Hey People,
I am a commuter and a fitness rider, I'm waiting on a brand new bike to be shipped in and as the last time I spent money on a bike, I had it stolen - I want to take every precaution possible.
What are the best types of locks? U-locks? Chains? Cables?
Are there any brands which come with a guarantee of sorts, or perhaps some reputable strong brands?
I don't want to spend all this money on a bike, only to have it stolen on me again.
Hardy Bike Locks?
- bikesnotbombs
- Posts: 16
- Joined: Sat Mar 10, 2007 11:43 am
- Location: Newcastle, NSW, Australia
- Bnej
- Posts: 2880
- Joined: Fri Jun 30, 2006 11:43 pm
- Location: Katoomba, NSW
Postby Bnej » Tue Mar 20, 2007 12:55 pm
You want a Kryptonite, ABUS or similar heavy U-Lock.
Not all U-Locks are equal. The better ones will win easily vs portable bolt cutters (cutter blades will lose and be mangled), and will take forever to saw through. Spend $60 or more, don't buy one from K-Mart for $20.
You can find use for a long cable too, to put through your seat rails, wheels, etc. Makes it just a bit harder, as they'd need a hacksaw and time to cut your U lock and bolt cutters and a knife for the cable.
Park it in a place where there is either limited access, or where there is a lot of passing pedestrians. Make sure your anchor point is secure and they can't, eg, just pull the street sign out of the socket and take the bike with locks attached. You want any prospective thief to have to spend a good length of time in public view to get through your locks.
Not all U-Locks are equal. The better ones will win easily vs portable bolt cutters (cutter blades will lose and be mangled), and will take forever to saw through. Spend $60 or more, don't buy one from K-Mart for $20.
You can find use for a long cable too, to put through your seat rails, wheels, etc. Makes it just a bit harder, as they'd need a hacksaw and time to cut your U lock and bolt cutters and a knife for the cable.
Park it in a place where there is either limited access, or where there is a lot of passing pedestrians. Make sure your anchor point is secure and they can't, eg, just pull the street sign out of the socket and take the bike with locks attached. You want any prospective thief to have to spend a good length of time in public view to get through your locks.
Last edited by Bnej on Tue Mar 20, 2007 12:59 pm, edited 1 time in total.
- sogood
- Posts: 17168
- Joined: Thu Aug 31, 2006 7:31 am
- Location: Sydney AU
Postby sogood » Tue Mar 20, 2007 12:56 pm
Guarantee = Insurance money.
Based on what I found, security equates to weight. And it's just that bit annoying to pay extra to save weight on the bike and then pay big bucks for a heavy lock.
ABUS is a German company and its products have received very good reviews, especially their top end models with security rating of 8-9/10.
http://www.abus.de/
The common recommendation is to use a U-lock to go through the seatpost/rear wheel and the bike post. and then use a thick cable to loop through the front wheel and other components eg. saddle. Skewers with proprietary non-quick release security nut is also highly recommended.
I note that Cheeky Monkey in Newtown (Sydney) stock these when I last visited.
Based on what I found, security equates to weight. And it's just that bit annoying to pay extra to save weight on the bike and then pay big bucks for a heavy lock.
ABUS is a German company and its products have received very good reviews, especially their top end models with security rating of 8-9/10.
http://www.abus.de/
The common recommendation is to use a U-lock to go through the seatpost/rear wheel and the bike post. and then use a thick cable to loop through the front wheel and other components eg. saddle. Skewers with proprietary non-quick release security nut is also highly recommended.
I note that Cheeky Monkey in Newtown (Sydney) stock these when I last visited.
Bianchi, Ridley, Tern, Montague and All things Apple
RK wrote:And that is Wikipedia - I can write my own definition.
- bikesnotbombs
- Posts: 16
- Joined: Sat Mar 10, 2007 11:43 am
- Location: Newcastle, NSW, Australia
Postby bikesnotbombs » Tue Mar 20, 2007 1:08 pm
Thankyou for the prompt response!
All of you have been extraordinary in providing me with exactly what I wanted to know.
As far as weight is concerned, that's not a problem. The primary use of this lock will be for my daily commute, to University, and I have to carry a fair load anyway. A couple of kgs is not going to make much of a difference to me, if it means my bike will be there when I finish class!
I'll take a trip down to my LBS and tell them my basic desires, and what I now know to avoid (cheap locks)!
All of you have been extraordinary in providing me with exactly what I wanted to know.
As far as weight is concerned, that's not a problem. The primary use of this lock will be for my daily commute, to University, and I have to carry a fair load anyway. A couple of kgs is not going to make much of a difference to me, if it means my bike will be there when I finish class!
I'll take a trip down to my LBS and tell them my basic desires, and what I now know to avoid (cheap locks)!
- bikesnotbombs
- Posts: 16
- Joined: Sat Mar 10, 2007 11:43 am
- Location: Newcastle, NSW, Australia
Postby bikesnotbombs » Tue Mar 20, 2007 1:26 pm
Trek 7.0 FX. It suited my requirements, fell within my uni student budget and felt better than others I had tried.
- sogood
- Posts: 17168
- Joined: Thu Aug 31, 2006 7:31 am
- Location: Sydney AU
- bikesnotbombs
- Posts: 16
- Joined: Sat Mar 10, 2007 11:43 am
- Location: Newcastle, NSW, Australia
Postby bikesnotbombs » Tue Mar 20, 2007 1:41 pm
I'd rather buy a top end lock and not have to rebuy my entire bike, which I have worked hard to customise to my needs.
-
- Posts: 1818
- Joined: Thu Sep 28, 2006 8:38 pm
- Location: Warrnambool
Postby stryker84 » Tue Mar 20, 2007 2:30 pm
heh, i got a fairly hefty cable lock with my first bike, it almost made it thru the 1st month, before i walked downstairs and found the bike wasn't where i perked it
therefore, from experience, go with a good U-lock. even the hardiest cable will lose against a good pair of bolt cutters.
therefore, from experience, go with a good U-lock. even the hardiest cable will lose against a good pair of bolt cutters.
- sogood
- Posts: 17168
- Joined: Thu Aug 31, 2006 7:31 am
- Location: Sydney AU
Postby sogood » Tue Mar 20, 2007 3:34 pm
Once the bike store manager told me that the strongest cable is stainless steel from boating supplies. So I went over and found the thickest cable they had. After telling the store owner of my intended use, he told me to forget it, as a hand cutter they had in the store could easily cut it in no time.stryker84 wrote:therefore, from experience, go with a good U-lock. even the hardiest cable will lose against a good pair of bolt cutters.
Bianchi, Ridley, Tern, Montague and All things Apple
RK wrote:And that is Wikipedia - I can write my own definition.
- mikesbytes
- Super Mod
- Posts: 22164
- Joined: Thu Dec 01, 2005 11:42 pm
- Location: Tempe, Sydney
- Contact:
Return to “Buying a bike / parts”
Jump to
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
Who is online
Users browsing this forum: No registered users
- All times are UTC+11:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
Brought to you by Bicycles Network Australia | © 1999 - 2024 | Powered by phpBB ®
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.