Tooth Thicknesses

Where speeds may exceed 60 kmph

Tooth Thicknesses

Postby JB » Tue Mar 06, 2012 1:55 pm

Track cogs seem to be available in either 3/32" or 1/8" tooth thicknesses. eg

no idea what this means or what thickness I should buy.

I'm gearing up a new Avanti Pista 2012

Any help appreciated.
Posts: 255
Joined: Thu May 19, 2011 4:45 am

by BNA » Tue Mar 06, 2012 2:15 pm


Re: Tooth Thicknesses

Postby JB » Tue Mar 06, 2012 2:15 pm

Traditionally before bikes had gears and multiple sprockets on the rear the standard for chains and sprockets was 1/8". When derailleurs with multiple sprocket cassettes started they had to make the sprockets thinner to fit them all in so they made them 3/32". Single speed track bikes still use 1/8" sprockets and chain and I checked the spec in the link you posted and your bike has a 1/8" chain so you will need a 1/8" sprocket. The reason you can buy 3/32" single sprockets is that people often want to use a chainwheel from a bike with gears to to create a single speed bike so they already have the narrower chainwheel but it is not a good idea because narrow chains are not as strong as the 1/8" chains used on track bikes

thanks for the reply above,

Posts: 255
Joined: Thu May 19, 2011 4:45 am

Re: Tooth Thicknesses

Postby tripstobaltimore » Tue Mar 27, 2012 7:41 am

I might just add to that -

There's no issues with 3/32" strength, so don't worry about that.

With 1/8" you can use 3/32" cogs if necessary, but not vice versa.

In my experience, I've found finding 1/8" parts easier.
Posts: 916
Joined: Fri May 29, 2009 10:59 am

Return to Track

Who is online

Users browsing this forum: No registered users

PM Issues
Known Bug - error message displayed when sending PM's caused by tapatalk. Read more

Popular Bike Shops
Wiggle Wiggle UK
Ground Effect Ground Effect NZ
Ebay Ebay AU
Chain Reaction Cycles CRC UK

“Bicycles BNA Twitter
“Bicycles BNA Facebook
“Google+ BNA Google+
“Bicycles BNA Newsletter

> FREE BNA Stickers
> BNA Cycling Kit