Popular Bike Shops
Join the Cycling Forums on Strava
Australian Cycling Forums on Strava
Latest Reviews and Articles
Will your next bike be Intelligent? ABS and Smart Bike Tech
Vitus Vitesse EVO Disc Review – Speed Machine indeed!
- Posts: 9
- Joined: Sun Jan 22, 2017 12:50 pm
- Posts: 2489
- Joined: Wed Sep 22, 2010 11:24 pm
- Location: Melbourne
- Posts: 5341
- Joined: Sun Jan 20, 2008 4:35 pm
- Location: Elimbah, Queensland
koshari wrote:Sks thermoplastic full fenders are pretty good and reasonably priced.
Unfortunately the way the stays are attached to the front guards means that water dams up under the guards and then forced out the sides over your feet and legs. If the stay connections where mounted to the outside they would be much better.
- Posts: 138
- Joined: Thu Oct 29, 2015 6:37 pm
- Location: Dunsborough, WA.
When rain levels unexpectedly exceed a certain volume it really doesn't matter, you are going to get wet, no matter what water protection your bike or you wear.
I do have a wet weather coat when I think I could get caught out, though that is only good for light rain and almost at destination situations.
It's not usually a pleasing experience, though sometimes it can be kind of refreshing. It's not life threatening, surprisingly enough, the human body is water proof, also that warm shower and prepared change of clothes at the destination just feel great.
- Posts: 2374
- Joined: Fri Apr 17, 2009 9:44 pm
- Location: Middle East, Melbourne
ioanna wrote:Heh, those lights look amazing. I wouldn't have a clue how install a dynamo hub though, so maybe I'll stick to regular lights for now. I'm still contemplating whether I should attempt to fit full length fenders or go with the plastic clip-on ones. Full length seems better but I'd probably need to get them installed at a shop.
There is not much 'installation' to do with a dynohub. Most people buy them already built into wheels. Only nerds like me will buy the hub and rebuild the wheel. After that it is only a question of stringing the wires, which only has to be done once, and a bit of insulating tape does the trick pretty well.
You will have to learn how to attach the wires to the hub, for the occasions where you need to remove your wheel, but it is not difficult. Most often the wheel comes off without thought, you only need to know how to re-attach them.
Once it is installed and running you can be comfortably assured that your lights are always doing their thing and apart from wiping the dust off the lenses they just always work.
Full length guards are the way to go, particularly with the front. (I just failed at attaching a flap, so I will have another go), If your guard doesn't stop the spray from going into your down tube (where it then deflects sideways onto your shoes, and chain) then it is not achieving all that you would want.
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Fixed Gear/ Single Speed
- Electric Bicycles
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Road Racing
- Road Biking
- Time Trial
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Western Australia
- New South Wales
- South Australia
- Northern Territory
- Country & Regional
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Cycling Brands
- Malvern Star
- Custom Builders
- Generic Carbon
Who is online
Users browsing this forum: No registered users
About the Australian Cycling Forums
The largest cycling discussion forum in Australia for all things bike; from new riders to seasoned bike nuts, the Australian Cycling Forums are a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.