Bryron Rider 40 setup problems

[4xsama]

Hi,

I am trying to setup a Bryton 40 but can't get a reading on the monitor.

Cadence and speed magnets are making the receiver flash red and green respectively but for some reason the monitor doesn't display. As I am indoors is there a GPS issue or is there alternatively a mode problem (I am in METER mode).

Cheers

[ianK]

Are the speed and cadence sensors switched on? Check settings - sensors. Rescanning the sensors might also sort it out.

[Wal42]

That's what happened with my 3 month old one before I fixed it permanently with a hammer & bought the other brand starting with G, 16 months down the track & the other one has performed virtually faultlessly. Probably not what you want to hear though.

[4xsama]

That's what happened with my 3 month old one before I fixed it permanently with a hammer & bought the other brand starting with G, 16 months down the track & the other one has performed virtually faultlessly. Probably not what you want to hear though.

Yeah, not really. Thanks for the post though. I really like your Avatar

[DarrylH]

Don't ditch it - my Bryton 35 is now 21 months old and still has great battery life.

[clackers]

4xsama, did you check that the sensor has been detected as Ian suggested?

You should see the speed/cadence icons on the display.

[4xsama]

4xsama, did you check that the sensor has been detected as Ian suggested?

You should see the speed/cadence icons on the display.

No. Is there a reboot or format function?

I see the lights flick over at the appropriate times so I guess the reader reads. Whether the sender sends or displayer displays is up in the air.

It's like the light are on but nobodies home.

[clackers]

Take up Ian's suggestion to Rescan. The ID of the sensor should be revealed. If not, change the battery as a first step.

[4xsama]

Are the speed and cadence sensors switched on? Check settings - sensors. Rescanning the sensors might also sort it out.

Fixed. Cheers.

Rescan worked.

Can I load up the odo reading from my Cateye so I don't restart from 0km's.

[clackers]

Are the speed and cadence sensors switched on? Check settings - sensors. Rescanning the sensors might also sort it out.

Fixed. Cheers.

Rescan worked.

Can I load up the odo reading from my Cateye so I don't restart from 0km's.

Don't think so. But could be wrong.

[beroz]

Try settings, bike profile,overview, select bike 1 or bike2, odo.

Sent from my HTC One X using Tapatalk 2

[4xsama]

Try settings, bike profile,overview, select bike 1 or bike2, odo.

Sent from my HTC One X using Tapatalk 2

Nope!

IS it just me or does Bryton have pretty crap*y instructions.

[clackers]

IS it just me or does Bryton have pretty crap*y instructions.

They are still crappy, even by Taiwanese standards.

The Swiss Garmin documentation must surely be better!