speedplay keep on kovers

Questions about purchasing bicycles and parts

Re: speedplay keep on kovers

Postby Dr_Mutley » Mon Jan 14, 2013 5:27 pm

twizzle wrote:Never had a problem with the springs, in fact on a couple of occasions I re-used the old springs so I didn't have to put up with the 'bedding in' time (they clip easier when the edges of the spring are rounded off).

Wear is quite a problem if u use zeros, and have them adjusted to allow no float. After 5000km or so the no float ends up sloppy, with a combination of both rotational float, and rocking (instability) due to wear of the spring. Not really much of an issue to those who run a fair degree off float however..,
Last edited by Dr_Mutley on Mon Jan 14, 2013 10:59 pm, edited 1 time in total.
Posts: 2277
Joined: Fri Jan 11, 2008 1:28 pm
Location: Flagstaff Hill, Adelaide SA 5159

by BNA » Mon Jan 14, 2013 6:01 pm


Re: speedplay keep on kovers

Postby Baalzamon » Mon Jan 14, 2013 6:01 pm

When my new cleats arrive, I'm off to go get a bike fit done. I've got the fore/aft adapter kit which I'll have mounted already prior to going to the fit. I'll be going to see Damian Oldmeadow who I hope will take into account my metatarsal bursitis and move my cleats back away from forefeet area!
Masi Speciale CX 2008 - Brooks B17 special saddle, Garmin Edge 810
Posts: 4776
Joined: Mon Mar 12, 2007 1:23 pm
Location: Yangebup


Return to Buying a bike / parts

Who is online

Users browsing this forum: Bianchi 1954, Blue75, MattyK, Mediocratus

Popular Bike Shops
Wiggle Wiggle UK
Ground Effect Ground Effect NZ
Ebay Ebay AU
Chain Reaction Cycles CRC UK

“Bicycles BNA Twitter
“Bicycles BNA Facebook
“Google+ BNA Google+
“Bicycles BNA Newsletter

> FREE BNA Stickers