Azzurri's are tough
-
- Posts: 14315
- Joined: Wed Jul 25, 2012 4:40 pm
- Location: Bendigo
Azzurri's are tough
Postby warthog1 » Thu Dec 06, 2012 9:42 pm
-
- Posts: 1152
- Joined: Thu Oct 23, 2008 5:02 am
- Location: Spearwood, WA
Re: Azzurri's are tough
Postby just4tehhalibut » Fri Dec 28, 2012 2:09 am
Of course these days the Primo is not alloy with carbon stays but wholly carbon. Hopefully Azzurri have still got that performance and handling dialled in.
-
- Posts: 10322
- Joined: Thu Sep 18, 2008 12:10 pm
- Location: Sydney
Re: Azzurri's are tough
Postby Nobody » Fri Dec 28, 2012 9:01 am
Didn't you say it's flexy compared with the S5? Could it be that the extra distance has made a difference to the carbon stays?warthog1 wrote:The mighty Primo has done upwards of 40k I reckon, has been crashed several times, and outlived a few wheels. Old photo, now has 6700 shifters, still going strong.
-
- Posts: 10322
- Joined: Thu Sep 18, 2008 12:10 pm
- Location: Sydney
Re: Azzurri's are tough
Postby Nobody » Fri Dec 28, 2012 9:06 am
Can you get a Helicoil kit (or similar repair kit) for it? Otherwise Gripsport should know how to fix it, if it really matters.just4tehhalibut wrote:...the thread on the righthand side of the bottom bracket gave way, rendering the bike useless.
-
- Posts: 14315
- Joined: Wed Jul 25, 2012 4:40 pm
- Location: Bendigo
Re: Azzurri's are tough
Postby warthog1 » Tue Jan 01, 2013 3:26 pm
Yes it is flexy compared to the Cervelo which is faster everywhere. Its been strong for me though and has been a good bike especially considering it was fairly cheap. Still my daily commute and the bike I would take on a long ride as it has a softer ride than the Cervelo, probably due to the flexy seat stays. Steers a bit slower too so a bit less nervous on descents.Nobody wrote:Didn't you say it's flexy compared with the S5? Could it be that the extra distance has made a difference to the carbon stays?
-
- Posts: 14315
- Joined: Wed Jul 25, 2012 4:40 pm
- Location: Bendigo
Re: Azzurri's are tough
Postby warthog1 » Tue Jan 01, 2013 3:29 pm
Sorry to hear that.just4tehhalibut wrote:Didn't quite work out the same for me, I have the same model in colour and alloy/carbon construction (from 2006) and it lasted only a year before the thread on the righthand side of the bottom bracket gave way, rendering the bike useless. And half that year was off the bike because of sudden hospitalisation ex bike (No one ever expects the hospitalisation). It was a quick bike but I had to be aware of pedal overlap. It rode well, especially in the hills of Adelaide so I've kept the frame hoping for some way to resurrect it. Overall was a very good value, quality bike for its day.
Of course these days the Primo is not alloy with carbon stays but wholly carbon. Hopefully Azzurri have still got that performance and handling dialled in.
My bb threads have been good as I have had the bearing cups out several times and replaced once, searching for a creak that turned out to be a rear hub and loose pedals
-
- Posts: 14315
- Joined: Wed Jul 25, 2012 4:40 pm
- Location: Bendigo
Re: Azzurri's are tough
Postby warthog1 » Sun Mar 31, 2013 3:26 pm
Badly cracked drive side chain stay. The frame is kaput.
On the look out for a cheapish but durable road frame with mudguard lugs. I'll swap the bits off the primo on to it.
-
- Posts: 10322
- Joined: Thu Sep 18, 2008 12:10 pm
- Location: Sydney
Re: Azzurri's are tough
Postby Nobody » Sun Mar 31, 2013 4:12 pm
Oh, this is priceless!warthog1 wrote:Oops, Azzurri's are not so tough.
Badly cracked drive side chain stay. The frame is kaput.
It's Al, it was only a matter of time and Kms. Just expected a bit more time than a few months before getting to gloat.
TLL and Twizzle have had good experiences so far with the Ribble framesets which are cheap. Because most people don't do a lot of Kms on their bikes, you should fare well with a secondhand frameset. Both my Al frames are secondhand.warthog1 wrote:On the look out for a cheapish but durable road frame with mudguard lugs. I'll swap the bits off the primo on to it.
Of course if you want to have a frame for 20 years, then get a heavy duty steel one. But somehow I think you're too much of a WW to own durable stuff.
If the Surly CC ever cracks and I'm still alive on these forums, I'll let you know.
