105 5700 lever reach

105 5700 lever reach

Postby MattyK » Tue Feb 18, 2014 7:36 am

Just got my new bike. In the pack with it was provided some 10mm spacers for the levers. But I want to INCREASE the reach. It looks like there are spacers already installed - are these the 5mm ones mentioned in the documentation? Just want to know before I try to yank them out...
MattyK
 
Posts: 1321
Joined: Fri Oct 01, 2010 1:07 pm
Location: Melbourne

by BNA » Tue Feb 18, 2014 8:03 am

BNA
 

Re: 105 5700 lever reach

Postby Duck! » Tue Feb 18, 2014 8:03 am

Yep, the first-stage chocks are fitted from the factory. Peel the front of the hoods back slightly, unclip the chocks, then pop the hoods back in. Easy. :-)
I had a thought, but it got run over as it crossed my mind.
Duck!
Expert
 
Posts: 1690
Joined: Tue May 21, 2013 8:21 pm
Location: On The Tools

Re: 105 5700 lever reach

Postby GTPilot » Tue Feb 18, 2014 10:17 am

Hey Mattyk.
Wanna sell me the 10mm spacers?
GTPilot
 
Posts: 43
Joined: Sun Jun 09, 2013 10:04 pm

Re: 105 5700 lever reach

Postby MattyK » Tue Feb 18, 2014 11:05 am

Sure, pm me

Thanks duck
MattyK
 
Posts: 1321
Joined: Fri Oct 01, 2010 1:07 pm
Location: Melbourne


Return to Shimano

Who is online

Users browsing this forum: No registered users



Popular Bike Shops
Torpedo 7 Torpedo7 AU
Ground Effect Ground Effect NZ
Chain Reaction Cycles CRC UK
Wiggle Wiggle UK
Ebay Ebay AU



InTouch with BNA
“Bicycles BNA Twitter
“Bicycles BNA Facebook
“Google+ BNA Google+
“Bicycles BNA Newsletter