Surly vs Soma vs Salsa
- baabaa
- Posts: 1575
- Joined: Sun Apr 19, 2009 8:47 am
Re: Surly vs Soma vs Salsa
Postby baabaa » Wed Dec 07, 2016 9:49 pm
Seems weird as I can swap four different brands of hubs between bikes with maybe just a half a twist of a in line adjuster.
Is the rear axle and skewer snug in the dropouts and opens and closes with ease but then the lever is closed kinda firmish?
-
- Posts: 363
- Joined: Sun Aug 02, 2015 5:51 pm
- Location: Somewhere near Malabugilmah
Re: Surly vs Soma vs Salsa
Postby uad782 » Wed Dec 07, 2016 10:09 pm
Wheel is 29" H Plus Son with 36 spokes. Hub is Shimano XT with standard QR, 135mm (?) and 6 bolt mount. Wheel was built by Craftworks. IS to PM adaptor is supplied by TRP.
I put another wheel and still had the same problem which leads me to believe it is either the adaptor or alternator/frame problem.
I may also cross post this with the technical area if that doesn't break any rules.
- baabaa
- Posts: 1575
- Joined: Sun Apr 19, 2009 8:47 am
Re: Surly vs Soma vs Salsa
Postby baabaa » Wed Dec 07, 2016 10:27 pm
-
- Posts: 363
- Joined: Sun Aug 02, 2015 5:51 pm
- Location: Somewhere near Malabugilmah
- RonK
- Posts: 11508
- Joined: Mon Aug 24, 2009 2:08 pm
- Location: If you need to know, ask me
- Contact:
Re: Surly vs Soma vs Salsa
Postby RonK » Wed Dec 07, 2016 11:20 pm
My only other suggestion would be to make sure you have fitted everything up according to the ALTERNATOR DROPOUT INSTRUCTIONS.
It's my understanding that it's common practice to use shims for IS mount calipers and they come in various thicknesses. I've never heard of anyone doing that with an IS to Post Mount adapter and I'm surprised that the caliper mounting holes don't allow enough lateral adjustment.
But I can't foresee any problem with fitting Disc Brake Caliper Shims under the adapter. And I know it's not a problem to fit the Syntace shims under the disc - I use them myself.
-
- Posts: 363
- Joined: Sun Aug 02, 2015 5:51 pm
- Location: Somewhere near Malabugilmah
Re: Surly vs Soma vs Salsa
Postby uad782 » Thu Dec 08, 2016 6:48 am
I will get some Syntace shims for the short term. I will also double check the dropout instructions which I have been following. I have emailed Salsa.
Maybe it is a storm in a teacup!
- RonK
- Posts: 11508
- Joined: Mon Aug 24, 2009 2:08 pm
- Location: If you need to know, ask me
- Contact:
Re: Surly vs Soma vs Salsa
Postby RonK » Thu Dec 08, 2016 7:08 am
-
- Posts: 363
- Joined: Sun Aug 02, 2015 5:51 pm
- Location: Somewhere near Malabugilmah
Re: Surly vs Soma vs Salsa
Postby uad782 » Thu Dec 08, 2016 7:11 am
- RonK
- Posts: 11508
- Joined: Mon Aug 24, 2009 2:08 pm
- Location: If you need to know, ask me
- Contact:
Re: Surly vs Soma vs Salsa
Postby RonK » Thu Dec 08, 2016 7:23 am
- RonK
- Posts: 11508
- Joined: Mon Aug 24, 2009 2:08 pm
- Location: If you need to know, ask me
- Contact:
Re: Surly vs Soma vs Salsa
Postby RonK » Thu Dec 08, 2016 9:40 am
You should be able to check this by measuring the distance between the alternator plates at the top and bottom bolts.
I'll assemble the standard alternator plate I removed with a spare TRP IS to Post Mount adapter and check the alignment against the Fargo dropout - when I get home tonight.
- baabaa
- Posts: 1575
- Joined: Sun Apr 19, 2009 8:47 am
Re: Surly vs Soma vs Salsa
Postby baabaa » Thu Dec 08, 2016 11:09 am
http://forums.mtbr.com/salsa/
Very dumb question, but you are using the correct size adapter, marked as a 160 with a 160mm rotor and not a 160 with a 180mm rotor...
- RonK
- Posts: 11508
- Joined: Mon Aug 24, 2009 2:08 pm
- Location: If you need to know, ask me
- Contact:
Re: Surly vs Soma vs Salsa
Postby RonK » Thu Dec 08, 2016 7:09 pm
Well - this is confusing to say the least.RonK wrote:The adapter is marked F or R, so you must have the right adapter, and the mark must face out.
