Cervelo R3 - Cadence Sensor Fit

Cervelo R3 - Cadence Sensor Fit

Postby apples » Wed Nov 21, 2012 11:04 am

I’m looking for ideas for fitting a speed / cadence sensor to my R3.

I’m using the Garmin system and have a GSC10 speed and cadence sensor that I want to fit. The GSC10 has a curved bottom and the R3 stay is a chunky square shape. I can fit the GSC without any issues but it’s not a really clean look so I thought I’d see if the BNA Cervelo brains trust had any better suggestions :)
apples
 
Posts: 2
Joined: Thu Oct 04, 2012 12:44 pm

by BNA » Wed Nov 21, 2012 5:41 pm

BNA
 

Re: Cervelo R3 - Cadence Sensor Fit

Postby Dr_Mutley » Wed Nov 21, 2012 5:41 pm

I have a sensor on my RS which shares the same chainstay... There's no real way of making the ugly sensor look good, hence I don't run one on my S5 (cadence from my quarq, speed from Gps)... I'll post a pic tonight when I get home... Use the rubber base and have arm down...
Image
Dr_Mutley
 
Posts: 2244
Joined: Fri Jan 11, 2008 1:28 pm
Location: Flagstaff Hill, Adelaide SA 5159

Re: Cervelo R3 - Cadence Sensor Fit

Postby Dr_Mutley » Wed Nov 21, 2012 8:50 pm

Dirty bike after wet ride... Sorry

Image

Image
Image
Dr_Mutley
 
Posts: 2244
Joined: Fri Jan 11, 2008 1:28 pm
Location: Flagstaff Hill, Adelaide SA 5159

Re: Cervelo R3 - Cadence Sensor Fit

Postby apples » Thu Nov 22, 2012 12:30 pm

Dirty bike is good - at least it's being used :)
I see you've used some insulating tap under the zip-ties which is a great idea.

I think my R3 stay might even be a little chunkier based on how well your sensor seems to fit. I'll post some pics over the w/end once I've fitted.
apples
 
Posts: 2
Joined: Thu Oct 04, 2012 12:44 pm


Return to Cervélo

Who is online

Users browsing this forum: No registered users



Popular Bike Shops
Wiggle Wiggle UK
Ground Effect Ground Effect NZ
Ebay Ebay AU
Chain Reaction Cycles CRC UK

“Bicycles BNA Twitter
“Bicycles BNA Facebook
“Google+ BNA Google+
“Bicycles BNA Newsletter

> FREE BNA Stickers
> BNA Cycling Kit