Popular Bike Shops
Join the Cycling Forums on Strava
Australian Cycling Forums on Strava
Latest Reviews and Articles
Will your next bike be Intelligent? ABS and Smart Bike Tech
Vitus Vitesse EVO Disc Review – Speed Machine indeed!
- Posts: 939
- Joined: Thu Nov 11, 2010 9:13 pm
- Location: Melbourne VIC
As you know, engines have torque curves - where torque increases with rpm gets to a maximum and then decreases. The peak of this curve is the most efficient rpm for the engine and returns the best fuel economy - typically 3000-4000 rpm for a car, depending on the engine design.
We humans have a similar, peakier curve where we have an rpm range for maximum efficiency; however I understand that, most people tend to ride below this. Research has shown that the maximum efficiency cadence is typically between 85 - 100 rpm, with less experienced riders doing something like 60-70 RPM.
How do I determine my optimum cadence at the peak of my power curve for - (i) Optimal cadence for flats and (ii) Optimal cadence for hills?
What does optimum cadence mean?
I do understand that optimal cadence is a personal thing, and will change as fitness levels change.
- Posts: 9466
- Joined: Mon Sep 26, 2011 6:11 pm
- Posts: 8742
- Joined: Thu Sep 18, 2008 12:10 pm
- Location: Sydney
Krank wrote:The peak of this curve is the most efficient rpm for the engine and returns the best fuel economy - typically 3000-4000 rpm for a car, depending on the engine design.
Best fuel_economy_for_power_produced in petrol powered cars is typically around 2000 rpm.
https://en.wikipedia.org/wiki/Brake_spe ... _statistic
- Posts: 9466
- Joined: Mon Sep 26, 2011 6:11 pm
Marx wrote:Buy/install a power meter.
Wonder no more.
Indeed. Do 60 minutes flat out at 60rpm. Then next week, do 60 minutes flat out at 70rpm. Then following week, 80rpm, then 90, then 100, then 110rpm. And give us an RPE for each one too.
And after that, the findings can be presented here with graphs showing HR drift, power, cadence, etc.
That should keep the OP busy for a while.
- Posts: 1665
- Joined: Sat Feb 09, 2013 5:45 pm
2. Human physiology is complex. Some riders are limited by heart, lung capacity. Others, especially beginners will feel the lactic burn before anything else. That's why we have threshold power, threshold hr, lactic threshold etc. All different.
3. Wrt the comment about cars being most efficient at 2000rpm. It's only true because we have speed limits that mean the car can't use full power. Maximum thermal efficiency occurs at peak torque, which is usually peak power. The reason why this doesn't correspond to peak efficiency is because you are not using all the power.
Cushy dirt bike
No brakes bike
- Alex Simmons/RST
- Posts: 4552
- Joined: Fri May 02, 2008 3:51 pm
IOW cadence is not something we can independently control. Cadence is an outcome of two things we can control, being i. gearing choice and ii. effort level (power) and those factors we mostly can't control, i.e. external resistance factors such as air resistance, gravity, rolling resistance etc.
IOW you don't choose to ride at a cadence, you choose to ride at a given effort level and gear. Thinking cadence is something one can optimise is one of the great cycling myths.
Why doesn't anyone ask "what's the optimal pedalling torque?"? (The answer to the quoted question would be the same BTW).
Not sure what research you read. In terms of efficiency, the highest efficiency is typically attained at cadences lower than what most people ride at. Cycling isn't typically a fuel economy drive in any case.
- Posts: 1946
- Joined: Thu Jan 14, 2010 2:06 pm
- Location: watching the 11
Alex Simmons/RST wrote:IOW you don't choose to ride at a cadence, you choose to ride at a given effort level and gear. Thinking cadence is something one can optimise is one of the great cycling myths.
I think, with practice, you are getting better at answering this question.
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Fixed Gear/ Single Speed
- Electric Bicycles
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Road Racing
- Road Biking
- Time Trial
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Western Australia
- New South Wales
- South Australia
- Northern Territory
- Country & Regional
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Cycling Brands
- Malvern Star
- Custom Builders
- Generic Carbon
Who is online
Users browsing this forum: No registered users
About the Australian Cycling Forums
The largest cycling discussion forum in Australia for all things bike; from new riders to seasoned bike nuts, the Australian Cycling Forums are a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.