Popular Bike Shops
Join the Cycling Forums on Strava
Australian Cycling Forums on Strava
Latest Reviews and Articles
Will your next bike be Intelligent? ABS and Smart Bike Tech
Vitus Vitesse EVO Disc Review – Speed Machine indeed!
- Posts: 461
- Joined: Fri Sep 27, 2013 10:52 pm
- Location: Beverly Hills NSW...Yeehaaaaa!!
About 2 and a half Months ago I purchased a new Vivente Patagonia from Omafiets Dutch cycles in Redfern Sydney and I thought I'd write a short term review of this bike.
I previously had an older 2013 Vivente with front mech disc brake and canti on the back, the tekking bar model with Deore rapidfire shifters similar to the current Anatolia, but have sold it now as I wanted the Patagonia. I was interested in either the Deccan with drop bars and Sti shifters but mech. discs on both ends as well as the Patagonia with barend Durace shifters and hydraulic TRP brakes on both ends but after test riding both not knowing if i could live with barend shifters, I actually loved the concept and found it a non-issue to get used to them and i loved the power of the hydraulic brakes so it was a no-brainer for me then which one to choose.
I've been mostly riding the new bike to work and it's a breeze, the better AXA70 lights run off the SP Dyno hub are pretty darn good and will stay on in a dimmer light for around 5 minutes when waiting at traffic lights as does the rear light...it was so much brighter than the headlight on the previous Vivente which was adequate but not great.
The beam length and width are pretty good and I can see a decent way in front of me as well as out the sides so i'm pretty happy with this set-up. Haven't tried the USB port to charge my phone yet, gotta buy a new cable just for that.
The pedals are Shimano SPDs with clips on one side and a flat on the other catering to any shoes I choose to wear, they are of a good size too with the non-clip side having a decent platform and support for ordinary non-SPD shoes.
The bar-end shifters are great but sometimes i find a bit of a lag in the changes at the back but nothing to get concerned about, maybe initial stretching perhaps, might get it adjusted if it gets worse.
One of things that i noticed when after taking off my front Tubus racks from the older bike to put on the new one was that the mounting points on the front forks were different, in fact the whole fork was a different design than the older one...so got the bike shop to fit them for me so i can see how they've mounted them. The racks now seem to be tilted a bit forward now compared with the older bike but i don't think it'll make much difference and haven't had a chance to put the front Ortliebs on it yet.
The seat is much nicer on the butt than the older style but i think I may have to put on a shorter stem as the reach and height is just a little out of my comfort zone...a little too much stretch but maybe that's just my tired old body not adapting as well as I hoped
But apart from the slightly long stretch, the bike is comfy, easy to ride, feels solid and smooth on the road, brakes like super stoppers with little effort.
As well as being designed for being a touring bike, it's also a fantastic commuter, not exactly light weight at 14KG's but it holds the road with a solid feel.
One of my concerns was touring with hydraulic brakes and if boxing up the bike and putting it together would cause trauma to the Hydraulic cords etc. but after having a chat with Noel McFarlane who often tours with Hydraulic brakes on his Vivente, he assured me it's the best way to go and shouldn't worry about it. The only thing i need to be wary off is that if I have to take the front wheel off, is to not touch the brake levers (not always so easy to remember) and place the imitation rotor disc in between the pads to stop them from closing up.
Another thing i noticed only last week when i took the bike on the train so i can go for a city ride was that the front tyre was a Shwalbe Marathon 700C x 32 whilst the rear was a Shwalbe Marathon 700C x 35. Don't know why that would be or if it'd make any difference but i thought rather odd and never come across 2 different tyre sizes on a brand new bike.
As you can see I'm still discovering new things on the bike i may not have noticed or realised straight after purchasing....
Overall, I'm very happy with the Patagonia and wanting to get more time on it, it really looks and feels like the touring bike it's designed to be. Hopefully in the future I can update this review with a longer term review after a few thousand kms under the belt.
At a RRP of $2,749 is it worth the money? well I think so, compared with other like touring bikes I've seen and read about, it's up there with the best in it' price range, if not better with the gear that's included in the price like hub Dyno's, Hydraulic brakes, mudguards etc, you should see the accessory box that came with it...holy smokes, I don't know what or where half of the stuff does or goes but with a bugle horn and a disc spacer, a heap of different size brackets, spare 14g ss spokes etc....sure there's more expensive tourers out there especially those fitted with the Rohloff Hub gearing or pinion gearing systems that are actually built into the frames when they are made, but they are up around the $4500-$6500 mark.