I'm looking at a spare TRP IS to PM adapter. It is actually marked F180/R160 on one side, and UP on the other. Looking at it closely it is hard to tell, but there does seem to be a small amount of offset.
According to the Spyke installation instructions, quote: "For IS to PM adapters, hold the adapter so that the stamped “F” or “R” is facing you – away from the bike, rotor and wheel". However if you fit it this then the UP mark would be at the bottom.
So I took a close look at my bike, and I have UP at the top and on the outside, while F180/R160 is at the bottom, inside.
So assuming you have the same adapter, check you have installed this way.
-
- Posts: 363
- Joined: Sun Aug 02, 2015 5:51 pm
- Location: Somewhere near Malabugilmah
Re: Surly vs Soma vs Salsa
Postby uad782 » Thu Dec 08, 2016 9:42 pm
My Spyke instructions are different to yours. They say "For IS or PM adaptors,hold the adapter so the stamped "UP" is oriented upwards". There is no mention of orienting with respect to size label. I have the adapter installed the same way as yours.
Baabaa I believe I am using the correct size adaptor using a F203/R180 for rear 180mm disc.
I have temporarily installed around 1.6mm of washers/shims on the caliper with the brakes now working perfectly. I will order a couple shims for the rotor and move on I think.
I tested the front wheel this evening with everything working perfectly so at least I have had one win.
-
- Posts: 363
- Joined: Sun Aug 02, 2015 5:51 pm
- Location: Somewhere near Malabugilmah
Re: Surly vs Soma vs Salsa
Postby uad782 » Sun Dec 11, 2016 12:16 pm
I swapped the IS-PM mount with a Magura one with the rubbing disappearing. The Magura adaptor is around half a millimetre thicker.
I am after a bit of further advice. I went to route the gear cable and noticed the bike doesn't have downtube cable stops. It has these instead which I think add versatility if you want to use downtube shifters.
Does anyone have any recommendations for cable stops?
Thanks
- RonK
- Posts: 11508
- Joined: Mon Aug 24, 2009 2:08 pm
- Location: If you need to know, ask me
- Contact:
Re: Surly vs Soma vs Salsa
Postby RonK » Sun Dec 11, 2016 12:51 pm
There a any number of them on the web. These CSN Downtube Cable Stops from Ribble are cheap as chips.
-
- Posts: 363
- Joined: Sun Aug 02, 2015 5:51 pm
- Location: Somewhere near Malabugilmah
Re: Surly vs Soma vs Salsa
Postby uad782 » Sun Dec 11, 2016 2:47 pm
They didn't come with my XT groupset as I gather they are more for road bikes. I did google but was wondering if anyone had any suggestions in terms of performance. By the look of it they all perform just as well. I can get dura-ace one sfor $42 or the CSN for $8. I will stick with the CSN!
-
- Posts: 363
- Joined: Sun Aug 02, 2015 5:51 pm
- Location: Somewhere near Malabugilmah
Re: Surly vs Soma vs Salsa
Postby uad782 » Fri Dec 16, 2016 10:02 pm
Just wondering what people think of Ergon gp3 grips? I used to have bar ends in the nineties and miss them
Thanks
- RonK
- Posts: 11508
- Joined: Mon Aug 24, 2009 2:08 pm
- Location: If you need to know, ask me
- Contact:
Re: Surly vs Soma vs Salsa
Postby RonK » Fri Dec 16, 2016 10:36 pm
- Wingnut
- Posts: 883
- Joined: Sat Sep 05, 2009 11:01 pm
- Location: Mornington Peninsula...
Re: Surly vs Soma vs Salsa
Postby Wingnut » Sun Dec 18, 2016 1:50 pm
I went the cork version without the bar ends...loved them, so good but I've now gone to drop bars on my Surly...uad782 wrote:Hi
Just wondering what people think of Ergon gp3 grips? I used to have bar ends in the nineties and miss them
Thanks
-
- Posts: 363
- Joined: Sun Aug 02, 2015 5:51 pm
- Location: Somewhere near Malabugilmah
Re: Surly vs Soma vs Salsa
Postby uad782 » Mon Dec 26, 2016 5:31 pm
A few more questions/comments if I may. Build is going well. Comments:
[*] To solve the rear brake alignment issue I butchered some ring terminals and placed them as thin shims on the calliper side.
[*] I am uncertain if I have the cockpit set up. Photos below with any comments appreciated. On my MTB's the bar are riser bars. The Salsa ones don't appear to be riser bars.
