More light for street and off-road!
September 5, 2012
Philips presents LED products at the EUROBIKE 2012
EUROBIKE Friedrichshafen - very clear: the bicycle lighting can be not bright enough for safe driving in dark ways. More light for each environment presents Philips therefore from August 29 to September 1 at the EUROBIKE 2012: the new Philips Activeride LED Bikelight brings all the off-road fans with nine times more light than any standard bicycle light safely through the terrain. It goes back to the Strait, the glare-free on-road mode of the Activeride lamp is used. Philips in the new black & white Edition presents a real specialist for the road: with a sevenfold greater light output than any standard bicycle light this is one of the brightest, approved for road traffic lights on the market Saferide LED Bikelight 80 in the new design. And so that the bike from behind is good to see the new rear light Philips provides significantly more light - and in the width: thanks to the innovative Lightring technology that provides with a visibility of 220° for a wider to 40° light distribution as any standard backlight - LED Rearlight and is perceived so by other road users much earlier!
Bright in the terrain, glare-free on the road: Philips Activeride LED Bikelight
The new Philips Activeride LED Bikelight real off-road fans the freedom returns to go when and where they want. The extremely bright and wide light box in its high performance LEDs ensures very good orientation in any environment with taghellem, Crystal-white light (5,000 K). Every branch and every pothole is at an early stage spied with up to 70 Lux (CA. 800 lm). With its shock-resistant (IK06) as well as water and dust proof (IP64) aluminum with rubber protection ring the lamp defies any extreme use. Thanks to the new Philips dual-beam optics 50 Lux switches the Bikelight with just a push of a button to on-road mode with a strong, glare-free illumination of road up to 50 meters. Ensures that new 3D handlebar mount, to the optimal alignment of the light beam flexible in all directions move which allows a quick, tool-free mounting of the lamp on almost all types of handlebar.
Motorcycle light power meets design: Philips Saferide LED Bikelight as black & white Edition
Whether in classic stylish black or white purist and timeless: the Philips Saferide LED Bikelight 80 in the new black & white Edition is the bicycle-style in safe hands. The biker is it anyway: corresponds to the light output of the two LUXEON power LEDs of lighting a motorbike with 125 cc with a tremendous brightness level by up to 80 Lux. Obstacles up to 60 metres away can be recognized so clearly and distinctly, without dazzling oncoming traffic while. Is the total lighting power just not needed, because for example enough street lights are available and it is rather a question well to be seen much energy can be in the city-eco-mode save. The high-performance 80-Lux lighting is here reduced to 20 lux, the battery power to up to eight hours more than doubled. Its sturdy aluminum body can be mounted easily with the help of the new 3-axis handlebar on each bicycle handlebars.
Better visibility thanks to the new Lightring technology: Philips LED Rearlight
With the new Philips LED Rearlight in stylish round design is the bike now also from behind much earlier seen. This provides the innovative Lightring technology, which thus spread the light, that it also side is clearly visible. The angle of Rearlights is approximately 220°. The new rear light is as Dynamo as well as battery version available with and without Flash. The Dynamo version works with all dynamos. The robust plastic housing and long-life high performance LEDs make unnecessary a maintenance of Rücklichts. The Philips LED Rearlight can be mounted easily on all conventional bicycles. A flexible clip system allows the different mounting options. An integrated anti-theft finally prevents that Pilferer mount the Rearlight just as easily again.
Philips Activeride LED Bikelight
• 4 Of high LEDs of the latest generation
• Crystals white light (5,000 K)
• High performance reflector
• Maximum 70 lux (800lm) mode for use in the site
• Glare-free 50 lux mode for the road
• Weight: 456 g
• Weight Activeride DB 800 lm: 200 g
Battery pack weight: 256 g
• Battery type: lithium ion battery in flexible cover
•Battery capacity: 2200 mAh 11
• Battery burn time:
-Off-road mode: up to 2.5 hours
-On-road mode: up to 5 hours
-Safe ride home mode: up to 1 hour
• Shock-resistant, water and dust proof: IP64 & IK06
• 3D handlebar
• Aluminium housing with rubber protection ring
• Including Saddle bag for safe transport
• Retail price: 219.00 euro
Philips LED Rearlight
• High power LED
• LightRing technology with 220° of lateral visibility
• As Dynamo as well as battery version with and without flashing function
• Battery type: 2 AAA batteries
• Dynamo version works with all dynamos
• Easy installation with flexible clip system
• Theft protection
• StVZO approved
• Gross weight: 125 g
• Net weight: 80 g
• Dimensions (Lxwxh): 60 mm x 60 mm x 110 mm
• Retail price: 25.00 euro
Philips Annika Norlin Bikelight 80
• 2 High power LUXEON ® LEDs (80 LUX) of the latest generation
• 220 lumen with Crystal white light (5500 K)
• 80 lux measured at 10 meters in the light box
• Length of light box: 60 m
• Motorcycle-like lighting performance: to homogeneous to 60 metres of road lighting
• Glare-free light
• StVZO approved
• Net weight: 561 g
• Weight: 285 g
• Battery type: 4 NiMh AA battery
• Improved battery burn time (2600 mAh instead of 2450mAh)
Battery burn time:
-High power mode: up to 2.5 hours
-City-eco mode: up to 8 hours
• Water resistant aluminum casing
• New 3-axis handlebar
• Retail price: 119.00 euro
Save everyone looking for a translation