Shifter Shimano SL-R770 flat bar 20 sp.

Shifter Shimano SL-R770 flat bar 20 sp.

Postby rivettchris » Sat Jan 26, 2013 7:31 pm

I have Shifters Shimano SL-R770 flat bar 20 sp on my current bars but want new bars. Can someone tell me if a new bar needs to be 25.4 or 26mm for these to fit. Thanks
rivettchris
 
Posts: 1
Joined: Sat Jan 26, 2013 7:11 pm

by BNA » Sun Jan 27, 2013 8:12 am

BNA
 

Re: Shifter Shimano SL-R770 flat bar 20 sp.

Postby gururug » Sun Jan 27, 2013 8:12 am

So..... You should he more concerned with the handle diameter than the clamp diameter of the bars. I can't give you an crisp answer but most flat bars should fit. The fat section on oversized drop bars sometimes required the larger clamp size but is mostly required for crosstop levers. I am not familiar with those shifters. Does there appear to be a spacer under the clamp at present?
User avatar
gururug
 
Posts: 1499
Joined: Thu Jan 25, 2007 11:05 pm


Return to Shimano

Who is online

Users browsing this forum: No registered users



Top Bikes & Gear
Torpedo 7 Torpedo7 AU
Cell Bikes Cell Bikes AU
Ground Effect Ground Effect NZ
Ebay Ebay AU
Chain Reaction Cycles CRC UK
Wiggle Wiggle UK
ProBikeKit ProBikeKit UK
Evans Cycles Evans Cycles UK
JensonUSA Jenson USA
JensonUSA Competitive Cyclist