New connector with old chain?

Workshop tales, trials and disasters.
Maintenance tips, techniques and myths.
Technical discussion, description and outright lies

New connector with old chain?

Postby Jean » Mon Apr 21, 2008 12:13 pm

I'm about to replace my old chain and cassette but I'm thinking of keeping hold of them for those days when I have to tow my toddler around in his trailer (I've always thought that these towing duties must be hard work on my chain).

The cassette is easy as I can keep it on a spare wheel and swap it in/out as necessary but taking the chain off/on all the time would be bit of a pain unless I use a connector (it's a pinned Shimano chain so no connector used until now). I suspect using a new conector with an old chain will cause me hassles, but I thought I'd float the idea to see if anyone can tell me different.

Cheers
Jean
User avatar
Jean
 
Posts: 1459
Joined: Wed Feb 27, 2008 8:26 am
Location: Canberra

by BNA » Mon Apr 21, 2008 6:09 pm

BNA
 

Postby artemidorus » Mon Apr 21, 2008 6:09 pm

One link that is ~1% shorter than the others? I'd be surprised if you notice a problem, unless the old chain is really worn. I'd try it. If it doesn't work, you still have a new breakable connector.
artemidorus
 
Posts: 118
Joined: Fri Feb 23, 2007 10:27 am
Location: Sydney


Return to The Shed

Who is online

Users browsing this forum: antipodean, mitzikatzi



Top Bikes & Gear
Torpedo 7 Torpedo7 AU
Cell Bikes Cell Bikes AU
Ground Effect Ground Effect NZ
Ebay Ebay AU
Chain Reaction Cycles CRC UK
Wiggle Wiggle UK
ProBikeKit ProBikeKit UK
Evans Cycles Evans Cycles UK
JensonUSA Jenson USA
JensonUSA Competitive Cyclist