Popular Bike Shops
Join the Cycling Forums on Strava
Australian Cycling Forums on Strava
Latest Reviews and Articles
Will your next bike be Intelligent? ABS and Smart Bike Tech
Vitus Vitesse EVO Disc Review – Speed Machine indeed!
- Posts: 376
- Joined: Tue Aug 18, 2015 11:12 pm
- Location: Perth, WA
- Bunged Knee
- Posts: 804
- Joined: Fri Mar 27, 2015 12:29 pm
- Location: Not drowning in Parramatta river yet
AlexHuggs wrote:Where'd you get those reflectors on the spokes? Great idea.
You`ve missed it. It was sold in Aldi last month.
But you can buy it from ebay. Just input "spoke reflector tubes" in search bar. From ebay it sell 12 tubes per pack.
- Posts: 128
- Joined: Thu Oct 29, 2015 6:37 pm
- Location: Dunsborough, WA.
So after a bit of googling and seeing what was available here at the local bike shop I purchased a 2015 Fuji Traverse 1.3 disc, discounted to $800 end of financial year deal, great bang for buck.
I've been riding it everyday and liking it, a faster smoother ride then the old Sedona and a well worthwhile upgrade.
The seat had to go and I replaced it with a Acentia Pax Aura Comfort Saddle, much better. I also fitted a topeak 29er disc rack and MTX trunk bag DX, which is a much better option then a backpack and easily fits my daily needs and shopping.
So here it is...
- Posts: 286
- Joined: Thu Nov 12, 2015 10:33 pm
- Location: Eastern Suburbs, Sydney
Here are our new bikes
Brought for 500 bucks off Gumtree. 2013 Focus Planet TR 2.0
Chain driven Alfine 8
Seems standard spec, I've just added A530 spd's.
Need to trip the steerer and learn how to set up and adjust the Alfine
Cell Ultimo 1.0 brought new for 599 bucks from the store on Paramata Rd
Removed the big chain ring and shifter to convert it to 1x8 which seems ideal for the city based on today's ride. Needs a narrow wide chain ring so I can remove the front mech too
Changed the saddle for a women specific one of Nat's road bike
Added A530 spd's
Need to shorten the chain, trim the steerer and replace the crappy tyres
We went for a good test ride today. Randwick to the Opera House, lunch then round to Watsons Bay before heading back to Randwick
Apart from me popping a spoke in the rear wheel for some unknown reason (need to find a lbs near Randwick) we are both really happy with our new urban rippers. Ride positions seem spot on, gearing is good. Fast enough, confident in traffic, etc etc
In the process of researching dynamo lighting and phone charging
- Posts: 173
- Joined: Fri Feb 06, 2015 9:15 am
Frame: On One Inbred 29er
Fork: On One Carbon
Brakes: Hope V-Twin
Wheels: Prolite Revo
Chainring: E*Thirteen guide ring (narrow wide)
Bottom Bracket: Hope Ceramic
Mounting of the guards was a bit of a job, and the front still needs a little work to look the goods (functionally their fine, but cable ties are a bit ghetto)
I also want to get a part 3D printed to mount the Fly6 to the rack directly, the piece of irrigation pipe induces a bit too much wobble for a stable picture.
- Posts: 3439
- Joined: Tue May 29, 2012 2:38 am
- Posts: 7280
- Joined: Mon May 09, 2011 8:42 pm
- Location: Sydney
- Posts: 2254
- Joined: Fri Apr 17, 2009 9:44 pm
- Location: Middle East, Melbourne
It was cheap - so I won't be too sad if it gets bent/pinched.
Full length guards - a bit of a fiddle to install, and only just clear the tyres, but they've already proved their worth.
Pannier rack - More importantly the frame is long enough at the back to let me pedal without knocking the pannier with my heel.
Dynohub - SP-PD8, complete with 6 bolt disc mounting, in case it has to do duty on a disc braked bike
B&M Fly IQ light - Surprisingly effective, I was looking at a Herrmans light that has more grunt, but I'm not in a hurry to buy it now.
It has a bit of retro charm with the Adamas AX groupset too, although the front wheel was swapped for the dynohub wheel, so now it has a 700C front and 27" rear.
There are a couple of changes on the cards. Changing the brakes would give me some more clearance to play with so that I could put a 700C on the rear as well, which would allow a better choice of tyres and spares options. The cranks are 165mm, which are good for spinning, but I'd prefer my usual 175's, and if I was going to change them I might as well flog the whole groupset off complete.
- Posts: 2300
- Joined: Sat Jul 14, 2012 5:01 pm
- Location: Sydney
The bottle cage, wheels, fork, crankset, and pedals came from dismantled bike #3.
Brakes and shifter was donated by a mate, as a payment for service on his steel bike.
Seatpost from a mate too, as tip for replacing the cranks of his carbon bike.
Handlebar grips, a donation from a mate.
Saddle, Stem, and bottom bracket are new second hand parts.
Handlebars, Chain, Cassette, chainring and RD from my bike #32 that is now running 11 speed.
I have now spent my lunch time wisely
- Posts: 1625
- Joined: Tue Sep 01, 2009 12:21 am
- Location: Perth, Western Australia
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Fixed Gear/ Single Speed
- Electric Bicycles
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Road Racing
- Road Biking
- Time Trial
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Western Australia
- New South Wales
- South Australia
- Northern Territory
- Country & Regional
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Cycling Brands
- Malvern Star
- Custom Builders
- Generic Carbon
Who is online
Users browsing this forum: splash_dad