issues fitting a sigma BC1909R to my 2013 avanti cadent 2.0

[riles]

was given the computer as a christmas present, and have sucessfully managed to get all the parts on besides the "speed transmitter with O ring" which isnt fitting onto the frame and then allowing the spoke magnet to go around freely - ive put everything else together by following a video that i found, but cant seem to find a way to get the transmitter to fit and allow the wheel to spin.

any suggestions?

[macca33]

I take it that you're trying to mount the speed sensor to the front fork? If so, it will be positioned as per Diagram #7 of the manual - with the sensor pointing forwards from the fork, not inwards towards the wheel?

If it is mounted correctly, clearance should not be an issue.

Link from Sigma site re fitting:- http://www.sigmasport.com/en/produkte/b ... /temp.html" onclick="window.open(this.href);return false;

Cheers and enjoy!