sep 11, 2012 8:39 am, edited 1 time in total.
Cycle touring blog and tour journals: whispering wheels...

User avatar
silentbutdeadly
Posts: 2214
Joined: Fri Apr 09, 2010 9:52 am
Location: Somewhere flat...

Re: Chainrings

Postby silentbutdeadly » Tue Sep 11, 2012 8:36 am

74 BCD rings should be interchangeable provided that they have the same no. of holes...

Stronglight are the only steel ones I've heard of... http://www.stronglight.com/stronglight/ ... yProd=74mm

Image

As for the bolts...not sure. But modern chainring bolts are very low profile so you shouldn't have a big problem if the Sugino bolts don't make great contact.

EDIT: Bloody hell...Ron...you got in there before me! However http://www.spacycles.co.uk/products.php ... b2s149p244 have them for 7 quid but you'd have to email them for shipping charges.
Ours is not to reason why...merely to point and giggle

User avatar
RonK
Posts: 7844
Joined: Mon Aug 24, 2009 2:08 pm
Location: Brisbane, Queensland
Contact:

Re: Chainrings

Postby RonK » Tue Sep 11, 2012 8:41 am

silentbutdeadly wrote:EDIT: Bloody hell...Ron...you got in there before me! However http://www.spacycles.co.uk/products.php ... b2s149p244 have them for 7 quid but you'd have to email them for shipping charges.

hehe, sorry about that, but I've done a lot of research into this very subject.

Oh, and Spa Cycles - sure have a lot of stuff but don't try dealing with them unless you are some kind of masochist... :roll: :lol: :lol: :lol:
Cycle touring blog and tour journals: whispering wheels...

schurms
Posts: 151
Joined: Sat Dec 26, 2009 7:33 pm
Location: Parkinson, Queensland

Re: Chainrings

Postby schurms » Tue Sep 11, 2012 10:29 am

I run TA Specialities. Zelito is their PCD 74 model - comes in black or silver. Not steel but you can not fault the quality. I have had no problems ordering from these guys in the past.

http://www.starbike.com/p/Specialites-TA-chainring-Z%E9lito-74-mm-2997-en


User avatar
Tim
Posts: 1327
Joined: Wed Jul 07, 2010 5:02 pm
Location: Gippsland Lakes

Re: Chainrings

Postby Tim » Tue Sep 11, 2012 4:37 pm

Thanks heaps fellas.
Think I'll take a punt and order the steel Stronglight. I'd be quite surprised if it doesn't fit.

Who is online

Users browsing this forum: No registered users