Page 1 of 1

Where to buy Velocity deep V

Posted: Wed Nov 14, 2012 10:14 pm
by neild
I'm looking to buy 2 Velocity Deep V rims, 32 hole preferably non-machined sidewall and definitely black. I've seen them on Wheelbuilder.com but the postage is expensive and turns it into about $250 for the pair. For that price I'm sure I could go to the LBS and get them cheaper or at least the same price.

Does anyone know of somewhere else online to get Deep V's before I go looking at LBS's? I know there's plenty of rims out there but I'm pretty set on the Deep V's.

Thanks.

Re: Where to buy Velocity deep V

Posted: Wed Nov 14, 2012 11:00 pm
by jaseyjase
how about a wheelset for $220 delivered to your door? pending colour and spoke pattern

http://www.velomine.com/index.php?main_page=index&cPath=87_172_173&zenid=i2pe20mqr091mo726phpsdok94

Re: Where to buy Velocity deep V

Posted: Thu Nov 15, 2012 8:22 am
by rtnicho
+1 for Velomine. Haven't used their Deep Vs, but I've got a couple of other sets of their wheels e.g. Mavic Open pros laced to Origin 8 hubs with DT spokes. Couldn't he happier. Can't figure how they do it for the price.
Roger

Re: Where to buy Velocity deep V

Posted: Thu Nov 15, 2012 11:11 am
by Reman
The DT Swiss 585 rims are essentially identical to the Velocity Deep Vs, you can pick them up from CRC for under $70 each with free delivery.

Re: Where to buy Velocity deep V

Posted: Thu Nov 15, 2012 12:32 pm
by Crawf
About the only thing I order through LBS's is Velocity rims, you may be surprised at the price they can get them and pretty quick smart too.
I have one Black Deep-V non machined, that is used but great condition to sell. I also have 2 others that I'll need to offload but they'll be a few months off.

Re: Where to buy Velocity deep V

Posted: Thu Nov 15, 2012 1:41 pm
by neild
Hi Crawf,

how many holes are the ones your selling / planning on selling and what sort of $$ are you chasing? Are they all black non-machined? I'm in no rush as this is for a project that is probably a few months off anyway and will come together pretty slowly.

I'm going to be building one to an Alfine-11 hub and I'm just waiting for the Di2 version to be released before I make a decision, and that won't be until next year I think.

Re: Where to buy Velocity deep V

Posted: Thu Nov 15, 2012 9:19 pm
by rifraf
neild wrote:Hi Crawf,
I'm going to be building one to an Alfine-11 hub and I'm just waiting for the Di2 version to be released before I make a decision, and that won't be until next year I think.


I know they arnt the rims you prefer nor the Di2 version but......

WHEELS

Item: Alfine 11 Rear hub SG-S700/Alfine Dynamo Front hub DHS-500? laced to Rigida Taurus 700c/29" rims
Item Condition: New, never used
Price: $700
Reason for selling: Dream bike project abandoned
Extra Info: Black hubs, black rims, black spokes, silver nipples

viewtopic.php?f=25&t=55675&p=850674&hilit=alfine#p850674

Not mine - I spotted them in the forums marketplace.

Already built :)

Re: Where to buy Velocity deep V

Posted: Thu Nov 15, 2012 9:37 pm
by neild
Hi rifraf,

Thanks for the heads up. I had seen those but I've already built up a dynamo front earlier in the year. The whole build is a few months away, still deciding on parts so in no rush.

Cheers

Re: Where to buy Velocity deep V

Posted: Thu Nov 15, 2012 10:28 pm
by rifraf
neild wrote:Hi rifraf,

Thanks for the heads up. I had seen those but I've already built up a dynamo front earlier in the year. The whole build is a few months away, still deciding on parts so in no rush.

Cheers

Hi Neild
No worries, you've checked ebay and ticked the worldwide box? :idea:

Re: Where to buy Velocity deep V

Posted: Fri Nov 16, 2012 9:23 am
by Crawf
neild wrote:Hi Crawf,

how many holes are the ones your selling / planning on selling and what sort of $$ are you chasing? Are they all black non-machined? I'm in no rush as this is for a project that is probably a few months off anyway and will come together pretty slowly.

I'm going to be building one to an Alfine-11 hub and I'm just waiting for the Di2 version to be released before I make a decision, and that won't be until next year I think.


Hi Neil, all (x3) 32h black non machined. Shoot me a PM.