Ultegra 11spd
- singlespeedscott
- Posts: 5510
- Joined: Sun Jan 20, 2008 4:35 pm
- Location: Elimbah, Queensland
Re: Ultegra 11spd
Postby singlespeedscott » Wed May 01, 2013 3:49 pm
Such a great design that SRAM even copied it.
- Xplora
- Posts: 8272
- Joined: Sat Dec 11, 2010 12:33 am
- Location: TL;DR
Re: Ultegra 11spd
Postby Xplora » Wed May 01, 2013 4:41 pm
- DavidTomic
- Posts: 421
- Joined: Thu Dec 29, 2011 9:49 pm
- Location: Caroline Springs, VIC
Re: Ultegra 11spd
Postby DavidTomic » Sat May 11, 2013 9:48 am
I'm (very) slowly building up a new frameset at the moment, and now I'm torn on what to do with the groupset!
- Xplora
- Posts: 8272
- Joined: Sat Dec 11, 2010 12:33 am
- Location: TL;DR
Re: Ultegra 11spd
Postby Xplora » Sat May 11, 2013 1:51 pm
- HAKS
- Posts: 2348
- Joined: Sun Apr 06, 2008 10:28 pm
- Location: Canberra, AUS
Re: Ultegra 11spd
Postby HAKS » Sat May 11, 2013 10:48 pm
If the new mechanical Ultegra is slated for Sep release i'd guess Di2 will follow a month or two later. I'm sure Shimano are trying to get it out on 2014 bikes but as with the new Dura ace I suspect the first bikes with it on them won't hit our shores till early 2014.DavidTomic wrote:I don't normally pay a lot of attention to product cycles etc, so I'm just wondering if anybody has an educated guess/opinion on when we might be likely to see a revised Ultegra Di2 system?
I'm (very) slowly building up a new frameset at the moment, and now I'm torn on what to do with the groupset!
- Duck!
- Expert
- Posts: 9858
- Joined: Tue May 21, 2013 8:21 pm
- Location: On The Tools
Re: Ultegra turns it up to 11
Postby Duck! » Wed May 22, 2013 8:29 pm
I haven't ridden DA 9000, but built a few bikes with it, and it's vastly superior to 7900 (which along with its 6700 & 5700 derivatives is definitely a backward step from its predecessor). It's reasonable to expect, given Shimano's history of trickling down through the groupsets, that 6800 will be a very similar jump in the right direction.Ross wrote:It is pretty average actually, as is DA 7900. DA 7800 is streets ahead of both, haven't ridden with DA 9000 to compare.Marty Moose wrote:Gee the previous Ultegra must have been a really poor groupset in order to get such improvements on the new one. Shame on you Shimano for releasing 6700 obviously a second rate effort hope the designers were sacked.
Marketing
MM
(My roadie is specced with 6600 Ultegra, and that too is a heap smoother than 7900/6700/5700).
-
- Posts: 12172
- Joined: Thu Feb 24, 2011 3:40 pm
- Location: Brisbane
Re: Ultegra 11spd
Postby jasonc » Fri Jun 14, 2013 10:30 am
- Xplora
- Posts: 8272
- Joined: Sat Dec 11, 2010 12:33 am
- Location: TL;DR
-
- Posts: 12172
- Joined: Thu Feb 24, 2011 3:40 pm
- Location: Brisbane
Re: Ultegra 11spd
Postby jasonc » Sat Jun 15, 2013 6:23 am
not the di2 kit thoughXplora wrote:Thunderbirds are GO
- Xplora
- Posts: 8272
- Joined: Sat Dec 11, 2010 12:33 am
- Location: TL;DR
Re: Ultegra 11spd
Postby Xplora » Sat Jun 15, 2013 1:31 pm
-
- Posts: 12172
- Joined: Thu Feb 24, 2011 3:40 pm
- Location: Brisbane
Re: Ultegra 11spd
Postby jasonc » Sat Jun 15, 2013 2:14 pm
Xplora wrote:And they don't have hydro brakes or a compact or...
i've been umming and ahhing. I've decided I don't really want hydro at the moment
don't need a compact
but geez it's heavy
- HAKS
- Posts: 2348
- Joined: Sun Apr 06, 2008 10:28 pm
- Location: Canberra, AUS
Re: Ultegra 11spd
Postby HAKS » Sat Jun 15, 2013 5:34 pm
Has di2 even been announced for 6800?jasonc wrote:not the di2 kit thoughXplora wrote:Thunderbirds are GO
- DavidTomic
- Posts: 421
- Joined: Thu Dec 29, 2011 9:49 pm
- Location: Caroline Springs, VIC
Re: Ultegra 11spd
Postby DavidTomic » Sat Jun 15, 2013 10:14 pm
Not yet .... and it's making me sad!HAKS wrote: Has di2 even been announced for 6800?