So to finish off this review, I'm very happy with my choice of purchase, time will tell how it goes in the long term but the bike is well built, i'm not a light bloke at 110kgs so if it'll cope with me and some luggage, I'd say i'm on a winner here
- Posts: 725
- Joined: Sun Apr 19, 2009 8:47 am
Re bar end shifters, I also like these and have them on three bikes running the 10 speed road front and rear derailleur bits. My road bike has the newer black pod index only ones which is a bit disappointing to loose that friction option. I guess I like them because they just work, are easy to fit, tune, use, repair and also that braking is best done by a dedicated lever (to me this is much better than brifters but others will differ in what they call performance and thought preference) on both rim and mech discs.
Suggest you may/ will loose the lag and find better shifting with the housing (and cables) out from under the bar tape. I just let the ferrule hold the housing in the bar end pod and run the housing floating about in a loop to the down tube cable stops. May not work so well if you have a large handle bar bag but I do lug a few things off my bars and just move the housing about to suit what I wish to carry. Just built up a new bike for bike packing (all-city macho man) with full rear housing and a top pull cx front and gave it a couple of layers of electrical tape at the bottom ends of the handle bar just to hold the hosing in place and it seems to shift just as well. The full brake housing on this frame lend the bike to hydros but as I built it up from about 90% shed / spare bits the bb7s the will do for now. (Really should post a pic as very few all-city bikes can be seen in oz and they are solid but very well balance bikes)
Oh and yes indeed it does irk me how any new bike, road, mtn, touring, city can be sold without the extra bits. Several spare spokes and nipples to suit the bikes wheelset cost nothing. Many people may never need them but it helps to have them about when you do break one, even if you cant do the DIY fix any bike shop will have the right length and hopefully the same batch to mend to back to new (also helps in buying spares when you have a spare spoke in hand and not stuck in some weird place like in the wheels)
- Posts: 461
- Joined: Fri Sep 27, 2013 10:52 pm
- Location: Beverly Hills NSW...Yeehaaaaa!!
As much as trying to avoid the N+1 feeling.....with this bike, I was too weak to fight it
I think the slight lag in the gear changing isn't that bad and it's only sometimes, might have something to do with the way I'm using them too...not sure. Mine has the 46/36/24 front chain wheel and a 9 speed cluster but not sure of the sizes without referring to the website....haven't had to use the granny just yet but mainly place the chain on middle ring at the front and go from there occassionaly flicking up to the bigger ring. The rear set has the indexed bar end and the front end has the friction which is pretty good.
I'm a bit of a traditionalist, I reckon a touring bike not only has to act the part but it also must look the part, if the Bar end configuration is so old hat, why would they still be used on many top end tourers.
I had the brifters on my Fuji Touring bike about 12 years ago now and they were good and easy to use, actually i quite liked them and is why I had a tough time deciding between the Decca and Patagonia, the former having brifters and the latter having bar-ends but nowadays, Fuji Touring bikes have gone back to the Bar-ends too so there must've been a reason for this whether they tried to be more of tradition or function.
I always carry a handlebar bag on a click shift connector from the handlebar so i like the idea of the braking and gear cables are mostly out of the way which is another thing that turned me away from the Decca because the brifters cabling was sticking out way in front....looked a bit untidy to me.
Just before I close this off, I rang up the bike shop in regards to the tyre sizes and they said because the rear tyre takes more weight, they place a bigger tyre on the back compared to the front tyre and that gives them a comparable tyre pressure on both ends. If the tyre sizes were the same on both ends, the pressures at the front would make the front more harsher the ride. Now I don't know how much difference that really makes but on the older Vivente I had 700C x 38's on both wheels and I found the bike to ride nicer than the old 35's they replaced but I did find that the 38's took a bit more energy to push than the 35's and I thought that it was something to do with the fact that the Shwalbe Marathons only had the 3mm puncture protection compared to the Marathon plus's 5mm protection.....buggered if I know!!
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Fixed Gear/ Single Speed
- Electric Bicycles
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Road Racing
- Road Biking
- Time Trial
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Western Australia
- New South Wales
- South Australia
- Northern Territory
- Country & Regional
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Cycling Brands
- Malvern Star
- Custom Builders
- Generic Carbon
Who is online
Users browsing this forum: No registered users