Workshop tales, trials and disasters. Maintenance tips, techniques and myths. Technical discussion, description and outright lies
by janus77 » Thu Jun 05, 2008 1:55 pm
I removed the old tape from these bars last night, there's a heap of stick schtuff left on them, tried metho and kero.. anyone got any tried and true methods for removing the glue?

-

janus77
-
- Posts: 798
- Joined: Mon Aug 27, 2007 3:09 pm
by Forum Ads » Thu Jun 05, 2008 1:57 pm
-
Forum Ads
-
by janus77 » Thu Jun 05, 2008 1:57 pm
all I can find on the net is someone saying to use Turps and scrape the stuff off..
hmm, had another idea, maybe eucalyptus oil would be a goer.
-

janus77
-
- Posts: 798
- Joined: Mon Aug 27, 2007 3:09 pm
by m@ » Thu Jun 05, 2008 3:11 pm
You could try a citrus-based cleaner.
-

m@
- Super Mod

-
- Posts: 3989
- Joined: Tue Apr 15, 2008 12:20 pm
- Location: Brunswick East
-
by familyguy » Thu Jun 05, 2008 3:24 pm
Depends what you're doing...you're not retaping them?
Orange oil, steel wool and a little AutoSol to shine them up if you're doing the dog-c*ck partial tape job for a single speed or something.
Otherwise just scrape it back and tape over it.
Jim
-

familyguy
-
- Posts: 4449
- Joined: Wed Apr 16, 2008 2:30 pm
- Location: Cromer, NSW
by challs » Thu Jun 05, 2008 3:25 pm
Eucalyptus oil and a green kitchen scourer - shouldn't be so hard as to scratch the finish of the bars.
-
challs
-
- Posts: 192
- Joined: Tue Jan 01, 2008 1:17 pm
- Location: Windsor
by Jean » Thu Jun 05, 2008 3:27 pm
Citrus oil with rag followed by Chux Magic Eraser (I think that is what it's called) should do the job. BUt of you're taping over it again - don't bother.
-

Jean
-
- Posts: 1322
- Joined: Wed Feb 27, 2008 8:26 am
- Location: Canberra
by Matt_Matt » Thu Jun 05, 2008 6:08 pm
Head to your local autobarn and pick up some "Prepsol or Prepwash"
It's a liquid hydrocarbon degreaser.
Matt
-

Matt_Matt
-
- Posts: 1362
- Joined: Tue Aug 14, 2007 9:52 pm
- Location: Mornington VIC
by VIC Mech » Thu Jun 05, 2008 6:37 pm
Sounds odd I know but you could trynail varish remover and it comes on handy little cloth pads too...so my wife says!
Cheers m'dear, JJ
-
VIC Mech
-
- Posts: 23
- Joined: Mon Apr 28, 2008 7:27 am
by nzdans » Thu Jun 05, 2008 7:46 pm
OK, been doing this one way too many times; Nulon Brake Cleaner from Super Cheap + a decent sized rag-guaranteed. The can of brake cleaner will set you back about $10 (don't bother with the cheaper stuff, it is rubbish), you will use at most 1/4 of a can to do the bars and will find it a great resource to have in the garage for other jobs. Beware it will give some plastics a hard time if rubbed in.
Edit:I should mention, any other quality brake cleaner will also work great. Unless you plan on using the bars sans tape you could always cover the sticky stuff with...
handlebar tape!!?
-

nzdans
-
- Posts: 118
- Joined: Thu Apr 24, 2008 7:53 pm
- Location: Coburg, Melbourne
by lisanne » Thu Jun 05, 2008 8:11 pm
challs wrote:Eucalyptus oil and a green kitchen scourer - shouldn't be so hard as to scratch the finish of the bars.
+1 for eucalyptus oil it's great at getting left over sticky stuff like that off
-
lisanne
-
- Posts: 194
- Joined: Fri May 09, 2008 7:07 pm
- Location: Thornbury, Vic
-
by 531db » Thu Jun 05, 2008 9:17 pm
lisanne wrote:challs wrote:Eucalyptus oil and a green kitchen scourer - shouldn't be so hard as to scratch the finish of the bars.
+1 for eucalyptus oil it's great at getting left over sticky stuff like that off
plus 2, I use Bosisto's Eucalyptus Spray and Home Brand 'green' scourers.
-
531db
-
- Posts: 969
- Joined: Mon Nov 20, 2006 6:25 pm
- Location: Riding a real steel bike - somewhere!
Return to The Shed
Who is online
Users browsing this forum: No registered users
|
|