Australian Cycling Forums - Bicycles Network Australia

whats a specific brand section without a gallery!

My recent acquisition, some tweaks shortly.

2009 SLC01 Pro Machine

Team Machine

How are the framesets holding up too please people? They're the only branded frames I'm interested in, so how have the owners found them?

2010 slc01, pro machine.

Better looking, lighter, better ride and less maintenance than Kate moss !

GYPSY wrote:

Team Machine

Yummy! Not even the lack of a blue laundry basket can spoil that.

The 2nd Womble wrote:How are the framesets holding up too please people? They're the only branded frames I'm interested in, so how have the owners found them?

I bought a 2011 RM01 frameset from Elite Racing Cycles in Perth and built it with DA (as I preferred that to SRAM). Holding up pretty darn good. It's my "good" bike not my commuter so have only done a couple of 1000km on it. Fantastic handling and responsiveness, you never hear a bad word about the RM01 or SLR01 geometry (which are the same). The RM01 is a little bit too stiff for my liking as a sub 70kg rider but it's fine up to four hours which is the most I usually do.

The proprietary seatpost on the 2011's is a pain as it didn't have enough setback for me, but in the 2012 range they have a choice of setback options. I retro-fitted a 2012 seatpost with the 15mm setback.

I would have been able to buy a BMC to post here but apparently it was 'spam' .

jk

The 2nd Womble wrote:How are the framesets holding up too please people? They're the only branded frames I'm interested in, so how have the owners found them?

see viewtopic.php?f=34&t=52413

gorgeous fresh

i always wondered why the 2011+ top end frames dont have internal routing, is it a weight thing or more of an efficiency thing? ie less cable drag etc.

in my eyes internal routing would complete the look of the higher end BMCs.

Slc01 has internal cable routing.

2010 BMC SLC01 with SRAM Red

Mean looking bike there JV911.
Very nice.

new shoes

heres a photo of my tt bike not the best photo but you get the idea

2011 RM01 with DA/Ultegra build and 2012 15mm setback seatpost.

^ lovin the black vs white bidon cages

did you get that locally iKM ?

Certainly did. 2012 RM01 with SRAM Red at ~7kg. Picked it up From Elite Racing Cycles and couldn't be happier with it.

I think Woodvale BF can do them (would have been less travel for me) but didn't have any in stock and I wanted to ride it before spending the $ and this was right there ready and waiting for me.

Are you getting yourself another?

i wish

'08 SLC01 Promachine / Campy Record / Fulcrum R3s

Is there such a thing as a bad looking BMC?

Oh how I wished I owned one!

i has the TEAM MACHINE