- Posts: 462
- Joined: Mon Sep 13, 2010 6:28 pm
- Location: Modbury SA
I am currently have some issues with descending and have been told to get my hands on the drops as it will be safer and easier to control. The problem I have is I have small hands and the distance to the brake leavers (shimano 105 flight deck) is too far for me to get a good safe grip in the leavers. I currently run a "low end" 3T bar that has a "shallow reach as fitted to my bike during a bike fit but as the fitter said it was still not great. I have tried to adjust the position of the leavers to get it better but then the hoods are way out of a comfortable position. Are there any brand of bars out there that are narrow (40cm) and have a very shallow reach.
- Posts: 3040
- Joined: Thu Aug 20, 2009 9:47 pm
- Location: Mackay, QLD
http://www.pro-liteoz.com/store/index.p ... oductId=84
If you bring the model up on www.pro-lite.net you'll see more detailed info.
Have you tried using the Shimano shims in the levers to bring them in closer? This is done without moving the lever on the bars, there is a little insert you can slide into them for people with small hands.
- Posts: 331
- Joined: Mon Nov 02, 2009 8:04 pm
- Location: Melbourne
liamb wrote:Are there any brand of bars out there that are narrow (40cm) and have a very shallow reach.
Have a look at the FSA Wing Pro Compacts, which go down to 38cm (but note the slight flare of the drops). They are shallow as well as having a short throw.
I think there was a neat list of shallow bars somewhere but I forget where. If I remember I'll let you know.
- Posts: 71
- Joined: Tue Aug 21, 2012 9:24 am
- Posts: 66
- Joined: Thu Aug 30, 2012 11:09 pm
liamb wrote:I have tried to adjust the position of the leavers to get it better but then the hoods are way out of a comfortable position.
Have you only been moving the mounting point of the shifters, or have you also adjusted the reach of the lever itself?
Before you buy any new bars make sure that you have explored adjusting the lever reach. What series 105 do you have?
I have smallish hands and have used the supplied wedges/shims to reduce the reach of both my 105 5700 and Ultegra 6700 levers on my road bikes - one with the aforementioned FSA Wing compact bars. I found 5mm was sufficient for me, but there is also a 10mm wedge.
On my old 105 5500-equipped bike I found descending in the drops downright scary. Whereas on my new bikes the combination of compact handlebars and reduced lever reach means I happily stay in the drops all the way down something like the Kinglake descent. Knowing the levers are comfortably resting under my fingertips means I literally descend a good 10km/h faster than I did before.
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Fixed Gear/ Single Speed
- Electric Bicycles
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Road Racing
- Road Biking
- Time Trial
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Western Australia
- New South Wales
- South Australia
- Northern Territory
- Country & Regional
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Cycling Brands
- Cell Bikes
- Malvern Star
- Santa Cruz
- Custom Builders
- Generic Carbon
Who is online
Users browsing this forum: Yahoo [Bot]
About the Australian Cycling Forums
The largest cycling discussion forum in Australia for all things bike; from new riders to seasoned bike nuts, the Australian Cycling Forums are a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.