-
- Posts: 1545
- Joined: Wed Sep 26, 2012 11:05 pm
- Location: West Gippy
Re: Azzurri's are tough
Postby macca33 » Sun Mar 31, 2013 5:38 pm
cheers
-
- Posts: 14315
- Joined: Wed Jul 25, 2012 4:40 pm
- Location: Bendigo
Re: Azzurri's are tough
Postby warthog1 » Sun Mar 31, 2013 8:02 pm
That is mighty generous of you Macca thanks very much, what a good bloke you must be:)macca33 wrote:What frame size do you ride and where are you? I could help you out with a 60cm 2008 Trek 1.9 frameset - happy to donate same, if you are in / near Melbourne. It does have some mounting lugs on it.
cheers
I'm in Bendigo so that is pretty close by, but the frame is a bit big for me. I'm after a 56-57cm tt.
As per Nobody I reckon I'm onto a steel ribble frame that is pretty cheap and I can mudguard up.
-
- Posts: 14315
- Joined: Wed Jul 25, 2012 4:40 pm
- Location: Bendigo
Re: Azzurri's are tough
Postby warthog1 » Sun Mar 31, 2013 8:21 pm
You are a nasty man NobodyNobody wrote:Oh, this is priceless!warthog1 wrote:Oops, Azzurri's are not so tough.
Badly cracked drive side chain stay. The frame is kaput.
It's Al, it was only a matter of time and Kms. Just expected a bit more time than a few months before getting to gloat.
TLL and Twizzle have had good experiences so far with the Ribble framesets which are cheap. Because most people don't do a lot of Kms on their bikes, you should fare well with a secondhand frameset. Both my Al frames are secondhand.warthog1 wrote:On the look out for a cheapish but durable road frame with mudguard lugs. I'll swap the bits off the primo on to it.
Of course if you want to have a frame for 20 years, then get a heavy duty steel one. But somehow I think you're too much of a WW to own durable stuff.
If the Surly CC ever cracks and I'm still alive on these forums, I'll let you know.
The frame is not that light so I figured it would keep on keeping on. Oh well at least it wasn't the carbon that failed .
This Ribble audax frame looks the go thus far.
- ldrcycles
- Posts: 9594
- Joined: Thu Oct 28, 2010 3:19 pm
- Location: Kin Kin, Queensland
Re: Azzurri's are tough
Postby ldrcycles » Sun Mar 31, 2013 8:42 pm
-
- Posts: 10322
- Joined: Thu Sep 18, 2008 12:10 pm
- Location: Sydney
Re: Azzurri's are tough
Postby Nobody » Sun Mar 31, 2013 9:25 pm
Yes, I know.warthog1 wrote:You are a nasty man Nobody
When I was doing windsurfing, people on those forums would say low grade carbon goes more flexy and high grade carbon cracks. I suppose that's why your bike went the flexy way. Discerning cyclists might say that the carbon part has been dead for a while.warthog1 wrote:The frame is not that light so I figured it would keep on keeping on. Oh well at least it wasn't the carbon that failed .
You can see the geometries for these frames in the "Bike Builder" section. Unfortunately the 525 isn't in there. But it might give you an idea. I suppose you can e-mail Ribble and ask for the geometry chart.warthog1 wrote:This Ribble audax frame looks the go thus far.
Of course I would get the 525, but I think both TLL and Twizzle have the 7005 Audax/Winter frames. How Ribble do either for the money is amazing. Rather than get their supplied fork, this might be a good time to do a disc conversion if you can spare the money.
-
- Posts: 14315
- Joined: Wed Jul 25, 2012 4:40 pm
- Location: Bendigo
Re: Azzurri's are tough
Postby warthog1 » Sun Mar 31, 2013 10:23 pm
Hopefully I can use the fork off the Azzurri until the funds are allowed, but that is the cunning plan at this stage.Nobody wrote:
Of course I would get the 525, but I think both TLL and Twizzle have the 7005 Audax/Winter frames. How Ribble do either for the money is amazing. Rather than get their supplied fork, this might be a good time to do a disc conversion if you can spare the money.
-
- Posts: 14315
- Joined: Wed Jul 25, 2012 4:40 pm
- Location: Bendigo
Re: Azzurri's are tough
Postby warthog1 » Sun Mar 31, 2013 10:26 pm
Last couple of commutes there has been an odd pinging sound occasionally. I just thought it was a spoke in the cheap rear wheel.ldrcycles wrote: aww so no crabon crash pron lol. It's a decent sized crack, did you just find it when cleaning the bike or was there a noise or movement?
