A silly question about wheels.

Workshop tales, trials and disasters.
Maintenance tips, techniques and myths.
Technical discussion, description and outright lies

A silly question about wheels.

Postby thecaptn » Sun Jun 23, 2013 1:51 pm

Hi All,
I have fulcrums on my road bike and am looking at a second hand mavic wheelset to set up for climbing, will the casette sit in the same position relative to the rear deralier on both wheels or will I need to fine tune the deralier every time I change wheels?

Also, I'm running 10 speed at the moment, if these mavics are set up with an 11 speed hub how easily can one obtain a spacer for fitting a 10 speed casette?

Thanks,
Pete
User avatar
thecaptn
 
Posts: 783
Joined: Wed Mar 17, 2010 7:28 pm

by BNA » Sun Jun 23, 2013 1:58 pm

BNA
 

Re: A silly question about wheels.

Postby Duck! » Sun Jun 23, 2013 1:58 pm

Mavics from way back have been supplied with a 2mm thick spacer (way before 11-sp. was even thought of, it's a compensatory spacer to take into account the wider cassettes when set up for Campagnolo). Simply ensure both this spacer and the thin one that goes with the 10-sp. cassette are fitted & you're away. You may need to adjust the derailleur slightly, but there's no way of knowing until you chuck the wheels in & give them a spin.
I had a thought, but it got run over as it crossed my mind.
Duck!
Expert
 
Posts: 1690
Joined: Tue May 21, 2013 8:21 pm
Location: On The Tools

Re: A silly question about wheels.

Postby thecaptn » Sun Jun 23, 2013 4:16 pm

Thanks Mr Duck!.
User avatar
thecaptn
 
Posts: 783
Joined: Wed Mar 17, 2010 7:28 pm


Return to The Shed

Who is online

Users browsing this forum: No registered users



Popular Bike Shops
Torpedo 7 Torpedo7 AU
Ground Effect Ground Effect NZ
Chain Reaction Cycles CRC UK
Wiggle Wiggle UK
Ebay Ebay AU



InTouch with BNA
“Bicycles BNA Twitter
“Bicycles BNA Facebook
“Google+ BNA Google+
“Bicycles BNA Newsletter