- biker jk
- Posts: 7001
- Joined: Tue Nov 17, 2009 6:18 pm
- Location: Sydney
Re: Ultegra 11spd
Postby biker jk » Sat Jun 15, 2013 10:21 pm
Ultegra 6800 compact is available.Xplora wrote:And they don't have hydro brakes or a compact or...
http://www.bike24.com/1.php?content=8;n ... pgc=8:2721
- ozdavo
- Posts: 997
- Joined: Mon Jul 25, 2011 12:03 pm
- Location: Gold Coast (nth)
Re: Ultegra 11spd
Postby ozdavo » Sun Jun 16, 2013 1:27 pm
Not sure about announced, but it has been shown, see images on post 1.HAKS wrote:Has di2 even been announced for 6800?jasonc wrote:not the di2 kit thoughXplora wrote:Thunderbirds are GO
Sent from my iThingy using Tapatalk
- HAKS
- Posts: 2348
- Joined: Sun Apr 06, 2008 10:28 pm
- Location: Canberra, AUS
Re: Ultegra 11spd
Postby HAKS » Sun Jun 16, 2013 6:49 pm
ozdavo wrote: Not sure about announced, but it has been shown, see images on post 1
Nice spot. I do remember seeing them now when I posted
- HAKS
- Posts: 2348
- Joined: Sun Apr 06, 2008 10:28 pm
- Location: Canberra, AUS
Re: Ultegra 11spd
Postby HAKS » Fri Jun 21, 2013 6:08 pm
- Xplora
- Posts: 8272
- Joined: Sat Dec 11, 2010 12:33 am
- Location: TL;DR
Re: Ultegra 11spd
Postby Xplora » Fri Jun 21, 2013 9:34 pm
- brett.hooker
- Posts: 467
- Joined: Sun Sep 09, 2012 5:52 pm
Re: Ultegra 11spd
Postby brett.hooker » Fri Jun 21, 2013 10:11 pm
- Sven Nijs
- Posts: 401
- Joined: Sat Jan 09, 2010 9:24 am
- Location: Sunny Sydney
Re: Ultegra 11spd
Postby Sven Nijs » Sun Jun 30, 2013 9:43 pm
http://www.bikeradar.com/road/news/arti ... ook-37758/" onclick="window.open(this.href);return false;ozdavo wrote:Not sure about announced, but it has been shown, see images on post 1.
- HAKS
- Posts: 2348
- Joined: Sun Apr 06, 2008 10:28 pm
- Location: Canberra, AUS
Re: Ultegra 11spd
Postby HAKS » Mon Jul 01, 2013 12:00 am
press embargo expired today so expect every site to have some coverage over it within hours.Sven Nijs wrote:http://www.bikeradar.com/road/news/arti ... ook-37758/" onclick="window.open(this.href);return false;ozdavo wrote:Not sure about announced, but it has been shown, see images on post 1.
- Duck!
- Expert
- Posts: 9858
- Joined: Tue May 21, 2013 8:21 pm
- Location: On The Tools
Re: Ultegra 11spd
Postby Duck! » Mon Jul 01, 2013 10:10 pm
The "E-Tube" wiring means that they're compatible with all Di2 kits except the original 7970 Dura Ace series.
- DavidTomic
- Posts: 421
- Joined: Thu Dec 29, 2011 9:49 pm
- Location: Caroline Springs, VIC
Re: Ultegra 11spd
Postby DavidTomic » Mon Jul 01, 2013 10:37 pm
I'll be ordering myself a set as soon they start actually hitting the shelves
My poor frame was starting to look a bit sad without any groupset attached!
- Xplora
- Posts: 8272
- Joined: Sat Dec 11, 2010 12:33 am
- Location: TL;DR
Re: Ultegra 11spd
Postby Xplora » Tue Jul 02, 2013 6:57 pm
-
- Posts: 12172
- Joined: Thu Feb 24, 2011 3:40 pm
- Location: Brisbane
Re: Ultegra 11spd
Postby jasonc » Tue Jul 02, 2013 7:46 pm
can I use the 6800 crank with the 6700 derailleur/chain?Xplora wrote:Bike24 has the 6800 compact crank "in stock" maybe for only 250 bucks??? Would definitely solve my "want standard/compact options"
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
Who is online
Users browsing this forum: No registered users
- All times are UTC+11:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.