Converting SRAM Crankset to Shimano
Posted: Tue May 13, 2008 8:27 pm
Well I thought this was going to be an easy process. My SCOTT has an SRAM crankset and I thought I bought the bits to convert to Ultegra. I'm hoping someone can shed some light here....
The SRAM BB cups, left side screws in clockwise and the drive side screws in c-clockwise. Now the Shimano Ultegra BB cups (Brittish) I got seem to have a larger diameter than the SRAMS meaning they wont screw in to the frame. Also they both seem to screw in clockwise which I thought was odd. The arrow on the Shimano BBs are both clockwise yet the doco says they should screw like the SRAMs...thats got me stumped. I almost stuffed the old SRAM drive side BB as I thought it was the same as the shimano and I'm hitting the park tool with a hammer wondering why it wont unscrew....well now I know why, it needed to go the other way !!! damnn.. When I pulled the SRAM cups off water came out and the bearings run rough, I tell you this bike looked good but came with real cheap crap running gear !
Anyway so what I'm concerned with is, can I convert the SCOTT to Shimano from SRAM ? I'm really not sure what BB I can get to do the job. I will have to take the bike to LBS tomorrow in bits and see what can be done.
Pete
The SRAM BB cups, left side screws in clockwise and the drive side screws in c-clockwise. Now the Shimano Ultegra BB cups (Brittish) I got seem to have a larger diameter than the SRAMS meaning they wont screw in to the frame. Also they both seem to screw in clockwise which I thought was odd. The arrow on the Shimano BBs are both clockwise yet the doco says they should screw like the SRAMs...thats got me stumped. I almost stuffed the old SRAM drive side BB as I thought it was the same as the shimano and I'm hitting the park tool with a hammer wondering why it wont unscrew....well now I know why, it needed to go the other way !!! damnn.. When I pulled the SRAM cups off water came out and the bearings run rough, I tell you this bike looked good but came with real cheap crap running gear !
Anyway so what I'm concerned with is, can I convert the SCOTT to Shimano from SRAM ? I'm really not sure what BB I can get to do the job. I will have to take the bike to LBS tomorrow in bits and see what can be done.
Pete