Old vs New SRAM Red Shifters

Old vs New SRAM Red Shifters

Postby RRalphy » Fri Nov 08, 2013 3:22 pm

Hi,
Currently pricing a new build and planning to get some SRAM Red shifters, I have sourced a set of the older style shifters purchased in 2009 (so obviously used to some degree though dont know how many kms) for around $250 and am weighing up if I should just bite the bullet and spend $470 on a new set of the latest mdoel shifters. I only ask as the cost of the build is starting to blow out from my initial expectations (always seems justified to spend just a little more on a component and then suddenly everything is upgraded...). Is the shifting with the new version that much better to justify $200 (10% of the cost of the build) more? presumably they will have less issues than the old used ones?
RRalphy
 
Posts: 143
Joined: Sat Sep 15, 2012 5:43 pm

by BNA » Sat Nov 16, 2013 9:01 am

BNA
 

Re: Old vs New SRAM Red Shifters

Postby flex5150 » Sat Nov 16, 2013 9:01 am

are you using a combination of red or going all "new red?
I have both styles and find the only difference is the ergo feel weight from memeory is the same.
One upgrade which is a must is the Yaw front mech. Ditch the ti 2011 red it was too flexy.
I used new mechs with old 2011 red cranks on my slr and it was the best shifting I had ever experienced.

someone is selling a bit of red2012 on ebay atm keep an eye on it.
oh and I have red cranks if you need them.
good luck with the build.
2012 Trek Madone 6.9 SSL. Now 6.01kg with zipp 202's
2014 Trek Madone 7s 6.28kg with Zipp 303's
User avatar
flex5150
 
Posts: 202
Joined: Thu May 23, 2013 5:39 pm
Location: Melbourne


Return to SRAM

Who is online

Users browsing this forum: No registered users



Support BNA
Click for online shops
Torpedo 7 Torpedo7 AU
Ground Effect Ground Effect NZ
Chain Reaction Cycles CRC UK
Wiggle Wiggle UK
Cycling Express Cycling Express
Ebay Ebay AU
ProBikeKit ProBikeKit UK
Evans Cycles Evans Cycles UK
JensonUSA Jenson USA
JensonUSA Competitive Cyclist