Workshop tales, trials and disasters.
Maintenance tips, techniques and myths.
Technical discussion, description and outright lies
14 posts • Page 1 of 1
So, I had the rear mech snap on me the other day, driving the chain between the cassette and the spokes.
Also caused the hanger to bend to an unacceptable angle, thus requiring replacement.
A search of most on-line bike stores (Wiggle, Cell, PBK etc.) shows a few aftermarket (I think) hangers with codes that make no sense to me (CB06 for example).
Without having to look at each hanger on each website, how can I determine which one will fit my Gitane Mach 1800 frame? Some don't even mention which bikes they suit.
I'm guessing I'm in for a long review of all hangers, or doing a visual comparison and hoping for the best.
Go to pushys site they have some detail about the brackets and you be able to get the part no. from http://northshorebillet.com/products/de ... r-hangers/ Otherwise you have to buy genuine. The worst thing they ever done was stop using dork rings on bikes, once the chain gets caught between the cassette and spokes normally drags the derailleur in with it
Last edited by Dragster1 on Wed Jan 22, 2014 3:46 pm, edited 1 time in total.
If you have trouble you could always contact Wheels Manufacturing via the link below. They make a vast assortment of hangers that are reported to be stronger than some of the OEM hangers.
True, but the original one on my bike was going out of alignment just from removing the back wheel. I needed one a bit stronger than that!
They will!! you have to put the skewer back in the original position and tension. You notice it more with disk brakes the rotor rubs sometimes
Well, I got home and decided to have a look at the old hanger to see if it could be resurected - no such luck as it has bent way out of shape.
Had a close look at it and found some markings on it - Wheels Mfg 42, which led me to this site via Google, and also to this site which is an Aussie site, so even better.
Going to order one now. Free delivery from ACT to home - can't ask for better than that.
Wheels Manufacturing have probably the most comprehensive collection of aftermarket hangers in the world - 200+ of the damn things!
Good to hear you've found some ID markings, 'cos otherwise you would have to trawl through the whole lot to match it up!
I had a thought, but it got run over as it crossed my mind.
Pardon my curiosity but do you have any idea what caused the rear mech to snap? Usually it is something else that causes this, most notably the chain going into the spokes, possibly due to misaligned RD settings; or some object going into spokes/chain. RDs are built pretty robust, usually more than suficient to resist unwarranted snapping.
Just a puzzler I'd reckon. Seems more likely - something snagged up chain and/or RD --> chain goes between spokes & cassette --> RD gets dragged around and twisted sufficient to break it. Somewhere in this procession, your derailleur hanger was twisted up.
Riding bikes in traffic - what seems dangerous is usually safe; what seems safe is often more dangerous.
The rear derailuer snapped at the hanger and got tangled up with the chain via the jockey wheel assembly, causing the chain to wrap between the cassette and the spokes.
My best guess is that the jockey wheel assembly then broke from the derailuer and travelled around the cassette and into the hanger.
Only guess work though, as I was trying my best not to slide down the road.
As a reference for any future searches by forum members or the like, I use soshanger.com. Excellent service, quick delivery and an extensive catalog of hangers and other stuff!
n=10 (2013 & 2004 roads,2010 track,2x 2009 foldups,1990 hybrid,1992 trainer,2007 rental,1970's step through,1980's zeus)
I've bought a couple of hangers from http://derailleurhanger.com/?ppcseid=20 ... pAodhCUAQA
Huge range and beautifully machined (much better than originals) at a reasonable cost. Pretty quick delivery too. They claim to have the largest range in the world.
Edit: They don't appear to list anything by Gitane, but they do have photos. The hanger you're looking for may not have been made by Gitane.
Also found this... http://www.schaltauge.com/Gitane-Rear-D ... Hanger-026
14 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users