Shimano I-spec XT

Shimano I-spec XT

Postby m@ » Thu Dec 20, 2012 4:16 pm

I'm thinking of grabbing a set of shifter covers to convert my XT shifters to I-spec, mainly just because I can...

I assume that the relative angle of the brake and shift levers can't be adjusted using the I-spec mount; at present my brake and shifter clamp bolts are parallel so hopefully not an issue but I'm wondering whether they allow enough lateral movement to run a one-finger braking setup? At present I'm running the brake levers about 1cm inboard of shifters (i.e. one cm of bar showing between the two clamps), anyone using I-spec and care to comment?
There are four phases of bicycle commuting; first there's fear, then rage, then self-righteousness and finally, fun.
-Yehuda Moon
User avatar
m@
Super Mod
Super Mod
 
Posts: 4288
Joined: Tue Apr 15, 2008 12:20 pm
Location: Northlandia

Return to Shimano

Who is online

Users browsing this forum: No registered users



Support BNA
Click for online shops
Torpedo 7 Torpedo7 AU
Ground Effect Ground Effect NZ
Chain Reaction Cycles CRC UK
Wiggle Wiggle UK
Cycling Express Cycling Express
Ebay Ebay AU
ProBikeKit ProBikeKit UK
Evans Cycles Evans Cycles UK
JensonUSA Jenson USA
JensonUSA Competitive Cyclist