I went to wipe and relube the chain this arvo and saw a black line that wouldn't wipe away.
- twizzle
- Posts: 6402
- Joined: Wed Aug 13, 2008 11:45 am
- Location: Highlands of Wales.
Re: Azzurri's are tough
Postby twizzle » Sun Mar 31, 2013 10:50 pm
Alloy steerer on the fork? Probably a good time to put it out to pasture as well.warthog1 wrote:Hopefully I can use the fork off the Azzurri until the funds are allowed, but that is the cunning plan at this stage.Nobody wrote:
Of course I would get the 525, but I think both TLL and Twizzle have the 7005 Audax/Winter frames. How Ribble do either for the money is amazing. Rather than get their supplied fork, this might be a good time to do a disc conversion if you can spare the money.
Sent from my iThingy...
-
- Posts: 444
- Joined: Tue Feb 07, 2012 3:48 pm
Re: Azzurri's are tough
Postby Jesmol » Sun Mar 31, 2013 11:06 pm
-
- Posts: 14315
- Joined: Wed Jul 25, 2012 4:40 pm
- Location: Bendigo
Re: Azzurri's are tough
Postby warthog1 » Mon Apr 01, 2013 12:26 am
twizzle wrote: Alloy steerer on the fork? Probably a good time to put it out to pasture as well.
Yes it is an alloy steerer and I'll have a good look at it when I strip the frame. You are probably right, I have some good descents on my commute, a broken steerer would not be good. The Azzurri fork wouldn't be there long.
I plan to put a front disc fork on eventually so will just be a stop gap until the funds allow.
-
- Posts: 14315
- Joined: Wed Jul 25, 2012 4:40 pm
- Location: Bendigo
Re: Azzurri's are tough
Postby warthog1 » Mon Apr 01, 2013 12:30 am
Thanks mate .Jesmol wrote:I have a Ribble Ultralite to offload if you need it, have both the original fork and a Merida fork with carbon steerer for it too
Nobody is right I am a weight weenie, but I'm going heavier and stronger with the next frame as it will be an all weather commuter primarily.
The steel Ribble frame looks the go at this stage.
-
- Posts: 14315
- Joined: Wed Jul 25, 2012 4:40 pm
- Location: Bendigo
Re: Azzurri's are tough
Postby warthog1 » Mon Apr 01, 2013 12:39 am
This is me commuting at the moment (thanks Nobody). Only mine is a P2 and I'm not using a disc.
Did the 42k long commute in for night shift tonight. Shitzen but it is fast compared to the Azzurri
Same commute the day before on the Azzurri was 10 minutes slower. Same effort, fairly hard but not flat out, same load in back pack both times.
My Garmin shows times for 5k segments and the the Cervelo was even quicker on one that is predominantly uphill, dont know how that works
Maybe I should just turn the P2 into a commuter, bit hard to mount everything though.
- ldrcycles
- Posts: 9594
- Joined: Thu Oct 28, 2010 3:19 pm
- Location: Kin Kin, Queensland
Re: Azzurri's are tough
Postby ldrcycles » Mon Apr 01, 2013 12:49 am
-
- Posts: 14315
- Joined: Wed Jul 25, 2012 4:40 pm
- Location: Bendigo
Re: Azzurri's are tough
Postby warthog1 » Mon Apr 01, 2013 9:50 am
-
- Posts: 10322
- Joined: Thu Sep 18, 2008 12:10 pm
- Location: Sydney
Re: Azzurri's are tough
Postby Nobody » Tue Apr 02, 2013 3:31 pm
Got any dents or nicks from chain suck on that frame? Appears to be a common point of failure going by the link below.warthog1 wrote:Oops, Azzurri's are not so tough.
Badly cracked drive side chain stay. The frame is kaput.
On the look out for a cheapish but durable road frame with mudguard lugs. I'll swap the bits off the primo on to it.
http://www.m-gineering.nl/oopsg.htm" onclick="window.open(this.href);return false;
-
- Posts: 14315
- Joined: Wed Jul 25, 2012 4:40 pm
- Location: Bendigo
Re: Azzurri's are tough
Postby warthog1 » Tue Apr 02, 2013 7:17 pm
Nobody wrote:Got any dents or nicks from chain suck on that frame? Appears to be a common point of failure going by the link below.
http://www.m-gineering.nl/oopsg.htm" onclick="window.open(this.href);return false;
No, I reckon it started from the weld at the bridge between the chain stays. There is a white frame with a less advanced crack at the same point in your link.
Return to “General Cycling Discussion”
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
Who is online
Users browsing this forum: jasonc
- All times are UTC+11:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.