[*] I am uncertain about what seatpost to get. Should I get a setback one or not. I hear that a setback one is better with a Brooks saddle. My MTB's seem to use a cheap FSA seatpost that is sort of set back.
[*] I am having trouble getting an Alternator Low Rider rear rack. Most of the web shops don't sell them or postage is a killer. I have emailed details to LBS twice after talking to them. They say they forgot and to email details again.
[*] The Spyke brakes had a lot of play between the calipers and rotor so I adjusted them using the adjusters on the side. The only one pad that didn't need adjusting was the rear rotor side pad.
Thanks again.
A rough photo showing setback(?) on one of my MTB's
- RonK
- Posts: 11508
- Joined: Mon Aug 24, 2009 2:08 pm
- Location: If you need to know, ask me
- Contact:
Re: Surly vs Soma vs Salsa
Postby RonK » Mon Dec 26, 2016 7:41 pm
Brooks saddles have very short rails, i.e. not much range of adjustment. So it's important to choose the right seat post, but a setback post is not automatically the best choice. I'm using a setback post on the Fargo, but it has a very short reach. The Marrakesh is a more conventional frame and the reach is longer.
My guess is a straight seat post would likely be the better option - but why don't you borrow the seat post from your MTB and try the fit. A Thomson Elite is a good middle of the road seat post and would be in keeping with the quality of the other components you have selected.
I bought a Tubus Vega Classic for the Fargo. The 26"/28" version is 50mm taller than the Alternator Low Rider. It doesn't look ridiculously tall on the Fargo, but then I use 42mm or larger tyres. If you decide to fit a Tubus rack you will also need to get a Salsa Lower Mount Kit.
However the standard Alternator rack is only 20mm taller and probably wouldn't be very noticeable, so if you can't get a low rider I think the standard rack would be ok.
Yeah, I adjusted the pads on my Spyres too - it improved the feel greatly.
-
- Posts: 363
- Joined: Sun Aug 02, 2015 5:51 pm
- Location: Somewhere near Malabugilmah
Re: Surly vs Soma vs Salsa
Postby uad782 » Mon Dec 26, 2016 9:38 pm
With your tubus rack, did you have to widen the legs much to get it to fit the alternator dropouts? I would prefer a tubus rack over salsa but the alternator dropouts are so wide. BTW I already have a rack mounting kit which I got from bike24.
The std alternator specs says it only supports 15 kg while the low rider supports 27 kg. We have already discussed this and I am really surprised to find such a difference. They appear to be both made of the same material. I don't think that this difference is possible.
Also any suggestions for a front rack? I gather it doesn't need to be salsa. I have an old Blackburn low rider which has served me well.
- RonK
- Posts: 11508
- Joined: Mon Aug 24, 2009 2:08 pm
- Location: If you need to know, ask me
- Contact:
Re: Surly vs Soma vs Salsa
Postby RonK » Mon Dec 26, 2016 10:31 pm
Actually on my tourer I have a matching stainless steel Nova/Cosmo combination - the Nova was the stainless steel version of the Ergo but unfortunately it has been discontinued.
I think an Ergo/Logo Classic would be a good combination. If you look at the 26"/28" Logo Classic dimension drawing you will see that the allowed width at the dropouts is 180mm. The Logo Classic is the same design as the Vega Classic I have, but with the lowrider rails added.
Measure the width of the dropouts at the top bolt - on the Fargo it is 182mm. So I would have no hesitation in fitting a Tubus rack. Make sure you get the classic though - the Evo mount is only allowed 170mm dropout spacing.
I can't think of any reason for the different load ratings on the Salsa racks. It doesn't much matter anyway I think - to me it would make no sense to carry more than 15 kg on the rear rack.
-
- Posts: 363
- Joined: Sun Aug 02, 2015 5:51 pm
- Location: Somewhere near Malabugilmah
Re: Surly vs Soma vs Salsa
Postby uad782 » Wed Jan 04, 2017 11:09 am
The previous Salsa distributor only took 10 days to get me my Salsa frame.
I will definitely be buying offshore now.
-
- Posts: 363
- Joined: Sun Aug 02, 2015 5:51 pm
- Location: Somewhere near Malabugilmah
Re: Surly vs Soma vs Salsa
Postby uad782 » Wed Jan 04, 2017 7:04 pm
In case anyone is interested here is the final build of the Marrakesh. It just needs some racks.
It shifts sooooo smoothly! It also rides the fastest of any of my mountain bikes. I have never had such a speedy bike.
Thanks for everyone's input (esp RonK!)
Return to “Touring Bikes and Equipment”
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
Who is online
Users browsing this forum: No registered users
- All times are UTC+10:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.